Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

E45 Compact Excavator

Specifications & Options


Close/Open all PDF version
Operating weight
4,634 kg
Additional weight for cab with HVAC
19 kg
Additional weight for long dipperstick
216 kg
Additional weight for steel tracks
131 kg
Ground pressure with rubber tracks
25.4 kPa
Bucket pivot angle
185 °
Maximum reach of working equipment
5,802 mm
Maximum reach of working equipment, long dipperstick
6,083 mm
Maximum reach at ground level
5,670 mm
Maximum reach at ground level, long dipperstick
5,964 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,491 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,573 mm
Maximum blade height
384 mm
Maximum blade depth
465 mm
Maximum height of working equipment with dipperstick retracted
4,095 mm
Maximum bucket tooth height
5,345 mm
Maximum bucket tooth height, long dipperstick
5,527 mm
Maximum dump height
3,697 mm
Maximum dump height, long dipperstick
3,879 mm
Maximum depth of vertical wall which can be excavated
2,531 mm
Maximum depth of vertical wall which can be excavated, long dipperstick
2,820 mm
Maximum digging depth
3,300 mm
Maximum digging depth, long dipperstick
3,600 mm
(* Dentoes values which long dipperstick installed)
Blade height
446 mm
Clearance, upper structure to ground line
640 mm
Ground line to top of engine cover
1,575 mm
Length of track on ground
1,998 mm
Machine centre line to blade
1,797 mm
Minimum radius in travel position
4,092 mm
Overall length of track assembly
3,058 mm
Overall length in travel position
5,353 mm
Overall length in travel position, long dipperstick
5,379 mm
Track lug height
25 mm
Blade width
1,960 mm
2,541 mm
Track width
400 mm
Machine centre line to working equipment centre line, left-hand rotation
586 mm
Machine centre line to working equipment centre line, right-hand rotation
872 mm
Minimum turning radius
3,973 mm
Swing clearance, rear
980 mm
Swing clearance, rear (zero tail swing), long dipperstick
997 mm
Working width at maximum right-hand rotation
2,074 mm
Working width at maximum left-hand rotation
1,874 mm
Make / model
Kubota / V2403-M-DI-E3B-BC-5
Number of cylinders
2,433 cm3
Maximum NET power (ISO 9249)
30.2 kW
Maximum NET torque (ISO 9249)
152.7 Nm
Pump type
Single outlet variable displacement, load sensing torque limited pump
Piston pump capacity
99.1 L/min
Auxiliary flow
75.7 L/min
Auxiliary relief
210.0 bar
Digging force, dipperstick (ISO 6015)
25,700 N
Digging force, long dipperstick (ISO 6015)
23,700 N
Digging force, bucket (ISO 6015)
35,800 N
Drawbar pull
40,447 N
Travel speed, low range
2.4 km/h
Travel speed, high range
4.2 km/h
Boom swing, left
75 °
Boom swing, right
50 °
Slew rate
Cooling system
8.3 L
Engine lubrication plus oil filter
7.1 L
Fuel reservoir
79.9 L
Hydraulic reservoir
15.1 L
Hydraulic system
54.9 L
Noise level LpA(EU Directive 2006/42/EC)
79 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
95 dB(A)
Whole body vibration (ISO 2631–1)
0.1 ms-2
Hand-arm vibration (ISO 5349–1)
0.3 ms-2
  • 1960 mm dozer blade
  • 400 mm rubber track
  • Auto idle
  • Auto shift travel
  • Auxiliary hydraulics with Quick Couplers
  • Selectable auxiliary hydraulic flow
  • Blade float feature
  • Clamp ready
  • Control console locks
  • Cupholder
  • Engine/hydraulic monitor with shutdown
  • Fingertip auxiliary hydraulic control
  • Full fuel warning alarm
  • Horn
  • Hydraulic joystick controls
  • Machine IQ (telematic)
  • Retractable seat belt
  • Suspension seat with high back
  • TOPS/ROPS* canopy (1)
  • Two-speed travel
  • Work lights (boom and upperstructure)
  • Warranty: 24 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117.

  • Air conditioning
  • Long dipperstick
  • 2nd Auxiliary hydraulics
  • Dlx textile suspension seat
  • Boom safety valve with overload warning
  • Boom & arm safety valves with overload warning
  • AM/FM stereo radio
  • FOGS kit (Overhead guard)
  • Lifting chain kit
  • Travel motion alarm
  • Steel tracks
  • Beacon kit
  • Left and right mirror
  • Additional work light kit
  • Rubber bolt-on pads for steel tracks
  • Special applications kit
  • Hydraulic coupler lines

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.