MENU
Lift big loads, yet still easily fit through narrow openings with the radius lift path Bobcat® S100 skid-steer loader.
Perform a variety of jobs with a 1,000 lb. lift capacity and enjoy greater work efficiency with a better balanced machine. It weighs just 4,000 lb. for easier trailering.
Boost top travel speed and reduce the time it takes to travel across a jobsite or between jobs.
Makes it possible for the loader and attachment to communicate.
Easily change attachments in less than a minute.
Control the drive, engine torque and tractive effort without an engine anti-stall system robbing you of power when you need it most.
Hydraulic pumps are matched to cylinder size and loader lift capacity, helping you get your work done faster.
Keeps your bucket level when raising lift arms, reducing spillage and allowing you to work more efficiently.
Reach maximum torque at a lower rpm to minimize stalling and save time and fuel.
Change non-hydraulic attachments by flipping a switch from the comfort of your cab.
Highly-efficient hydraulic pumps deliver more power that's matched to each movement.
Simply push the coupler inward to release the hydraulic oil through a return line back into the machine. The result is clean, quick attachment changes.
Ideal weight distribution provides the best turning and skidding performance. A distribution of 70 percent of weight in the rear and 30 percent in the front reduces fuel consumption and increases the life of the drive train and tires.
The engine, hydraulic pump, horsepower and cubic-inch displacement are precisely configured for each machine's specific operating capacity.
Belt-drive system allows the engine to run slower, enabling the machine to run quieter and longer.
Enjoy a smoother ride with cushioning of the loader circuit.
Power your phone, MP3 player or other accessories.
Machines with an enclosed cab feature large, swing-open doors that provide ample room for exit and entry.
Cool, clean air is drawn from above through the oil cooler and radiator, with small amounts of hot air from the engine compartment. Air is exhausted out two side vents, keeping hot air away from the operator.
A keel-shaped undercarriage gives the loader higher ground clearance and sheds debris to the outside much like the way a “V” shaped boat slices through water.
Tracks engine coolant temperature, engine oil pressure and hydraulic oil temperature and shuts down the machine's engine when there's a problem.
Axle bearings are automatically lubricated with chaincase oil and never require manual greasing.
The rugged chaincase is the only maintenance-free chaincase in the industry with exclusive fixed axle tubes, stronger axles, fully sealed bearings, plus the largest chains in the industry.
Chaincase requires no adjustments, ever.
Radiator and hydraulic oil cooler are well protected between the frame uprights, above the engine and out of danger.
On-board diagnostics efficiently troubleshoot problems in the field or prevent them before they occur. Downloadable machine performance history lets you identify potential problems and correct them.
Every pin and connecting point is on the same plane, which greatly reduces side deflection of the lift arm and increases lift arm life.
Compared to similar-sized loaders, our axles are the biggest in both size and weight. This means you can handle the most rugged conditions without worrying about possible downtime.
Crafted from one piece of 1/4 in. solid steel, the heavy-duty tailgate has no cooling holes, slots or other openings that could allow obstructions to damage the engine.
Enjoy the fastest and easiest maintenance in the industry. Perform daily maintenance like checking the engine fluids, filters, battery and air cleaner simply by opening the tailgate.
Non-routine maintenance items can be accessed easily, so you can spend time on maintenance or repair, not gaining access.
Get the world's only comprehensive training program when you purchase Bobcat equipment.
Boost top travel speed and reduce the time it takes to travel across a jobsite or between jobs. SJC is required for this option.
Achieve optimal suspension comfort with an air ride seat that smooths out bumps and increases comfort.
Provides communication between the attachment and loader.
Work in comfort with air movement, temperature control and greater flexibility in directing air.
Makes cold engine starts easier.
Puts auxiliary hydraulic controls at your fingertips for precise, low-fatigue operation. SJC is required for this option.
Keeps your bucket level when raising lift arms, reducing spillage and allowing you to work more efficiently.
Change non-hydraulic attachments by flipping a switch from the comfort of your cab.
Make it simple to connect and disconnect hydraulic lines under pressure. SJC is required for this option.
Simply push the coupler inward to release the hydraulic oil through a return line back into the machine. The result is clean, quick attachment changes.
Listen to music while you work with the optional radio, which includes an audio input to connect an MP3 player or other device.
Equip your loader to operate remotely in certain environments. The system is easy to install and easy to operate. SJC is required for this option.
Get better control and more comfort. SJC features speed and horsepower management, drive response, steering drift compensation, selectable control pattern and increased comfort.
Experience even quieter operation with the sound reduction package.
Adjusts easily to the operator's weight.
| Engine | S100 |
|---|---|
| Engine Cooling | Liquid |
| Emissions Tier (EPA) | Interim Tier 4 |
| Engine Fuel | Diesel |
| Horsepower | 35.5 HP |
| Turbocharged Engine | No |
| Performance | S100 |
|---|---|
| Rated Operating Capacity (SAE) | 1000 lbs |
| Tipping Load | 2002 lbs |
| Operating Weight | 4091 lbs |
| Travel Speed | 6.4 mph |
| Travel Speed (2-speed option) | 8.7 mph |
| Capacities | S100 |
|---|---|
| Fuel Tank | 11.9 gal |
| Hydraulic System | S100 |
|---|---|
| System Relief @ Quick Couplers | 3000 psi |
| Auxiliary Std Flow | 13.1 GPM |
| Auxiliary High Flow | N/A |
| Dimension | S100 |
|---|---|
| Length | 89.1 in |
| Length without Attachment | 89.1 in |
| Length with Standard Bucket | 110.2 in |
| Width | 45.9 in |
| Width (with bucket) | 50 in |
| Height | 73.9 in |
| Height with Operator Cab | 73.9 in |
| Height to Bucket Hinge Pin | 103.6 in |
| Reach @ Maximum Height | 15.4 in |
| Turning Radius | 68.2 in |
| Wheelbase | 32.2 in |
| Features | S100 |
|---|---|
| Joystick Control |  |
| Air Conditioning |  |
| Adjustable Seat |  |
| Backup Alarm | |
| BICS System (Interlock) | |
| Cab Enclosure | |
| Sound Option | |
| Cab Heater | |
| Operating Lights | |
| Parking Brake | |
| Radio | |
| Rear Window | |
| Top Window | |
| Lift-Arm Support | |
| Seat Belt | |
| Suspension Seat | |
| Two Speed Travel | |
| Deluxe Instrumentation | |
| Engine Shutdown | |
| Hydraulic Bucket Positioning | |
| High Flow Option | |
| Auxiliary Hydraulics | |
| Spark Arrestor Muffler | |
| Bob-Tach Attachment System | |
| Power Bob-Tach | |
| ACS (Switchable Controls) | |
| Ride Control | |
| Rear Hydraulics | |
| Horn | |
- Standard
- Optional
- Not Available
- No Data Available
click to enlarge
Swipe for more
S70ROC: 700 lb.
S100ROC: 1,000 lb.
S130ROC: 1,300 lb.
S510 M-SeriesROC: 1,650 lb.
S550 M-SeriesROC: 1,750 lb.
S530 M-SeriesROC: 1,850 lb.
S570 M-SeriesROC: 1,950 lb.
S590 M-SeriesROC: 2,100 lb.
S630 M-SeriesROC: 2,180 lb.
S650 M-SeriesROC: 2,690 lb.
S750 M-SeriesROC: 3,200 lb.
A770ROC: 3,325 lb.
S770 M-SeriesROC: 3,350 lb.
S850 M-SeriesROC: 3,950 lb.
Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries.
