1. Home
  2. Attachments
  3. Clamp – Standard & Pro-Clamp System (Compact Excavators)
Clamp
Attachment

Clamp
Attachment

Choose from two different clamp styles designed for Bobcat® compact excavators: the standard clamp or the Pro Clamp™ system. 

Standard Clamp 

  • Curved tine profile securely holds round and irregular objects 
  • Increased clearance sheds debris better 
  • Wide tine spacing provides great view to clamped objects 
  • Available as a factory-installed option on most compact excavator models

Pro Clamp System 

  • Adjust the Pro Clamp for the job at hand – grab large, small or irregular objects with greater grip 
  • Create a smooth trench bottom or clean spoil piles quickly with the optional grading tool – no need for a second “smooth-lip” bucket   
  • Available as a dealer-installed option for select Bobcat excavators 
Contact Dealer for Pricing

Top Tasks

Standard Clamp  

  • Lift and carry tree stumps, boulders, broken concrete and other irregular loads 
  •  Carefully place decorative stones and hardscape materials  
  • Separate timber piles  
  • Remove unwanted brush  
  • Unload pipe and lumber  
  • Accurately stack rocks or materials for retaining walls  

Pro Clamp System  

  • Create smooth trench bottoms  
  • Carry irregular rocks, broken concrete  
  • Perform demolition or tear-out work  
  • Clean up soil piles  
  • Install or repair utilities, removing the tool for optimum visibility  

How It Works

Standard Clamp  

Available for both the Bobcat X-Change™ and pin-grabber coupler systems. The Bobcat clamp has a curved tine profile that wraps securely around round, irregular and smaller objects – maximizing points of contact for better holding power. The wide tine spacing keeps the load visible for accurate placement. Wide clearance between the clamp structure and port fitting helps reduce the accumulation of debris. The Bobcat clamp is backward-compatible with most M-Series and R-Series excavators. 

Pro Clamp System  

Available in two sizes, the Pro Clamp includes a base component and a standard pin-on material work tool. Operators may choose the ideal tool position for grabbing large, small or irregular objects.  

The optional grading tool can serve as a smooth cutting edge when grading or trenching with a toothed bucket. It can also be reversed to serve as a clamshell when paired with a smooth lip bucket.  

The work tool may be removed when trenching. No tools are required to change or remove the work tool.  

Compatible with standard arm and long arm configurations but cannot be used with the extendable arm.

Compatible Models

Specifications

Units

General

Hydraulic Clamp - E42 & E45, Standard Arm
Hydraulic Clamp - E50, Standard Arm
Hydraulic Clamp - E20
Hydraulic Clamp - E32 & E35, Extendable Arm
Hydraulic Clamp - E32R2 & E35R2, Standard/Long Arm
Hydraulic Clamp - E42R2, Class III, Long Arm
Hydraulic Clamp - E42R2, E50R2 and E60R4
Hydraulic Clamp - E42R2, Long Arm w/TAG Bucket
Hydraulic Clamp - E42R2, Long Arm, Class III
Hydraulic Clamp - E60R2, Extendable Arm
Hydraulic Clamp - E80
Hydraulic Clamp - Standard Arm, E26
Pro Clamp - E32 & E35, Standard Arm, Class III
Pro Clamp - E42 & E45, Standard Arm
Clamp Width
14.9 in
14.9 in
5.4 in
13 in
13 in
14.4 in
14.9 in
16.5 in
13 in
13.4 in
15.9 in
Length
32 in
32 in
19.9 in
27.4 in
27.4 in
27.2 in
32.3 in
44 in
27.4 in
Tooth Radius
32 in
32 in
19.8 in
27.2 in
27.2 in
27.2 in
32.3 in
41 in
27.2 in
Tooth Thickness
1 in 
1 in 
0.5 in
0.75 in
0.75 in
0.75 in
1 in 
1 in 
0.75 in
Operating Weight
218 lbs
218 lbs
50 lbs
175 lbs
126 lbs
171 lbs
217 lbs
449 lbs
126 lbs
310 lbs
532 lbs
Width
14.9 in
14.9 in
13 in
13 in
14.4 in
41.9 
14.9 in
16.5 in
13 in
13.4 in

General

Hydraulic Clamp - E32R2 & E35R2, Standard/Long Arm
Hydraulic Clamp - E80
Hydraulic Clamp - E50, Standard Arm
Hydraulic Clamp - E42R2, Class III, Long Arm
Hydraulic Clamp - E42 & E45, Standard Arm
Hydraulic Clamp - E60R2, Extendable Arm
Hydraulic Clamp - E32 & E35, Extendable Arm
Hydraulic Clamp - Standard Arm, E26
Pro Clamp - E32 & E35, Standard Arm, Class III
Pro Clamp - E42 & E45, Standard Arm
Hydraulic Clamp - E20
Hydraulic Clamp - E42R2, E50R2 and E60R4
Hydraulic Clamp - E42R2, Long Arm w/TAG Bucket
Hydraulic Clamp - E42R2, Long Arm, Class III
Clamp Width
13 in
16.5 in
14.9 in
14.4 in
14.9 in
14.9 in
13 in
13 in
13.4 in
15.9 in
5.4 in
Length
27.4 in
44 in
32 in
27.2 in
32 in
32.3 in
27.4 in
27.4 in
19.9 in
Tooth Radius
27.2 in
41 in
32 in
27.2 in
32 in
32.3 in
27.2 in
27.2 in
19.8 in
Tooth Thickness
0.75 in
1 in 
1 in 
0.75 in
1 in 
1 in 
0.75 in
0.75 in
0.5 in
Operating Weight
126 lbs
449 lbs
218 lbs
171 lbs
218 lbs
217 lbs
175 lbs
126 lbs
310 lbs
532 lbs
50 lbs
Width
13 in
16.5 in
14.9 in
14.4 in
14.9 in
14.9 in
13 in
13 in
13.4 in
41.9 

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.