- Home
- Attachments
- Spreader
Spreader Attachment
Need to spread sand and salt for winter maintenance? The spreader attachment gets it done right and provides the versatility for all types of spreading jobs. Every model resists corrosion and stands up to tough sand and salt combinations.
Features & Benefits HS8 Spreader for Compact Loaders
Hydraulic Control and Convenience
The HS8 features an 8-cubic-foot hopper with the spread pattern controlled by a hydraulic motor and three flow gates that spread material from 18 feet to 28 feet.
Hopper Grate
The hopper grate filters unwanted debris from the spread material.
Self-Loading Hopper
The operator can use the hopper as a bucket, filling the spreader from a pile. Quickly and efficiently reload the spreading material into the hopper for big parking lot or road coverage jobs.
Sidewalk Kit (Optional)
The sidewalk kit keeps material from being cast out of the bounds of the sidewalk; compresses spread pattern between 29 and 38 inches.
Top Tasks
- Spread sand and salt for winter snow and ice removal.
- Minimize slippery surfaces during winter freezing and thawing.
- Maintain walkable and drivable roads and pathways during cold weather.
How It Works
The hydraulically powered HS8 can quickly connect to approved tool carriers with the Bob-Tach® attachment mounting system. Its self-loading hopper has an open top and can be used as a bucket to efficiently fill the spreader from a pile rather than pour material into the top. With a hopper volume of 8 cubic feet and a spread pattern that is controlled by three material flow gates, operators can spread material from 18 to 28 feet.
Bobcat also offers two cargo box-mounted spreaders designed for Bobcat® utility vehicles and Toolcat™ utility work machines, the SP9 and SP13, respectively. These tough, stainless-steel units allow for consistent, controlled material spread pattern of up to 30 feet, and they feature dash-mounted controls that are convenient and easy to use. A large 13.5 cubic foot hopper allows operators to carry more material for larger spreading jobs.
Compatible Models
Compact Track Loaders
11
Sand and Salt Spreader - HS8 | |
|---|---|
T450 | |
T550 | |
T62 | |
T64 | |
T650 | |
T66 | |
T740 | |
T76 | |
T770 | |
T86 | |
T870 |
Skid-Steer Loaders
12
Sand and Salt Spreader - HS8 | |
|---|---|
S450 | |
S510 | |
S590 | |
S62 | |
S64 | |
S650 | |
S66 | |
S740 | |
S76 | |
S770 | |
S850 | |
S86 |
Telehandlers
1
Sand and Salt Spreader - HS8 | |
|---|---|
TL519 |
Toolcat Utility Work Machines
2
Sand and Salt Spreader - HS8 | |
|---|---|
UW53 | |
UW56 |
Toolcat Work Machine, Non-current Models
2
Sand and Salt Spreader - HS8 | |
|---|---|
Bobcat UW53 | |
Bobcat UW56 |
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.