India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Telescopic Handlers / T35.140S Telescopic Handler

Specifications & Options

T35.140S 100 IIIA

Close / Open all PDF version
With forks and standard 400/80x24 tyres, on stabilisers
With forks and standard 400/80x24 tyres
With jib on 20 or 24 inch tyres, on stabilisers
With jib on 20 or 24 inch tyres
With extension jib on 20 or 24 inch tyres, on stabilisers
With extension jib on 20 or 24 inch tyres
  • Air conditioning
  • Boom stop
  • Custom colour
  • Fire extinguisher
  • Forward/Reverse control on Steering Wheel Lever (no longer on joystick)
  • Lockable fuel cap
  • Loudspeaker & radio ready
  • PVC Document holder
  • Protective grill for windshield (front and roof)
  • Rear Flat Mirror
  • Roof window wiper
  • Sun visor
  • Support for vehicle registration plate
  • Wheel wedge
  • Work lights on boom
  • Proportional engine fan with inverter
  • Remote control system with on-board charger
  • Basic tow hitch
  • Boom wiring harness and electric connectors
  • High comfort air suspension seat
  • Keyless ignition (start/stop with keypad)
  • Manitou carriage with manual attachment lock
  • Manitou carriage with hydraulic attachment lock (boom wiring harness mandatory)
  • Michelin tyres - set of 4 x 400/80-24'' 162A8 IND TL POWER CL
  • Pallet forks 1200mm length / Rigid frame / Forks included / Backrest included / For Quicktach tool carrier
  • Pallet forks 1200mm length / Floating / 1,44m carriage / Forks included / Backrest included / For Quicktach tool carrier
  • Quicktach carriage with hydraulic attachment lock (boom wiring harness mandatory)
  • Rotating tow hitch (including rear electric socket)
  • Standard engine ignition (with key) with additional keypad security
  • Pallet forks 1200mm length / Floating / 1,12m carriage / Forks included / Backrest included / For Manitach tool carrier
  • Pallet forks 1200mm length / Floating / 1,44m carriage / Forks included / Backrest included / For Manitach tool carrier
  • Pallet forks 1200mm length / Rigid frame / Forks included / Backrest included / For Manitach tool carrier
  • Cold start
  • Cyclonic air prefilter
Lifting height — on stabilisers
13,656 mm
Lifting height — on tyres
12,794 mm
Rated capacity
3,500 kg
Capacity (at max. height on stabilisers)
3,500 kg
Capacity (at max. height on tyres)
500 kg
Capacity (at max. reach on stabilisers)
1,000 kg
Capacity (at max. reach on tyres)
150 kg
Max. reach on tyres
9,449 mm
Weight (unladen)
9,200 kg
Standard tyres
SOLIDEAL 400/80-24 20PR
1st gear / low range
8.5 km/h
1st gear / high range
30 km/h
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
Perkins / 1104D-44TA
Fuel
Diesel
Cooling
Water
Rated power (ISO 14396)
100 HP
Rated power (ISO 14396)
74.5 kW
Maximum torque at 1400 RPM
410 Nm
Number of cylinders
4
Displacement
4.4 L
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
250 bar
Lift time - no load
14 s
Lower time - no load
8.5 s
Telescope in time at max. reach - no load
13 s
Telescope in time at max. height - no load
11.5 s
Telescope out time at max. reach - no load
20.5 s
Telescope out time at max. height - no load
20.5 s
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Fuel tank
145 L
Hydraulic reservoir
76 L
Level of acoustic power (LWA)
106 dB(A)
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
7,313 mm
(B)
Overall length (fork frame)
6,108 mm
(C)
Overall length (without attachment)
5,709 mm
(D)
Overall length (Front tire to rear of machine)
4,573 mm
(E)
Overall height (with rotating beacon)
2,673 mm
(F)
Overall height
2,536 mm
(G)
Carriage rotation angle
124 °
(I)
Height to back of the machine
1,956 mm
(J)
Ground clearance
509 mm
(L)
Front axle to front carriage
2,151 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
1,107 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,992 mm
(Q)
Width over standard tyres
2,418 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,640 mm
(S)
External turning radius (at tyres)
4,150 mm
(U)
Internal turning radius
1,519 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.