Latin America

North America

Southeast Asia

Telescopic Handlers / T35-140S Telescopic Handler

75HP Specifications

T35.140S 75 IIIB

Close/Open all PDF version
Lifting height — on stabilisers
13,656 mm
Lifting height — on tyres (65°)
12,794 mm
Rated capacity
3,500 kg
Capacity (at max. height on stabilisers)
3,500 kg
Capacity (at max. height on tyres)
500 kg
Capacity (at max. reach on stabilisers)
1,000 kg
Capacity (at max. reach on tyres)
150 kg
Max. reach on tyres
9,449 mm
With forks and standard 400/80x24 tyres, on stabilisers
With forks and standard 400/80x24 tyres
With jib on 20 or 24 inch tyres, on stabilisers
With jib on 20 or 24 inch tyres
With extension jib on 20 or 24 inch tyres, on stabilisers
With extension jib on 20 or 24 inch tyres
Weight (unladen)
9,190 kg
Standard tyres
SOLIDEAL 400/80-24 20PR
1st gear / low range
4.8 km/h
1st gear / high range
24 km/h
Main drive
Hydrostatic motor
Transmission
Hydrostatic with electronic regulation
Make / Model
Bobcat D34
Fuel
Diesel
Cooling
Coolant
Rated power (ISO 14396:2002) at 2400 RPM
55.2 kW
Maximum torque at 1400 RPM
325 Nm
Number of cylinders
4
Displacement
3.4 L
Pump type
Gear pump with LS valve
Lift time - no load
15.8 s
Lower time - no load
9.9 s
Telescope in time at max. reach - no load
13.2 s
Telescope in time at max. height - no load
12.4 s
Telescope out time at max. reach - no load
23.4 s
Telescope out time at max. height - no load
23.4 s
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Fuel tank
145 L
Hydraulic reservoir
76 L
Operator noise level (LpA) (EN 12053)
74 dB(A)
Level of acoustic power (LWA)
104 dB(A)
Whole body vibration (EN 13059)
1.2 ms-2
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
7,313 mm
(B)
Overall length (fork frame)
6,108 mm
(C)
Overall length (without attachment)
5,709 mm
(D)
Overall length (Front tire to rear of machine)
4,573 mm
(E)
Overall height (with rotating beacon)
2,673 mm
(F)
Overall height
2,480 mm
(G)
Carriage rotation angle
124 °
(I)
Height to back of the machine
1,956 mm
(J)
Ground clearance
509 mm
(L)
Front axle to front carriage
2,151 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
1,107 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,992 mm
(Q)
Width over standard tyres
2,418 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,640 mm
(S)
External turning radius (at tyres)
4,150 mm
(U)
Internal turning radius
1,519 mm