Latin America

North America

Southeast Asia

S530 Skid-Steer Loader

Specifications & Options

S530

Close/Open all PDF version
Rated operating capacity (ISO 14397-1)
869 kg
Tipping load (ISO 14397-1):
1,737 kg
Pump capacity
64.7 L/min
Pump capacity (with high flow option)
101.1 L/min
System relief at quick couplers
23.8-24.5 MPa
Max. travel speed (high range - option)
17.3 km/h
Max. travel speed (low range)
11.8 km/h
Make / Model
Kubota / V2203-M-DI-E2B-BC-3
Fuel
Diesel
Cooling
Liquid
Power at 2800 RPM (SAE J1995):
36.4 kW
Torque at 1425 RPM (SAE J1995 Gross)
150 Nm
Number of cylinders
4
Displacement
2,196 cm3
Fuel tank
93.7 L
Operating weight
2,815 kg
Shipping weight
2,476 kg
(A)
Operating height
3,901 mm
(B)
Height with operator cab
1,972 mm
(C)
Angle of departure
24.2 °
(D)
Ground clearance
185 mm
(E)
Wheelbase
1,082 mm
(F)
Length without attachment
2,657 mm
(G)
Length with standard bucket
3,378 mm
(H)
Rollback at ground position
30 °
(I)
Dump height with standard bucket
2,319 mm
(J)
Height to bucket hinge pin
3,023 mm
(K)
Dump reach at maximum height
828 mm
(L)
Dump angle at maximum height
42 °
(M)
Rollback fully raised at maximum height
97 °
(N)
Width over standard bucket
1,727 mm
(O)
Turning radius with standard bucket
2,024 mm
(P)
Track, standard tyres
1,374 mm
(Q)
Width over standard tyres
1,643 mm
Vehicle steering
Direction and speed controlled by two hand levers or optional Advanced Control System (ACS), Advanced Hand Controls (AHC) or Selectable Joystick Controls (SJC)
Loader hydraulics tilt and lift
Separate foot pedals or optional Advanced Control System (ACS), Advanced Hand Controls (AHC) or Selectable Joystick Controls (SJC)
Front auxiliary (standard)
Electrical switch on right-hand steering lever
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
  • Cushion suspension seat
  • Automatically activated glow plugs
  • Auxiliary hydraulics: variable flow/maximum flow
  • Bob-Tach™ frame
  • Bobcat Interlock Control System (BICS)
  • Deluxe operator cab with windows (1)
  • Electrically activated proportional front auxiliary hydraulics
  • Engine/hydraulics system shutdown
  • Hydraulic bucket positioning (including ON/OFF switch)
  • Instrumentation
  • Lift arm support
  • Noise reduction kit
  • Work lights, front and rear
  • Parking brake
  • Seat belt
  • Seat bar
  • Spark arrestor muffler
  • 10 x 16.5, 10–ply, Heavy duty tyres
  • CE certification
  • Warranty: 12 months or 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I

  • Factory Options
    • High-Flow hydraulics
    • Deluxe instrument panel
    • Power Bob-Tach™
    • Cab enclosure with heating
    • 10 x 16.5, 10–ply, Heavy duty tyres, offset rims
    • 10 x 16.5, 10–ply, Severe duty tyres
    • 12 x 16.5, 12–ply, Severe duty tyres, poly filled
    • 12 x 16.5, Solid flex tyres
    • 31 x 12-16.5, 10–ply, Superflotation tyres
    • Advanced Control System (ACS)
    • Advanced Hand Controls (AHC)
    • Selectable Joystick Controls (SJC)
    • Two speed
    • Air ride seat with 2 point seat belt
    • Back-up alarm
    • Beacon
    • Engine block heater
    • Fire extinguisher
    • Radio
    • Road kit
    • Strobe
  • Dealer Installed Options
    • Cab enclosure kit
    • Special applications front door kit
    • Front axle counterweight kit
    • Deluxe instrument panel
    • Replacement Bob-Tach™
    • Fresh air heater kit
    • Front door kit
    • Door sensor kit
    • Plumbing kit for fresh air heater
    • Back up alarm kit
    • FOPS kit **
    • Single-point lift kit
    • Power Bob-Tach™ kit
    • Operator cab, CE, enclosure kit
    • 7-pin attachment control kit
    • Four-point lift kit
    • Rear auxiliary hydraulic kit
    • Engine block heater kit
    • Road kit
    • Bucket positioning kit
    • Keyless kit
    • Rear window wiper kit
    • 14-pin attachment control kit
    • 4-Way flasher kit
    • 80 mm Suspension seat kit
    • Cup holder kit
    • Headlight guard kit
    • Muffler guard kit
    • Tail light guard kit
  • Angle Brooms
  • Augers
  • Backhoes
  • Bale Forks
  • Box Blades
  • Breakers
  • Brush Saws
  • Brushcat™ Rotary Cutters
  • Bucket Adapters
  • Combination Buckets
  • Concrete Mixers
  • Construction / Industrial Buckets
  • Diggers
  • Dozer Blades
  • Drop Hammers
  • Dumping Hoppers
  • Fertilizer and Grain Buckets
  • Flail Cutters
  • General Purpose (GP) Bucket
  • Graders
  • Grapples, Industrial
  • Landplanes
  • Landscape Rakes
  • Laser Equipment
  • Low Profile Buckets
  • Miscellaneous
  • Mixing Buckets
  • Mowers
  • Packer Wheels
  • Pallet Fork Accessories
  • Pallet Forks, Hydraulic
  • Pallet Forks, Standard
  • Planers
  • Rear Stabilizers
  • Root Grapples
  • Scarifiers
  • Scrapers
  • Seeders
  • Skeleton Buckets
  • Snow & Light Material Buckets
  • Snow Blades
  • Snow Blowers
  • Snow Pushers
  • Snow V-Blades
  • Sod Layers
  • Soil Conditioners
  • Spare Wheels
  • Spreaders
  • Steel Tracks
  • Stump Grinders
  • Sweepers
  • Tillers
  • Tilt-Tatch
  • Tree Transplanters
  • Trench Compactors
  • Trenchers
  • Utility Forks
  • Utility Frames
  • Vibratory Rollers
  • Water Kits
  • Whisker Brooms
  • Wood Chippers
Fuel consumption at 100% engine load
10.6 L/min
Fuel consumption at 70% engine load
8.7 L/min
Fuel consumption at 50% engine load
7.6 L/min
Fuel consumption at 30% engine load
7.2 L/min

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.