skip to content

Bobcat Has The Right Tool For The Job

Compatible with these machines

                 
Overview
Features
Specs
Compatible Carriers
Options & Accessories

Overview

Dig holes with speed and plumb-line accuracy using a Bobcat® auger attachment. Using heavy-duty hydraulics, the auger attachment bites into any soil condition with ease and efficiency. Even in hard and rocky soil, the high torque keeps the auger steady and powerful to maintain performance.

Choose between a direct drive auger for an optimum balance between torque and RPM, or a gear-driven planetary auger for applications that require the most torque. Multiple bit types and teeth enable you to find the right auger to match your digging conditions.

The direct drive 15 offers a higher range of speed for drilling holes quicker through softer to moderate soil conditions such as sand, dry material, and light dirt so the hole being dug is cleaned out better. The direct drive 30 and the planetary drive augers offer higher amount of torque for digging into heavier ground surfaces such as rocky, coral or clay. With lower speeds to dig, Planetary augers provide the torque needed to install screw anchors and dig with bits that are over 24 inches in diameter.

Digging Depth Challenge

Sometimes you need to dig deeper to prepare a footing or sump drain, reach stable subsoil or dig below the frost line. If an auger can't dig those extra inches in the hole, it might mean cutting corners or buying an auger extension. Bobcat augers provide design and geometry that helps do the job right. See how other brands compare.

Torque Challenge

With auger attachments, torque equals power. Greater torque makes it easier to break down rock, power through tree roots or clay, and take on frozen ground. All augers have published torque ratings, but performance on the jobsite matters most. The torque challenge video evaluates the difference.

Share

Digging Depth Challenge

Share

Torque Challenge

Share

Maintenance Comparison

How it works

Direct drive models use a directly mounted hydraulic motor, while planetary models are powered by a gear drive system. The motor turns the output shaft, which is connected to an auger bit to drill into the ground.

Top Tasks

  • Direct drive augers are ideal for digging holes for posts, piers, poles, or trees.
  • Planetary augers deliver the power and force needed to dig in anchor applications and through other extreme ground conditions including rock, shale, clay and frost.

Features

  • Added Digging Depth: Gain an extra foot of dig depth over competitive units because the entire drive unit follows the bit into the hole. Watch the digging depth challenge to see how other brands compare.
  • Improved Torque: Bobcat© auger attachments deliver greater torque when it matters most. All augers have published torque ratings, but performance on the jobsite matters most. The torque challenge video evaluates the difference.
  • Direct Drive: Provides optimum balance between torque and RPM to be used on a variety of jobs ranging from moderate to heavy digging.
  • Planetary Drive: Gear driven system provides the greatest amount of torque for extreme surfaces like breaking down rocks, powering through tree roots or clay, and taking on frozen ground. Planetary drives can also be operated with larger bits.
  • Combination Hex and Round Output Shaft: A patented Bobcat technology, the combination output shaft allows for both hex and round bits to be utilized, maximizing parts versatility (models 15C and 30C).
  • Versatile Mounting System: Easy and efficient for attaching the auger to the carrier. Quickly and easily switch to a variety of multiple carriers.
  • Unique Knuckle Joint Design: Allows the auger to dig vertical holes even if your Bobcat unit is on uneven terrain.
  • Auger Bits and Teeth: Choose from a wide variety of heavy duty and rock bits to match your digging conditions.

Specs

Model 10 Auger Model 15C/15H Auger Model 30C/30H Auger 35PH 50PH
Operating Weight 140 lbs 215 lbs 231 lbs 284 lbs 284 lbs
Length 8.44 in 10.59 in 10.59 in 11.42 in 11.42
Width 9.18 in 10.23 in 10.23 in 11.55 11.55
Height N/A 20.65 in 20.65 in 39.68 in 39.68
Dig Depth (without extensions) 58 in 62 in 62 in 73 in 73 in
Operating Weight (Less Bit) 264 lbs 406 lbs 425 lbs 452 lbs 452 lbs
Speed High Medium Low RPM @ 37GPM - 95 RPM @ 37 GPM - 82
Torque Low Medium High 4162 lbf. 5272 lbf.

