Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Telescopic Handlers / T35.105L Telescopic Handler

Specifications & Options

T35105L IIIB

Close / Open all PDF version
Lifting height
10,290 mm
Rated capacity
3,500 kg
Capacity (at max. height)
2,500 kg
Capacity (at max. reach)
600 kg
Max. reach
6,886 mm
Crowding force
7,800 daN
With forks and standard 405/70x20 tyres
With forks and optional 400/80x24 tyres
Weight (unladen)
7,420 kg
Standard tyres
SOLIDEAL 405/70-20 14PR
1st gear / low range
8.5 km/h
2nd gear / high range
30 km/h
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
Deutz TCD 3.6 L4
Rated power (ISO 14396:2002) at 2300 RPM
100 HP
Rated power (ISO 14396:2002) at 2300 RPM
74.4 kW
Maximum torque at 1400 RPM
410 Nm
Number of cylinders
3.6 L
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
255 bar
Lift time - no load
9.8 s
Lower time - no load
6 s
Telescope in time at max. reach - no load
7 s
Telescope in time at max. height - no load
7 s
Telescope out time at max. reach - no load
10.4 s
Telescope out time at max. height - no load
10.4 s
Engine braking
Parking and emergency brake
Negative brake with hydraulic command
Fuel tank
130 L
Hydraulic reservoir
71 L
Operator noise level (LpA) (EN 12053)
76 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
0.9 ms-2
Operator cab inside width
857 mm
Overall length (with forks)
6,276 mm
Overall length (fork frame)
5,071 mm
Overall length (without attachment)
4,936 mm
Overall length (Front tire to rear of machine)
4,192 mm
Overall height (with rotating beacon)
2,584 mm
Overall height
2,389 mm
Carriage rotation angle
143 °
Height to back of the machine
1,941 mm
Ground clearance
415 mm
Front axle to front carriage
1,422 mm
2,850 mm
Rear axle to back of machine
799 mm
Operator cab outside width
930 mm
Track width (front & rear)
1,862 mm
Width over standard tyres
2,264 mm
External turning radius (with forks spaced 1040 mm apart)
5,025 mm
External turning radius (with forks spaced 1360 mm apart)
5,116 mm
External turning radius (at tyres)
3,765 mm
Internal turning radius
1,245 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.