Middle East and Africa

North America

Russia & CIS

Southeast Asia

Telescopic Handlers / T41-140 SLP Telescopic Handler

100HP Specifications

T41.140SLP 100 IV

Close/Open all PDF version
Lifting height — on stabilisers
13,656 mm
Lifting height — on tyres
13,300 mm
Rated capacity
4,100 kg
Capacity (at max. height on stabilisers)
4,100 kg
Capacity (at max. height on tyres)
2,500 kg
Capacity (at max. reach on stabilisers)
1,250 kg
Capacity (at max. reach on tyres)
500 kg
Max. reach on tyres
9,449 mm
With forks and standard 400/80x24 tyres, on stabilisers
With forks and standard 400/80x24 tyres
With jib on 20 or 24 inch tyres, on stabilisers
With jib on 20 or 24 inch tyres
With extension jib on 20 or 24 inch tyres, on stabilisers
With extension jib on 20 or 24 inch tyres
With 1m, 220 kg manplatform on 24 inch tyres, on stabilisers
With 2-4 m, 300 kg manplatform on 24 inch tyres, on stabilisers
With 2-4 m, 800 kg manplatform on 24 inch tyres, on stabilisers
With 4 T winch on 24 inch tyres, on stabilisers
Weight (unladen)
10,530 kg
Standard tyres
DUNLOP 400/80-24 156B T37
1st gear / low range
8.5 km/h
1st gear / high range
30 km/h
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
Bobcat D34
Fuel
Diesel
Cooling
Coolant
Rated power (ISO 14396:2002) at 2400 RPM
100 HP
Rated power (ISO 14396:2002) at 2400 RPM
74.5 kW
Maximum torque at 1400 RPM
430 Nm
Number of cylinders
4
Displacement
3.4 L
 
 
*Stage IIIB Bobcat D34 also available in 55kW/75HP version (without SCR/Ad-Blue after-treatment)
 
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
255 bar
Lift time - no load
12.8 s
Lower time - no load
8.4 s
Telescope in time at max. reach - no load
12.9 s
Telescope in time at max. height - no load
11.3 s
Telescope out time at max. reach - no load
18.8 s
Telescope out time at max. height - no load
18.8 s
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Fuel tank
145 L
Hydraulic reservoir
76 L
Operator noise level (LpA) (EN 12053)
78 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
1.2 ms-2
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
7,313 mm
(B)
Overall length (fork frame)
6,108 mm
(C)
Overall length (without attachment)
5,709 mm
(D)
Overall length (Front tire to rear of machine)
4,573 mm
(E)
Overall height (with rotating beacon)
2,673 mm
(F)
Overall height
2,480 mm
(G)
Carriage rotation angle
124 °
(I)
Height to back of the machine
1,956 mm
(J)
Ground clearance
509 mm
(L)
Front axle to front carriage
2,151 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
1,107 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,992 mm
(Q)
Width over standard tyres
2,418 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,745 mm
(S)
External turning radius (at tyres)
4,150 mm
(U)
Internal turning radius
1,519 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.