Compatible Carriers

Model 10 Auger Model 15C/15H Auger Model 30C/30H Auger 35PH 50PH
All-Wheel Steer Loaders A770 - T4 A770 - iT4 A770 - T4 A770 - iT4 A770 - T4 A770 - iT4 A770 - T4 A770 - iT4
Compact Track Loaders T110 T450 T4 T110 T450 T4 T550 T4 T590 T4 T630 T4 T650 T4 T750 T4 T750 iT4 T770 T4 T770 iT4 T870 T4 T870 iT4 T450 T4 T550 T4 T590 T4 T630 T4 T650 T4 T750 T4 T750 iT4 T770 T4 T770 iT4 T870 T4 T870 iT4 T550 T4 T590 T4 T630 T4 T650 T4 T750 T4 T750 iT4 T770 T4 T770 iT4 T870 T4 T870 iT4 T550 T4 T590 T4 T630 T4 T650 T4 T750 T4 T750 iT4 T770 T4 T770 iT4 T870 T4 T870 iT4
Excavators 324 E20 Excavator E26 E26 (LA) T4 NA EXCAVATOR E26 T4 NA EXCAVATOR E26 E26 (LA) T4 NA EXCAVATOR E26 T4 NA EXCAVATOR E32 E32 T4 E32 T4 (EA) E32 T4 (LA) E32i T4 E32i T4 (EA) E32i T4 (LA) E35 E35 T4 E35 T4 (EA) E35 T4 (LA) E35i T4 E35i T4 (EA) E35i T4 (LA) E42 E42 T4 E45 E45 T4 E50 E50 T4 E55 E55 T4 E63 T4 E26 E26 (LA) T4 NA EXCAVATOR E26 T4 NA EXCAVATOR E32 E32 T4 E32 T4 (EA) E32 T4 (LA) E32i T4 E32i T4 (EA) E32i T4 (LA) E35 E35 T4 E35 T4 (EA) E35 T4 (LA) E35i T4 E35i T4 (EA) E35i T4 (LA) E42 E42 T4 E45 E45 T4 E50 E50 T4 E55 E55 T4 E63 T4 E80 E85 T4 E42 T4 E45 T4 E50 T4 E55 T4 E63 T4 E80 E85 T4 E42 T4 E45 T4 E50 T4 E55 T4 E63 T4 E80 E85 T4
Mini Loaders MT52 MT55
Skid-Steer Loaders S70 S100 S130 S175 S450 T4 S100 S130 S175 S450 T4 S510 T4 S530 T4 S550 T4 S570 T4 S590 T4 S630 T4 S650 T4 S750 - iT4 S750 T4 S770 - T4 S770 - iT4 S850 - T4 S850 - iT4 S130 S175 S450 T4 S510 T4 S530 T4 S550 T4 S570 T4 S590 T4 S630 T4 S650 T4 S750 - iT4 S750 T4 S770 - T4 S770 - iT4 S850 - T4 S850 - iT4 S510 T4 S530 T4 S550 T4 S570 T4 S590 T4 S630 T4 S650 T4 S750 - iT4 S750 T4 S770 - T4 S770 - iT4 S850 - T4 S850 - iT4 S550 T4 S570 T4 S590 T4 S630 T4 S650 T4 S750 - iT4 S750 T4 S770 - T4 S770 - iT4 S850 - T4 S850 - iT4
Utility Work Machine Toolcat 5600 G-Series Toolcat 5610 G-Series Toolcat 5600 G-Series Toolcat 5610 G-Series
VersaHandler TTC V417-Cab VersaHandler V417-Cab VersaHandler

Options & Accessories

  • Auger Bits and Teeth: Bobcat© branded auger components have a proven reputation for durability and performance. When drilling holes, match auger bits to every soil condition for smooth and easy cut holes. Find the bits and teeth to match your soil conditions.