MENU
When working conditions get tough, fight back with the vertical lift path Bobcat® T750 compact track loader.
Superior flotation, traction and performance let the T750 keep going when other loaders give up. It also has the M-Series comfort features you require including excellent visibility, larger cab entry, larger windows and simple controls. Enjoy 11 feet of vertical lift and 23 gpm standard hydraulic flow. Add the optional high flow to boost your productivity to 36.5 gpm.
Provides communication between the attachment and loader.
Easily change attachments in less than a minute.
Control the drive, engine torque and tractive effort without an engine anti-stall system robbing you of power when you need it most.
Increase lifting performance with certain attachments by adding free-mounted counterweights.
Hydraulic pumps are matched to cylinder size and loader lift capacity, helping you get your work done faster.
Keeps your bucket level when raising lift arms, reducing spillage and allowing you to work more efficiently.
Reach maximum torque at a lower RPM to minimize stalling while saving time and fuel.
Change non-hydraulic attachments by flipping a switch from the comfort of your cab.
Highly-efficient hydraulic pumps deliver more power that's matched to each movement.
Simply push the coupler inward to release the hydraulic oil through a return line back into the machine. The result is clean, quick attachment changes.
Equip your loader to operate remotely in certain environments. The system is easy to install and easy to operate. SJC is required for this option.
Enjoy a smoother ride with cushioning of the loader circuit.
As the first suspension system for compact track loaders, the all steel design gives you increased durability.
Get better control and more comfort. SJC features speed and horsepower management, drive response, steering drift compensation, selectable control pattern and increased comfort.
Boost top travel speed and reduce the time it takes to travel across a jobsite or between jobs. SJC required. Not available on T550,T590.
The engine, hydraulic pump, horsepower and cubic-inch displacement are precisely configured for each machine's specific operating capacity.
Watch Hydraulic Power Challenge Video
Watch Suspension Comparison Video
Watch Lift Breakout Challenge Video
Watch Multifunction Challenge Video
Achieve optimal suspension comfort with air ride seats that smooth out bumps and increase comfort.
Visibility has been significantly increased in all directions. The rear window is 14 percent larger and the size of the top window is now 43 percent larger, providing a big advantage when loading a truck or using attachments with raised lift arms.
Puts the you closer to the attachment and enables you to see your work better.
The engine speed control has been moved out in front of the operator, on the right-hand corner post of the cab.
Cup holders hold everything from 20 oz. soda bottles to super-sized cups and coffee mugs.
Helps you monitor key loader functions from easy-to-read virtual gauges on the 7 in. color LED screen and includes keyless start to help prevent machine theft.
Slide open and lock the side windows into one of five positions.
Windows are mounted on the outside of the Roll-Over Protection System (ROPS), which provides extra elbow room in the cab and makes window cleaning much faster.
Attachments are controlled easily and adjusted simply from the fingertip controls. They're also more comfortable to operate.
Two clean-out holes in the foot well allow for easier removal of mud and debris that enter the cab.
Work in comfort with air movement, temperature control and greater flexibility in directing air. Because optional AC units are integrated into the machine, there is no bulky add-on unit to obstruct your visibility.
A best-in-class pressurized interior helps keep your cab clean and dust-free. A new, one-piece pressure seat engages the entire door on the front and sides, compressing the door seal into a specialized curved door pocket.
Machines with an enclosed cab feature large, swing-open doors, which provide ample room for exit and entry. A lowered door threshold gives you increased visibility to your attachment and the surrounding work area – making it easier to see and do your work.
Stronger, narrower loader arms make a wider cab possible, with up to 20 percent more interior space than competitors.
Puts important controls in front of you on the cab corner posts.
Sound within the cab is reduced by more than 60 percent for a more comfortable and quieter working environment. Quieter than ordinary cooling fans, Bobcat’s hydraulic-powered SmartFAN senses the temperature of the machine and only turns as fast as needed.
Defrosts the new, larger rear window with new rear air ducts.
On M-Series loaders with Selectable Joystick Controls, the joysticks are mounted to the seat. As your suspension seat moves up and down, the joysticks move with the seat for added comfort while operating.
Storage bins are located throughout the machine.
Easily adjust the suspension seat to the operator's weight.
Power your phone, MP3 player or other accessories.
Lighting circuit automatically shuts down to prevent accidental battery discharge when the lights are left on after the work is done.
Cool, clean air is drawn from above through the oil cooler and radiator, with small amounts of hot air from the engine compartment. Air is exhausted out two side vents, keeping hot air away from the operator.
Enables easy, quick hydraulic oil checks through a gauge that’s visible as you walk by the loader.
Tracks engine coolant temperature, engine oil pressure and hydraulic oil temperature and shuts down the loader's engine when there's a problem to prevent damage.
Light output is now increased by over 50 percent. This new lighting system emits a high-intensity beam that illuminates a broad working area around the front of the machine.
Loader radiator and hydraulic oil cooler are well protected between the frame uprights, above the engine and out of danger.
Integrated, pressure-release quick couplers are mounted directly into the front plate of the lift arm - with no exposed hoses to damage. Couplers are protected even further with a guard that extends out beyond the coupler.
Hoses are run through the loader arms and frame uprights for better protection. High-quality steel tubing is used in the areas that are exposed to outside elements. The simplicity in the design is that hoses are less likely to be snagged and broken if they are not exposed.
