Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Rotary Telehandlers / TR40.180 Rotary Telehandler

Specifications & Options


Close / Open all PDF version
Rated capacity
4,000 kg @ 500 mm Load Center
Max. lifting height (stabilisers fully extended)
17.6 m
Capacity at max. height (stabilisers fully extended)
3,000 kg
Turret Rotation
+/-200° (limited)
Max. speed
25 km/h
Pivoting stabilisers
Stabilization system
Ground pressure detection. Automatic levelling.
Weight (unladen)
14,400 kg
Make / Model
stage IIIA
Rated power (ISO 14396)
55 kW (75 hp) @ 2,200 rpm
Maximum torque
390 Nm @ 1,300 rpm
Number of cylinders
3.6 L
Pump type
Gear pump
Pump capacity
70 L/min
Relief valve pressure setting
270 bar
Control valve (boom and turret)
Electro-proportional with flow sharing
Hydrostatic with electronic regulation / 4 wheel drive
Main drive
Electronically controlled variable displacement pump. Variable displacement motor. 2-speed gear box
Standard tyres
445/65 R19,5
Towing force
74 kN
53 %
Axle type
Oil-immersed axles with planetary gears
Rear axle
Oscillating and steering with hydraulic locking
Front axle
Service brake
Hydraulically operated wet multi-disk brakes on each axle
Parking brake
Hydraulic with negative action
Steering modes
3 steering modes with semi-automatic wheel realignment. 2 wheel steering / 4 wheel steering / Crab-steer
External turning radius (with forks)
4.1 m
Fuel tank
175 L
Hydraulic reservoir
165 L
Operator noise level (LpA) (En 12053)
74 dB(A)
Level of acoustic power (LWA)
104 dB(A)
Whole body vibration (ISO 2631-1):
0.4 ms-2
Hand-arm vibration (ISO 5349–1)
0.4 ms-2
Standard compliance
EN 1459-2: slewing variable-reach trucks. EN 13000: hydraulic cranes. EN 280: mobile elevating work platforms. FOPS/ROPS cabin

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.