Latin America

North America

Southeast Asia

Russia & CIS

Compact Excavators / E32 Compact Excavator

Specifications & Options

E32

Close/Open All PDF version
Operating weight
3,294 kg
Additional weight for cab with heating
121 kg
Additional weight for cab with HVAC
140 kg
Additional weight for steel tracks
96 kg
Ground pressure with rubber tracks
29.2 kPa
(A)
Bucket pivot angle
185 °
(B)
Maximum reach of working equipment
5,101 mm
(B)
Maximum reach of working equipment, long dipperstick
5,383 mm
(C)
Maximum reach at ground level
4,980 mm
(C*)
Maximum reach at ground level, long dipperstick
5,270 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,017 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,077 mm
(E)
Maximum blade height
376 mm
(F)
Maximum blade depth
371 mm
(G)
Maximum height of working equipment with dipperstick retracted
3,708 mm
(H)
Maximum bucket tooth height
4,804 mm
(H*)
Maximum bucket tooth height, long dipperstick
4,985 mm
(I)
Maximum dump height
3,437 mm
(I*)
Maximum dump height, long dipperstick
3,618 mm
(J)
Maximum depth of vertical wall which can be excavated
2,136 mm
(J)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,414 mm
(K)
Maximum digging depth
3,117 mm
(K*)
Maximum digging depth, long dipperstick
3,417 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
353 mm
(B)
Clearance, upper structure to ground line
537 mm
(C)
Ground line to top of engine cover
1,473 mm
(D)
Length of track on ground
1,543 mm
(E)
Machine centre line to blade
1,546 mm
(F)
Minimum radius in travel position
3,537 mm
(G)
Overall length of track assembly
1,964 mm
(H)
Overall length in travel position
4,662 mm
(H*)
Overall length in travel position, long dipperstick
4,761 mm
(I)
Track lug height
23 mm
(J)
Blade width
1,520 mm
(K)
Height
2,429 mm
(L)
Track width
300 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
371 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
554 mm
(O)
Minimum turning radius
1,623 mm
(P)
Swing clearance, rear
1,125 mm
(Q)
Working width at maximum right-hand rotation
1,982 mm
(R)
Working width at maximum left-hand rotation
1,839 mm
Make / model
Kubota / D1803-M-D1-E3B-BC-3
Fuel
Diesel
Number of cylinders
3
Displacement
1,862 cm3
Maximum NET power (ISO 9249)
23.1 kW
Maximum NET torque (ISO 9249)
107.4 Nm
Digging force, dipperstick (ISO 6015)
21,000 N
Digging force, long dipperstick (ISO 6015)
18,320 N
Digging force, bucket (ISO 6015)
31,500 N
Drawbar pull
34,132 N
Travel speed, low range
2.6 km/h
Travel speed, high range
4.7 km/h
Pump type
Single outlet variable displacement, load sensing torque limited pump
Piston pump capacity
100.8 L/min
Auxiliary flow
63.9 L/min
Auxiliary relief
206.0 bar
Boom swing, left
77 °
Boom swing, right
55 °
Slew rate
8.6 RPM
Cooling system
8 L
Engine lubrication plus oil filter
5.2 L
Fuel reservoir
53.1 L
Hydraulic system
39.7 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
94 dB(A)
Whole body vibration (ISO 2631–1)
0.2 ms-2
Hand-arm vibration (ISO 5349–1)
0.4 ms-2
  • 1520 mm dozer blade
  • 300 mm rubber tracks
  • Auto idle
  • Auto shift travel
  • Auxiliary hydraulics with Quick Couplers
  • Selectable auxiliary hydraulic flow
  • Blade float feature
  • Clamp ready
  • Control console locks
  • Cupholder
  • Engine/hydraulic monitor with shutdown
  • Fingertip auxiliary hydraulic control
  • Horn
  • Full fuel warning alarm
  • Hydraulic joystick controls
  • Retractable seat belt
  • Suspension seat with high back
  • TOPS/ROPS* canopy (1)
  • Two-speed travel
  • Work lights (boom and upperstructure)
  • Warranty: 12 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117.

  • Air conditioning
  • TOPS/ROPS cab with heater
  • Long dipperstick
  • 2nd Auxiliary hydraulics
  • Deluxe textile suspension seat
  • Boom safety valve with overload warning
  • Boom & arm safety valves with overload warning
  • AM/FM stereo radio
  • FOGS kit (Overhead guard)
  • Lifting chain kit
  • Travel motion alarm
  • Steel tracks
  • Beacon kit
  • Left and right mirror kit
  • Additional work light kit
  • Rubber bolt-on pads for steel tracks
  • Special applications kit
  • Fuel filter with transparent water separator