Latin America

North America

Southeast Asia

Russia & CIS

Compact Excavators / E20 Compact Excavator

Specifications & Options

E20

Close/Open All PDF version
Operating weight
1,930 kg
Additional weight for cab with heating
81 kg
Additional weight for long dipperstick
6 kg
Additional weight for long dozer blade
9 kg
Ground pressure with rubber tracks
31.1 kPa
(A)
Bucket pivot angle
196 °
(B)
Maximum reach of working equipment
4,134 mm
(B*)
Maximum reach of working equipment, long dipperstick
4,307 mm
(C)
Maximum reach at ground level
4,089 mm
(C*)
Maximum reach at ground level, long dipperstick
4,264 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
1,592 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
1,611 mm
(E)
Maximum blade height
220 mm
(F)
Maximum blade depth
204 mm
(G)
Maximum height of working equipment with dipperstick retracted
2,564 mm
(H)
Maximum bucket tooth height
3,573 mm
(H*)
Maximum bucket tooth height, long dipperstick
3,701 mm
(I)
Maximum dump height
2,566 mm
(I*)
Maximum dump height, long dipperstick
2,693 mm
(J)
Maximum depth of vertical wall which can be excavated
1,948 mm
(J*)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,115 mm
(K)
Maximum digging depth
2,385 mm
(K*)
Maximum digging depth, long dipperstick
2,565 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
235 mm
(B)
Clearance, upper structure to ground line
419 mm
(C)
Ground line to top of engine cover
1,138 mm
(D)
Length of track on ground
1,258 mm
(E)
Machine centre line to blade
1,045 mm
(F)
Minimum radius in travel position
2,882 mm
(G)
Overall length of track assembly
1,620 mm
(H)
Overall length in travel position
3,688 mm
(H*)
Overall length in travel position, long dipperstick
3,669 mm
(I)
Track lug height
25 mm
(J)
Blade width
980 mm
(J*)
Blade width (extensions extended)
1,360 mm
(K)
Height
2,297 mm
(L)
Track width
230 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
476 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
638 mm
(O)
Minimum turning radius
1,190 mm
(P)
Swing clearance, rear
690 mm
(Q)
Working width at maximum right-hand rotation
1,532 mm
(R)
Working width at maximum left-hand rotation
1,370 mm
Make / model
Kubota / D722-E2B-BCZ-7
Fuel
Diesel
Number of cylinders
3
Displacement
0.7 L
Maximum NET power (ISO 9249)
9.9 kW
Maximum NET torque (ISO 9249)
42.3 Nm
Digging force, dipperstick (ISO 6015)
10,371 N
Digging force, long dipperstick (ISO 6015)
9,279 N
Digging force, bucket (ISO 6015)
20,835 N
Drawbar pull
19,302 N
Travel speed, low range
2.5 km/h
Travel speed, high range
4 km/h
Pump type
Dual piston pump with gear pump
Pump capacity
41.3 L/min
Pump 1 capacity at 2500 RPM
11.3 L/min
Pump 2 and 3 capacity at 2500 RPM
15 L/min
Auxiliary flow
30 L/min
Auxiliary relief
180.0 bar
Boom port relief base and rod end
210.0 - 250.0 bar
Boom swing, left
80 °
Boom swing, right
60 °
Slew rate
8.4 RPM
Cooling system
3.3 L
Engine lubrication plus oil filter
3.3 L
Fuel reservoir
19 L
Hydraulic system
19 L
Noise level LpA(EU Directive 2006/42/EC)
82 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.7 ms-2
Hand-arm vibration (ISO 5349–1)
1.6 ms-2
Hand-arm vibration (ISO 5349–1) Uncertainty
0.4 ms-2
  • TOPS/ROPS/FOPS canopy (1)
  • 980 mm dozer blade with two 190 mm blade extensions
  • Heavy counterweight
  • 230 mm rubber track
  • Double acting auxiliary hydraulics with quick couplers
  • Control console locks
  • Horn
  • Hydraulic joystick controls
  • Retractable seat belt
  • Two-speed travel
  • Full fuel warning alarm
  • Battery kill switch
  • Cupholders
  • Foldable and ergonomic pedals
  • Hydraulically retractable undercarriage from 1360 mm to 980 mm
  • Upper structure four point tie down
  • Work light
  • Engine with auto shutdown
  • Hydraulic and travel control lockout
  • Warranty: 12 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • TOPS/ROPS cab with heater
  • Keyless start
  • Travel motion alarm
  • Cab enclosure, vinyl
  • Cab/canopy light kit
  • Special applications kit
  • Long dipperstick
  • Long dozer blade
  • AM/FM MP3 stereo radio
  • 2nd Auxiliary hydraulics
  • Auxiliary hydraulic line on arm
  • Boom load holding valve
  • Hydraulic clamp
  • Comfort package (Superior seat for canopy or cloth suspension seat for cab, Autospeed shift, Aux and Off-set pilot control)
  • Klac and Lehnhoff couplers
  • Object handling certification