Middle East and Africa

North America

Russia & CIS

Southeast Asia

E26 Compact Excavator

Specifications & Options

E26

Close/Open all PDF version
Operating weight with cab and bucket (ISO 6016)
2,608 kg
Weight deduction with canopy
-118 kg
Ground pressure with rubber tracks
28.9 kPa
(A)
Bucket pivot angle
185 °
(B)
Maximum reach of working equipment
4,542 mm
(C)
Maximum reach at ground level
4,413 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,052 mm
(E)
Maximum blade height
385 mm
(F)
Maximum blade depth
420 mm
(G)
Maximum height of working equipment with dipperstick retracted
3,104 mm
(H)
Maximum bucket tooth height
4,006 mm
(I)
Maximum dump height
2,845 mm
(J)
Maximum depth of vertical wall which can be excavated
1,474 mm
(K)
Maximum digging depth
2,568 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
319 mm
(B)
Clearance, upper structure to ground line
539 mm
(C)
Ground line to top of engine cover
1,540 mm
(D)
Length of track on ground
1,543 mm
(E)
Machine centre line to blade
1,462 mm
(F)
Minimum radius in travel position
3,192 mm
(G)
Overall length of track assembly
1,965 mm
(H)
Overall length in travel position
4,174 mm
(I)
Track lug height
21 mm
(J)
Blade width
1,500 mm
(K)
Height
2,438 mm
(L)
Track width
250 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
580 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
705 mm
(O)
Minimum turning radius
1,755 mm
(P)
Swing clearance, rear
820 mm
(Q)
Working width at maximum right-hand rotation
1,741 mm
(R)
Working width at maximum left-hand rotation
1,616 mm
Make / model
Kubota / D1105-E4B-BCZ-1
Fuel
Diesel
Number of cylinders
3
Displacement
1,123 cm3
Maximum power @ 2400 rpm (ISO 14396)
15.3 kW
Maximum torque (SAE)
71.2 Nm
Digging force, dipperstick (ISO 6015)
15,690 N
Digging force, bucket (ISO 6015)
23,720 N
Drawbar pull
29,080 N
Travel speed, low range
2.5 km/h
Travel speed, high range
4.3 km/h
Pump type
Dual outlet variable displacement piston pump with gear pumps
Total hydraulic capacity
87 L/min
Auxiliary flow
50 L/min
Auxiliary relief
180 bar
Boom swing, left
60 °
Boom swing, right
60 °
Slew rate
9.3 RPM
Cooling system
4.3 L
Engine lubrication plus oil filter
3.6 L
Fuel reservoir
34.4 L
Hydraulic reservoir
10.2 L
Hydraulic system
23 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.1 ms-2
Hand-arm vibration (ISO 5349–1)
0.5 ms-2
  • 1500 mm dozer blade
  • 250 mm rubber track
  • Adjustable double acting auxiliary hydraulic (AUX1) with Quick Couplers
  • Battery disconnect
  • Blade float feature
  • Control console locks
  • Cupholder
  • Engine/hydraulic monitor with shutdown
  • Foldable and ergonomic pedals
  • Full fuel warning alarm
  • Grease gun holder
  • Horn
  • Proportional fingertip auxiliary and boom swing offset hydraulic control
  • Retractable seat belt
  • Seat with high back
  • TOPS/ROPS/FOPS canopy * (1)
  • Two-speed travel with Auto shift
  • Upper structure four-point tie down
  • Work light (boom)
  • Water separator
  • Warranty: 12 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • 1st AUX hydraulic on arm
  • 2nd AUX hydraulics
  • AM/FM stereo radio
  • Additional lights (2+1)
  • Beacon
  • Bobcat hydr. pin grabber
  • Object handling device (safety valves + overload warning device + lifteye)
  • Bucket diverter valves (AUX3) kit
  • Case drain line
  • Dlx textile suspension seat
  • Direct-to-tank-AUX1 line
  • Fire extinguisher
  • Hydr. coupler lines (AUX5)
  • Keyless ignition
  • Klac coupler
  • Left and right mirror
  • MS03/HS03 coupler or tilt coupler with lifteye
  • MS03/HS03 coupler with lifteye
  • Suspension seat
  • TOPS/ROPS/FOPS cab with heater
  • Travel motion alarm