Latin America

North America

Southeast Asia

Telescopic Handlers / T35-130SLP Telescopic Handler

75HP Specifications

T35.130SLP 75 IIIB

Close/Open all PDF version
Lifting height — on stabilisers
12,468 mm
Lifting height — on tyres
12,242 mm
Rated capacity
3,500 kg
Capacity (at max. height on stabilisers)
3,500 kg
Capacity (at max. height on tyres)
3,000 kg
Capacity (at max. reach on stabilisers)
1,300 kg
Capacity (at max. reach on tyres)
400 kg
Max. reach on tyres
8,764 mm
With forks and standard 405/70x20 tyres, on stabilizers
With forks and standard 405/70x20 tyres
With forks and optional 400/80x24 tyres, on stabilisers
With forks and optional 400/80x24 tyres
With jib on 20 or 24 inch tyres, on stabilisers
With jib on 20 or 24 inch tyres
With extension jib on 20 or 24 inch tyres, on stabilisers
With extension jib on 20 or 24 inch tyres
Weight (unladen)
8,830 kg
Standard tyres
SOLIDEAL 405/70-20 16PR
1st gear / low range
4.2 km/h
1st gear / high range
20.5 km/h
Main drive
Hydrostatic motor
Transmission
Hydrostatic with electronic regulation
Make / Model
Bobcat D34
Fuel
Diesel
Cooling
Coolant
Rated power (ISO 14396:2002) at 2400 RPM
55.2 kW
Maximum torque at 1400 RPM
325 Nm
Number of cylinders
4
Displacement
3.4 L
Pump type
Gear pump with LS valve
Lift time - no load
15.8 s
Lower time - no load
9.9 s
Telescope in time at max. reach - no load
11.7 s
Telescope in time at max. height - no load
10.9 s
Telescope out time at max. reach - no load
20.7 s
Telescope out time at max. height - no load
20.7 s
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Fuel tank
145 L
Hydraulic reservoir
76 L
Operator noise level (LpA) (EN 12053)
74 dB(A)
Level of acoustic power (LWA)
104 dB(A)
Whole body vibration (EN 13059)
1.2 ms-2
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
7,081 mm
(B)
Overall length (fork frame)
5,876 mm
(C)
Overall length (without attachment)
5,541 mm
(D)
Overall length (Front tire to rear of machine)
4,497 mm
(E)
Overall height (with rotating beacon)
2,586 mm
(F)
Overall height
2,393 mm
(G)
Carriage rotation angle
124 °
(I)
Height to back of the machine
1,869 mm
(J)
Ground clearance
422 mm
(L)
Front axle to front carriage
1,919 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
1,107 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,992 mm
(Q)
Width over standard tyres
2,418 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,696 mm
(S)
External turning radius (at tyres)
4,150 mm
(U)
Internal turning radius
1,519 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.