The lower rear frame sticks out past the tailgate, protecting it from obstacles, scrapes and bumps.
Provides better auxiliary hose routing and security; slide the guide onto your hydraulic hose and clip it on the machine before operation. Clip the house in the attachment frame when it isn’t in use.
On-board diagnostics efficiently troubleshoot problems in the field or prevent them before they occur. Downloadable machine performance history lets you identify potential problems and correct them.
Secure you loader quickly, without searching for hard-to-reach tie-downs.
Every pin and connecting point is on the same plane, which greatly reduces side deflection of the lift arm and increases lift arm life.
Enjoy the fastest and easiest maintenance in the industry. Perform daily maintenance like checking the engine fluids, filters, battery and air cleaner simply by opening the tailgate.
The one piece 3/8”inch thick door is solid steel. There are no cooling holes, slots or other openings on the heavy-duty door that could potentially lead to extra time in the shop.
Non-routine maintenance items can be accessed easily, so you can spend time on maintenance or repair, not gaining access.
Get the world's only comprehensive training program when you purchase Bobcat equipment.
Loader engines can run slower, resulting in a quieter machine that lasts longer. This belt-drive system allows loaders to use an optimized engine-to-pump package, making it more efficient.
Use a dash-mounted switch to instantly select between advanced hand control or advanced foot control of lift and tilt functions. Not available on the T870.
Get better control and more comfort. SJC features speed and horsepower management, drive response, steering drift compensation, selectable control pattern and increased comfort.
Equip your loader to operate remotely in certain environments. The system is easy to install and easy to operate. SJC is required for this option.
Achieve optimal suspension comfort with air ride seats that smooth out bumps and increase comfort.
Work in comfort with air movement, temperature control and greater flexibility in directing air. Because optional AC units are integrated into the machine, there is no bulky add-on unit to obstruct your visibility.
Helps you monitor key loader functions from easy-to-read virtual gauges on the 7 in. color LED screen and includes keyless start to help prevent machine theft.
Keeps your bucket level when raising lift arms, reducing spillage and allowing you to work more efficiently.
Listen to music while you work with the optional radio, which includes an audio input to connect an MP3 player or other device.
Enjoy a smoother ride with cushioning of the loader circuit.
As the first suspension system for compact track loaders, the all steel design gives you increased durability.
On M-Series loaders with Selectable Joystick Controls, the joysticks are mounted to the seat. As your suspension seat moves up and down, the joysticks move with the seat for added comfort while operating.
Simply push the coupler inward to release the hydraulic oil through a return line back into the machine. The result is clean, quick attachment changes.
Experience even quieter operation with the sound reduction package.
Boost top travel speed and reduce the time it takes to travel across a jobsite or between jobs. SJC required. Not available on T550,T590.
Provides communication between the attachment and loader.
Change non-hydraulic attachments by flipping a switch from the comfort of your cab.
Provides additional hydraulic power to boost production of attachments.
Makes cold engine starts easier.
| Engine | T750 |
|---|---|
| Engine Cooling | Liquid |
| Emissions Tier (EPA) | Interim Tier 4 |
| Engine Fuel | Diesel |
| Horsepower | 85 HP |
| Turbocharged Engine | Yes |
| Performance | T750 |
|---|---|
| Rated Operating Capacity (SAE) | 3325 lbs |
| Operating Capacity (50% of Tip) | 4750 lbs |
| Tipping Load | 9500 lbs |
| Operating Weight | 10327 lbs |
| Travel Speed | 6.6 mph |
| Travel Speed (2-speed option) | 10.7 mph |
| Ground Presssure (Rubber) | 4.2 psi |
| Capacities | T750 |
|---|---|
| Fuel Tank | 27.2 gal |
| Hydraulic System | T750 |
|---|---|
| System Relief @ Quick Couplers | 3500 psi |
| Auxiliary Std Flow | 23 GPM |
| Auxiliary High Flow | 36.5 GPM |
| Dimension | T750 |
|---|---|
| Length | 114.3 in |
| Length without Attachment | 114.3 in |
| Length with Standard Bucket | 141.6 in |
| Width | 78 in |
| Width (with bucket) | 80 in |
| Height | 81.3 in |
| Height with Operator Cab | 81.3 in |
| Height to Bucket Hinge Pin | 132 in |
| Reach @ Maximum Height | 33.6 in |
| Turning Radius | 88 in |
| Length of track on ground | 63.7 in |
| Track Width | 17.7 in |
| Track Width - Optional | 12.6 in |
| Features | T750 |
|---|---|
| Joystick Control |  |
| Air Conditioning | |
| Backup Alarm |  |
| BICS System (Interlock) | |
| Cab Heater | |
| Operating Lights | |
| Suspension Seat | |
| Two Speed Travel | |
| Deluxe Instrumentation | |
| Engine Shutdown | |
| Hydraulic Bucket Positioning | |
| High Flow Option | |
| Auxiliary Hydraulics | |
| Bob-Tach Attachment System | |
| Power Bob-Tach | |
| ACS (Switchable Controls) | |
| Ride Control | |
| Horn | |
- Standard
- Optional
- Not Available
- No Data Available
click to enlarge
Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries.
