MENU
The radius lift path Bobcat® S70 compact skid-steer loader is the perfect loader whenever the job is too big for a shovel or the space is too small for a larger machine.
This agile workhorse is only 6 ft. tall and 3 ft. wide — the ideal size for scooting through narrow doorways, corridors, aisles, alleys and gates and for working under low ceilings. With more than 20 Bobcat attachments to choose from, the S70 is a multi-attachment carrier that's ready to take on just about any job.
Provides communication between the attachment and loader.
Easily change attachments in less than a minute.
Control the drive, engine torque and tractive effort without an engine anti-stall system robbing you of power when you need it most.
Hydraulic pumps in Bobcat loaders are matched to cylinder size and loader lift capacity, helping you get your work done faster.
Keeps your bucket level when raising lift arms, reducing spillage and allowing you to work more efficiently.
Reach maximum torque at a lower rpm to minimize stalling and save time and fuel.
Highly-efficient hydraulic pumps deliver more power that's matched to each movement.
Ideal weight distribution provides the best turning and skidding performance. A distribution of 70 percent of weight in the rear and 30 percent in the front reduces fuel consumption and increases the life of the drive train and tires.
The engine, hydraulic pump, horsepower and cubic-inch displacement are precisely configured for each machine's specific operating capacity.
Belt-drive system allows the engine to run slower, enabling the machine to run quieter and longer.
Power your phone, MP3 player or other accessories.
Forget about losing or forgetting your keys. Start your machine with a programmable access code.
Adjusts easily to the operator's weight.
Tracks engine coolant temperature, engine oil pressure and hydraulic oil temperature and shuts down the loader's engine when there's a problem to prevent damage.
Axle bearings are automatically lubricated with chaincase oil and never require manual greasing.
The rugged chaincase is the only maintenance-free chaincase in the industry with exclusive fixed axle tubes, stronger axles, fully sealed bearings, plus the largest chains in the industry.
Chaincase requires no adjustments, ever.
Radiator and hydraulic oil cooler are protected between the frame uprights above the engine where they are less likely to be damaged.
Every pin and connecting point is on the same plane, which greatly reduces side deflection of the lift arm and increases lift arm life.
Get the world's only comprehensive training program when you purchase Bobcat equipment.
Enjoy the fastest and easiest maintenance in the industry. Perform daily maintenance like checking the engine fluids, filters, battery and air cleaner simply by opening the tailgate.
Non-routine maintenance items can be accessed easily, so you can spend time on maintenance or repair, not gaining access.
Provides communication between the attachment and loader.
Work in comfort with air movement, temperature control and greater flexibility in directing air.
Makes cold engine starts easier.
Keeps your bucket level when raising lift arms, reducing spillage and allowing you to work more efficiently.
Forget about losing or forgetting your keys. Start your machine with a programmable access code.
Tracks engine coolant temperature, engine oil pressure and hydraulic oil temperature and shuts down the machine's engine when there's a problem.
Adjusts easily to the operator's weight.
| Engine | S70 |
|---|---|
| Engine Cooling | Liquid |
| Emissions Tier (EPA) | Final Tier 4 |
| Engine Fuel | Diesel |
| Horsepower | 23.5 HP |
| Turbocharged Engine | No |
| Performance | S70 |
|---|---|
| Rated Operating Capacity (SAE) | 700 lbs |
| Tipping Load | 1512 lbs |
| Operating Weight | 2795 lbs |
| Travel Speed | 6.1 mph |
| Travel Speed (2-speed option) | N/A |
| Capacities | S70 |
|---|---|
| Fuel Tank | 6.5 gal |
| Hydraulic System | S70 |
|---|---|
| System Relief @ Quick Couplers | 3000 psi |
| Auxiliary Std Flow | 9.8 GPM |
| Auxiliary High Flow | N/A |
| Dimension | S70 |
|---|---|
| Length | 75.8 in |
| Length without Attachment | 75.8 in |
| Length with Standard Bucket | 97.3 in |
| Width | 35.5 in |
| Width (with bucket) | 36 in |
| Height | 71.4 in |
| Height with Operator Cab | 71.4 in |
| Height to Bucket Hinge Pin | 94.5 in |
| Reach @ Maximum Height | 15.8 in |
| Turning Radius | 58.7 in |
| Wheelbase | 28.4 in |
| Features | S70 |
|---|---|
| Joystick Control |  |
| Air Conditioning | |
| Adjustable Seat |  |
| Backup Alarm | |
| BICS System (Interlock) | |
| Cab Enclosure |  |
| Sound Option | |
| Cab Heater | |
| Operating Lights | |
| Parking Brake | |
| Radio | |
| Rear Window | |
| Top Window | |
| Lift-Arm Support | |
| Seat Belt | |
| Suspension Seat | |
| Two Speed Travel | |
| Deluxe Instrumentation | |
| Engine Shutdown | |
| Hydraulic Bucket Positioning | |
| High Flow Option | |
| Auxiliary Hydraulics | |
| Spark Arrestor Muffler | |
| Bob-Tach Attachment System | |
| Power Bob-Tach | |
| ACS (Switchable Controls) | |
| Ride Control | |
| Rear Hydraulics | |
| Horn | |
- Standard
- Optional
- Not Available
- No Data Available
click to enlarge
Swipe for more
S70ROC: 700 lb.
S100ROC: 1,000 lb.
S130ROC: 1,300 lb.
S510 M-SeriesROC: 1,650 lb.
S550 M-SeriesROC: 1,750 lb.
S530 M-SeriesROC: 1,850 lb.
S570 M-SeriesROC: 1,950 lb.
S590 M-SeriesROC: 2,100 lb.
S630 M-SeriesROC: 2,180 lb.
S650 M-SeriesROC: 2,690 lb.
S750 M-SeriesROC: 3,200 lb.
A770ROC: 3,325 lb.
S770 M-SeriesROC: 3,350 lb.
S850 M-SeriesROC: 3,950 lb.
Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries.
