Middle East and Africa

North America

Russia & CIS

Southeast Asia

Loaders / S450 Skid-Steer Loader

Specifications & Options

Middle East & Africa Specifications

Product

Bobcat S450
DownloadSpecifications

European Specifications

S450

Close/Open all PDF version
Rated operating capacity (ISO 14397-1)
608 kg
Tipping load (ISO 14397-1)
1,215 kg
Pump capacity
64 L/min
System relief at quick couplers
22.4-23.1 MPa
Max. travel speed (high range - option)
14.8 km/h
Max. travel speed (low range)
11.4 km/h
Make / Model
Kubota / V2203-M-DI-E2B-BC-3
Fuel
Diesel
Cooling
Liquid
Power at 2800 RPM (ISO 14396 Gross)
35.9 kW
Torque at 1425 RPM (SAE J1995 Gross)
150 Nm
Number of cylinders
4
Displacement
2,196 cm3
Fuel tank
54.5 L
Operating weight
2,365 kg
Shipping weight
2,052 kg
(A)
Operating height
3,558 mm
(B)
Height with operator cab
1,976 mm
(C)
Angle of departure
23 °
(D)
Ground clearance
214 mm
(E)
Wheelbase
900 mm
(F)
Length without attachment
2,502 mm
(G)
Length with standard bucket
3,172 mm
(H)
Rollback at ground position
26 °
(I)
Dump height with standard bucket
2,157 mm
(J)
Height to bucket hinge pin
2,781 mm
(K)
Dump reach at maximum height
587 mm
(L)
Dump angle at maximum height
40 °
(M)
Rollback fully raised at maximum height
96 °
(N)
Width over standard bucket
1,575 mm
(O)
Turning radius with standard bucket
1,940.6 mm
(P)
Track, standard tyres
1,221.7 mm
(Q)
Width over standard tyres
1,490 mm
Vehicle steering
Direction and speed controlled by two hand levers
Loader hydraulics tilt and lift
Separate foot pedals or optional Advanced Control System (ACS) or Selectable Joystick Controls (SJC)
Front auxiliary (standard)
Electrical switch on right-hand steering lever
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
  • Cushion suspension seat
  • Automatically activated glow plugs
  • Auxiliary hydraulics: variable flow/maximum flow
  • Bob-Tach™ frame
  • Bobcat Interlock Control System (BICS)
  • 10 x 16.5, 10–ply, Heavy duty tyres
  • Deluxe operator cab* Includes interior cab foam, side, top and rear windows, Deluxe wire harness, dome light and electrical power port (1)
  • Electrically activated proportional front auxiliary hydraulics
  • Engine/hydraulics system shutdown
  • Instrumentation
  • Lift arm support
  • Noise reduction kit
  • Operating lights, front and rear
  • Parking brake
  • Seat belt
  • Seat bar
  • Spark arrestor muffler
  • CE certification
  • Warranty: 12 months or 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I

  • Factory Options
    • Deluxe instrument panel
    • Power Bob-Tach™
    • Cab enclosure
    • Cab enclosure with heating
    • Cab enclosure with HVAC
    • Hydraulic bucket positioning (including ON/OFF switch)
    • 10 x 16.5, 10–ply, Severe duty tyres
    • 10 x 16.5, 12–ply, Severe duty tyres, poly filled
    • 10 x 16.5, Solid Flex tyres
    • Advanced Control System (ACS)
    • Selectable Joystick Controls (SJC)
    • Air ride seat with 2 point seat belt
    • Radio
    • Strobe
    • Back-up alarm
    • Beacon
  • Dealer Installed Options
    • Cab enclosure kit
    • Special applications front door kit
    • 200 lbs (74.4 kg) counterweight kit
    • Front axle counterweight kit
    • Fuel cap locking kit
    • Deluxe instrument panel
    • Replacement Bob-Tach™
    • Fresh air heater kit
    • Front door kit
    • Door sensor kit
    • Plumbing kit for fresh air heater
    • Back up alarm kit
    • FOPS kit **
    • Single-point lift kit
    • Power Bob-Tach™ kit
    • Operator cab, CE, enclosure kit
    • 7-pin attachment control kit
    • Four-point lift kit
    • Rear auxiliary hydraulic kit
    • Engine block heater kit
    • Road kit
    • Bucket positioning kit
    • Keyless kit
    • Rear window wiper kit
    • 14-pin attachment control kit
    • 4-Way flasher kit
    • 80 mm Suspension seat kit
    • Cup holder kit
    • Headlight guard kit
    • Muffler guard kit
    • Tail light guard kit
    • Ride control
  • Angle Brooms
  • Augers
  • Backhoes
  • Bale Forks
  • Breakers
  • Brush Saws
  • Brushcat™ Rotary Cutters
  • Bucket Adapters
  • Combination Buckets
  • Concrete Mixers
  • Construction / Industrial Buckets
  • Diggers
  • Dozer Blades
  • Dumping Hoppers
  • Fertilizer and Grain Buckets
  • Flail Cutters
  • General Purpose (GP) Bucket
  • Graders
  • Grapples, Industrial
  • Landplanes
  • Landscape Rakes
  • Laser Equipment
  • Low Profile Buckets
  • Miscellaneous
  • Mowers
  • Packer Wheels
  • Pallet Fork Accessories
  • Pallet Forks, Hydraulic
  • Pallet Forks, Standard
  • Planers
  • Root Grapples
  • Scarifiers
  • Scrapers
  • Seeders
  • Skeleton Buckets
  • Snow & Light Material Buckets
  • Snow Blades
  • Snow Blowers
  • Snow Pushers
  • Snow V-Blades
  • Sod Layers
  • Soil Conditioners
  • Spare Wheels
  • Spreaders
  • Steel Tracks
  • Sweepers
  • Tillers
  • Tilt-Tatch
  • Trenchers
  • Utility Forks
  • Utility Frames
  • Vibratory Rollers
  • Water Kits
  • Whisker Brooms
  • Wood Chippers
Operator LpA(98/37 & 474-1)
87 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
101 dB(A)
Whole body vibration (ISO 2631–1) High speed
1.3 ms-2
Whole body vibration uncertainty
0.5 ms-2
Hand-arm vibration (ISO 5349–1) High speed
1.7 ms-2

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.