Latin America

North America

Southeast Asia

Russia & CIS

E25 Compact Excavator

Specifications & Options

E25

Close/Open all PDF version
Operating weight with ROPS canopy , rubber tracks, counterweight and bucket:
2,441 kg
Additional weight for cab with heating
130 kg
Additional weight for long dipperstick
10 kg
Additional weight for counter weight
183 kg
Ground pressure with rubber tracks
30.2 kPa
(A)
Bucket pivot angle
185 °
(B)
Maximum reach of working equipment
4,678 mm
(B*)
Maximum reach of working equipment, long dipperstick
4,966 mm
(C)
Maximum reach at ground level
4,553 mm
(C*)
Maximum reach at ground level, long dipperstick
4,850 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,132 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,135 mm
(E)
Maximum blade height
385 mm
(F)
Maximum blade depth
315 mm
(G)
Maximum height of working equipment with dipperstick retracted
3,246 mm
(H)
Maximum bucket tooth height
4,272 mm
(H*)
Maximum bucket tooth height, long dipperstick
4,473 mm
(I)
Maximum dump height
3,057 mm
(I*)
Maximum dump height, long dipperstick
3,258 mm
(J)
Maximum depth of vertical wall which can be excavated
1,809 mm
(J*)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,078 mm
(K)
Maximum digging depth
2,582 mm
(K*)
Maximum digging depth, long dipperstick
2,890 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
330 mm
(B)
Clearance, upper structure to ground line
536 mm
(C)
Ground line to top of engine cover
1,456 mm
(D)
Length of track on ground
1,437 mm
(E)
Machine centre line to blade
1,462 mm
(F)
Minimum radius in travel position
3,347 mm
(G)
Overall length of track assembly
1,859 mm
(H)
Overall length in travel position
4,276 mm
(I)
Track lug height
25 mm
(J)
Blade width
1,400 mm
(K)
Height
2,412 mm
(L)
Track width
250 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
614 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
735 mm
(O)
Minimum turning radius
1,661 mm
(P)
Swing clearance, rear
770 mm
(P*)
Swing clearance, rear (zero tail swing), long dipperstick
840 mm
(Q)
Working width at maximum right-hand rotation
1,660 mm
(R)
Working width at maximum left-hand rotation
1,539 mm
Make / model
Kubota / D1105-E2B-BCZ-2
Fuel
Diesel
Number of cylinders
3
Displacement
1,123 cm3
Maximum NET power (ISO 9249)
13.3 kW
Maximum NET torque (ISO 9249)
65.8 Nm
Digging force, dipperstick (ISO 6015)
15,800 N
Digging force, long dipperstick (ISO 6015)
13,200 N
Digging force, bucket (ISO 6015)
22,200 N
Drawbar pull
30,200 N
Travel speed, low range
2.4 km/h
Travel speed, high range
4.6 km/h
Pump type
Dual outlet variable displacement piston pump with gear pumps
Piston pump capacity
28.8 L/min
Auxiliary flow
48 L/min
Auxiliary relief
180.0 bar
Boom swing, left
60 °
Boom swing, right
60 °
Slew rate
9.3 RPM
Cooling system
4.6 L
Engine lubrication plus oil filter
5.1 L
Fuel reservoir
34.6 L
Hydraulic system
25 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.4 ms-2
Hand-arm vibration (ISO 5349–1)
1.6 ms-2
  • 1400 mm dozer blade
  • 250 mm rubber track
  • Double acting auxiliary hydraulics
  • Clamp ready
  • Control console locks
  • Cupholder
  • Engine/hydraulic monitor with shutdown
  • Fingertip auxiliary hydraulic control
  • Horn
  • Hydraulic joystick controls
  • Seat
  • Retractable seat belt
  • TOPS/ROPS* canopy (1)
  • Two-speed travel
  • Work lights (boom and upperstructure)
  • Warranty: 12 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117.

  • Auxiliary hydraulic line on arm
  • Keyless start
  • Auto idle
  • TOPS/ROPS cab with heater
  • 2nd Auxiliary hydraulics
  • Suspension seat (vinyl)
  • Deluxe textile suspension seat
  • Boom safety valve
  • Boom & arm safety valves
  • Travel motion alarm
  • Direct return to tank
  • Long dipperstick with extra counterweight
  • AM/FM stereo radio
  • FOGS kit (Overhead guard)
  • Beacon kit
  • Left and right mirror kit
  • Additional work light kit
  • Fuel filter with transparent water separator