Middle East and Africa

North America

Russia & CIS

Southeast Asia

TR38160 EVO Rotary Telescopic Handler

Specifications & Options

TR38160 EVO IIIB

Close/Open all PDF version
Lifting height — on stabilisers
15,700 mm
Lifting height — on tyres
13,800 mm
Rated capacity
3,800 kg
Capacity (at max. height on stabilisers)
2,000 kg
Capacity (at max. height on tyres)
600 kg
Capacity (at max. reach on stabilisers)
300 kg
Capacity (at max. reach on tyres)
300 kg
Max. reach on stabilisers
13,350 mm
Max. reach on tyres
8,100 mm
On stabilisers, with forks, 90°
On tires, with forks, 90°
On tires, with forks, non rotated
On stabilisers, with rotated manplatform, 90°
On stabilisers, with winch, 90°
On stabilisers, with extended winch, 90°
On stabilisers, with hook, 90°
Weight (unladen)
13,700 kg
Standard tyres
400/70x20 inch
1st gear / low range
10 km/h
2nd gear / high range
26 km/h
Gradeability
22 °
Transmission
Hydrostatic with variable load sensing pump
Main drive
Servo-controlled 2-speed
Make / Model
Kubota / V3800 CR-TI - Stage IIIB
Fuel
Diesel
Cooling
Liquid
Rated power (ISO 14396:2002) at 2200 RPM
100 HP
Rated power (ISO 14396:2002) at 2200 RPM
74.5 kW
Maximum torque at 1400 RPM
335 Nm
Number of cylinders
4
Displacement
3,769 cm3
Pump type
Gear pump
Working pressure
230 bar
Pump capacity
110 L/min
Relief valve pressure setting
230 bar
Telescope in time at max. reach - no load
34.2 s
Telescope out time at max. reach - no load
21.9 s
Engine braking
Hydrostatic
Parking and emergency brake
Negative brake with electro control on rear axle
Engine oil
13.2 L
Fuel tank
180 L
Hydraulic reservoir
170 L
Operator noise level (LpA) (EN 12053)
103 dB(A)
Whole body vibration (EN 13059)
1.5 ms-2
Hand-arm vibration (ISO 5349–1)
4.5 ms-2
(A)
Overall length (with forks)
7,699 mm
(B)
Overall length (fork frame)
6,575 mm
(C)
Overall length (without attachment carriage)
6,290 mm
(D)
Overall length (without attachment)
5,116 mm
(F)
Overall height
3,000 mm
(G)
Carriage rotation angle
130 °
(I)
Height to back of the machine
2,380 mm
(J)
Ground clearance
510 mm
(L)
Front axle to front carriage
2,430 mm
(M)
Wheelbase
2,950 mm
(N)
Rear axle to back of machine
1,175 mm
(O)
Operator cab outside width
980 mm
(P)
Track width (front & rear)
1,920 mm
(Q)
Width over standard tyres
2,380 mm
(R)
External turning radius (with forks)
5,265 mm
(S)
External turning radius (at lifted stabilisers with blocks flipped over)
4,750 mm
(T)
External turning radius (at tyres)
4,430 mm
(U)
Internal turning radius
1,700 mm
(V)
Width with stabilisers down
3,968 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.