Impress your customers with well-kept equipmentNow is the perfect time to look over your equipment with a fine tooth comb. Impress your customers by touching up any paint chips, replacing worn or torn door trim, and keeping the cab interior clean. By keeping your investment in good shape, you’ll impress your customers with well-kept equipment.
Our paint formulation provides excellent exterior durability, fast dry times, and great adhesion to difficult surfaces such as powder coatings.
Aerosol Enamel Spray Paint
Bobcat Aerosol Enamel Spray Paint
It's important to color match your paint for a well-maintained looking machine. So only use Bobcat Paint from your local Bobcat dealer to ensure the correct colors. Bobcat paint quarts are spray ready; additional thinning is usually not necessary. Aerosol cans feature a unique fan spray tip that delivers an oval shaped spray pattern. The fan spray gives better coverage and delivers a more uniform spray that allows the can to be held closer to the work surface for better control and overall spray reduction. Bobcat enamel paint coatings will dry dust free in 10-15 minutes, dry to handle in 30-45 minutes, and dry complete in about 24 hours. For more detailed information, see the direction panel on each container.
Aerosols should be stored in a cool dry place. When ready to apply, allow paint to warm to room temperature (70-75° F is an ideal application temperature). Parts to be painted should also be at a similar temperature for optimum performance.
Application at higher temperatures may result in “orange peel” due to rapid solvent evaporation. Spraying with a cool can and/or applying to a cool part could result in running and sagging due to slow evaporation of solvents from the paint film.
For best results apply 2 to 3 light passes of spray mist to the surface and allow approximately 30 seconds for some of the solvents to leave the film. This will allow you to apply a heavier finished coat that should resist runs and sags.
Additional coats should be applied only if needed and while the film is still tacky, but not wet. Again, this method will help to avoid runs and sags.
It is always advisable to develop your own spray technique on a scrap part first.
If recoating is required after the film has dried it is important to wait at least 72 hours with acrylic enamels. Lacquers can be recoated at any time.
Bobcat Touch-up Paint
- Bobcat Red – 6736645
- Bobcat Charcoal – 6736641
- Bobcat White – 6736642
- Bobcat Orange - 6736644
Bobcat Brilliance before and after photos
Bobcat Brilliance products will enhance the appearance of your used equipment without the expense of repainting and the hassle of replacing decals.
Unlike waxes, that just temporarily shine the surface, Bobcat Brilliance works by penetrating deep into the existing oxidized surface and actually interacts with the existing pigment to bring the original color back to a like new appearance.
The Process: Simply Clean/degrease and then apply Bobcat Brilliance Prep to remove oxidized paint surface and lingering waxes. Touch up scratches and chips with OEM paint. Next, cover with an even coat of Bobcat Brilliance Shine (no masking required). The result is impressive. In as little as an hour, you can transform your weathered piece of equipment into a valuable asset with a Brilliant showroom shine. All of this for a fraction of the time and money you would spend on repainting.
Features and Benefits:
Bobcat Brilliance product line
- Effective and simple way to extend the life of faded and oxidized surfaces
- Less costly to apply than paint
- Penetrates the surface, so there are no over-spray lines to buff out
- Quick drying time decreases the overall turn-around time of the application
- Surfaces maintain like-new appearance, proven to keep resale values higher
- No mixing is required, so there is less waste and no disposal requirements
- Available in convenient sizes and packages