E55 Compact Excavator
Specifications & Options
E55
Close/Open all PDF version
Operating weight
5,501 kg
Additional weight for long dipperstick
115 kg
Ground pressure with rubber tracks
33.5 kPa
(A)
Bucket pivot angle
185 °
(B)
Maximum reach of working equipment
6,191 mm
(C)
Maximum reach at ground level
6,083 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,389 mm
(E)
Maximum blade height
385 mm
(F)
Maximum blade depth
465 mm
(G)
Maximum height of working equipment with dipperstick retracted
4,269 mm
(H)
Maximum bucket tooth height
5,850 mm
(I)
Maximum dump height
4,179 mm
(J)
Maximum depth of vertical wall which can be excavated
3,199 mm
(K)
Maximum digging depth
3,923 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
446 mm
(B)
Clearance, upper structure to ground line
618 mm
(C)
Ground line to top of engine cover
1,575 mm
(D)
Length of track on ground
1,998 mm
(E)
Machine centre line to blade
1,796 mm
(F)
Minimum radius in travel position
3,872 mm
(G)
Overall length of track assembly
3,057 mm
(H)
Overall length in travel position
5,194 mm
(I)
Track lug height
25 mm
(J)
Blade width
1,960 mm
(K)
Height
2,541 mm
(L)
Track width
400 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
394 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
631 mm
(O)
Minimum turning radius
2,041 mm
(P)
Swing clearance, rear
1,322 mm
(Q)
Working width at maximum right-hand rotation
2,290 mm
(R)
Working width at maximum left-hand rotation
1,949 mm
Make / model
Kubota / V2403-M-D1-TE3B-BC-4
Fuel
Diesel
Number of cylinders
4
Displacement
2,433 cm3
Maximum NET power (ISO 9249)
35.4 kW
Maximum NET torque (ISO 9249)
179.5 Nm
Digging force, dipperstick (ISO 6015)
26,100 N
Digging force, bucket (ISO 6015)
42,000 N
Drawbar pull
52,343 N
Travel speed, low range
3.1 km/h
Travel speed, high range
5 km/h
Pump type
Single outlet variable displacement, load sensing torque limited pump
Pump capacity
138.5 L/min
Auxiliary flow
75.7 L/min
Auxiliary relief
210.0 bar
Boom swing, left
75 °
Boom swing, right
50 °
Slew rate
9 RPM
Cooling system
8.3 L
Engine lubrication plus oil filter
7.1 L
Fuel reservoir
79.9 L
Hydraulic reservoir
15.1 L
Hydraulic system
54.9 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
97 dB(A)
- 1960 mm dozer blade
- 400 mm rubber track
- Auto idle
- