Latin America

North America

Southeast Asia

E17z Compact Excavators

Specifications & Options


Close/Open all PDF version
Operating weight
1,749 kg
Additional weight for long dozer blade
9 kg
Ground pressure with rubber tracks
30.1 kPa
Bucket pivot angle
196 °
Maximum reach of working equipment
3,971 mm
Maximum reach at ground level
3,923 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
1,560 mm
Maximum blade height
220 mm
Maximum blade height with long blade
300 mm
Maximum blade depth
204 mm
Maximum blade depth with long blade
254 mm
Maximum height of working equipment with dipperstick retracted
2,406 mm
Maximum bucket tooth height
3,378 mm
Maximum dump height
2,369 mm
Maximum depth of vertical wall which can be excavated
1,810 mm
Maximum digging depth
2,249 mm
(* Dentoes values which long dipperstick installed)
Blade height
235 mm
Clearance, upper structure to ground line
419 mm
Ground line to top of engine cover
1,138 mm
Length of track on ground
1,114 mm
Machine centre line to blade
1,045 mm
Minimum radius in travel position
2,715 mm
Overall length of track assembly
1,476 mm
Overall length in travel position
3,450 mm
Track lug height
25 mm
Blade width
980 mm
Blade width (extensions extended)
1,360 mm
2,297 mm
Track width
230 mm
Machine centre line to working equipment centre line, left-hand rotation
450 mm
Machine centre line to working equipment centre line, right-hand rotation
638 mm
Minimum turning radius
1,190 mm
Swing clearance, rear
690 mm
Working width at maximum right-hand rotation
1,532 mm
Working width at maximum left-hand rotation
1,370 mm
Make / model
Kubota / D722-E2B-BCZ-7
Number of cylinders
0.7 L
Maximum NET power (ISO 9249)
9.9 kW
Maximum NET torque (ISO 9249)
42.3 Nm
Digging force, dipperstick (ISO 6015)
9,108 N
Digging force, bucket (ISO 6015)
16,177 N
Drawbar pull
19,302 N
Travel speed, low range
2.5 km/h
Travel speed, high range
4 km/h
Pump type
Dual Outlet Variable Displacement Piston Pump With Gear Pumps
Pump capacity
41.3 L/min
Pump 1 capacity at 2500 RPM
11.3 L/min
Pump 2 and 3 capacity at 2500 RPM
15 L/min
Auxiliary flow
30 L/min
Auxiliary relief
180.0 bar
Boom port relief base and rod end
210.0 - 250.0 bar
Boom swing, left
80 °
Boom swing, right
60 °
Slew rate
10.1 RPM
Cooling system
3.3 L
Engine lubrication plus oil filter
3.3 L
Fuel reservoir
19 L
Hydraulic system
19 L
Noise level LpA(EU Directive 2006/42/EC)
81 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.1 ms-2
Hand-arm vibration (ISO 5349–1)
0.5 ms-2
  • TOPS/ROPS/FOPS canopy (1)
  • 980 mm dozer blade with two 190 mm blade extensions
  • Counterweight
  • 230 mm rubber track
  • Double acting auxiliary hydraulics
  • Control console locks
  • Horn
  • Hydraulic joystick controls
  • Retractable seat belt
  • Two speed travel
  • Full fuel warning alarm
  • Battery kill switch
  • Cupholders
  • Foldable and ergonomic pedals
  • Hydraulically retractable undercarriage from 1360 mm to 980 mm
  • Upper structure four point tie down
  • Work light
  • Engine with auto shutdown
  • Hydraulic and travel control lockout
  • Warranty: 12 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • Keyless start
  • Travel motion alarm
  • Long dozer blade
  • Auxiliary hydraulic line on arm
  • Boom load holding valve
  • Klac and Lehnhoff couplers
  • Object handling certification
  • Auxiliary quick couplers
  • Additional front lights and a rear light
  • Beacon
  • Fire Extinguisher
  • Mirrors
  • Water Separator
  • Special applications kit
  • Catalytic exhaust purifier kit

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.