Middle East and Africa

North America

Russia & CIS

Southeast Asia

Telescopic Loaders / TL35.70 Telescopic Loader

Specifications & Options

TL35.70 100 IV

Close/Open all PDF version
Lifting height — on tyres
6,889 mm
Rated capacity
3,500 kg
Capacity (at max. height on tyres)
3,500 kg
Capacity (at max. reach on tyres)
1,500 kg
Max. reach on tyres
4,002 mm
With forks on 20 inch tyres
With forks on 24 inch tyres
With jib on 20 or 24 inch tyres
Weight (unladen)
7,330 kg
Standard tyres
SOLIDEAL 405/70-20 14PR
1st gear / low range (40 km/h option)
6 (6) km/h
1st gear / high range (40 km/h option)
11 (12) km/h
2nd gear / low range (40 km/h option)
16 (18) km/h
2nd gear / high range (40 km/h option)
30 (40) km/h
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor + 2 speed gearbox
Make / Model
Bobcat D34
Fuel
Diesel
Cooling
Coolant
Rated power (ISO 14396:2002) at 2400 RPM
100 HP
Rated power (ISO 14396:2002) at 2400 RPM
74.5 kW
Maximum torque at 1400 RPM
430 Nm
Number of cylinders
4
Displacement
3.4 L
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
250 bar
Lift time - no load
8 s
Lower time - no load
6 s
Telescope in time at max. reach - no load
6.5 s
Telescope in time at max. height - no load
6.5 s
Telescope out time at max. reach - no load
7.1 s
Telescope out time at max. height - no load
7.1 s
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Fuel tank
138 L
Hydraulic reservoir
59 L
Operator noise level (LpA) (EN 12053)
74 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
1.2 ms-2
(-)
Operator cab inside width
900 mm
(A)
Overall length (with forks)
6,074 mm
(B)
Overall length (fork frame)
4,869 mm
(C)
Overall length (without attachment)
4,763 mm
(D)
Overall length (Front tire to rear of machine)
4,058 mm
(E)
Overall height (with rotating beacon)
2,477 mm
(F)
Overall height
2,290 mm
(G)
Carriage rotation angle
135 °
(I)
Height to back of the machine
1,668 mm
(J)
Ground clearance
346 mm
(L)
Front axle to front carriage
1,356 mm
(M)
Wheelbase
2,870 mm
(N)
Rear axle to back of machine
643 mm
(O)
Operator cab outside width
1,013 mm
(P)
Track width (front & rear)
1,895 mm
(Q)
Width over standard tyres
2,300 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
4,925 mm
(R)
External turning radius (with forks spaced 1360 mm apart)
5,015 mm
(S)
External turning radius (at tyres)
3,714 mm
(U)
Internal turning radius
1,092 mm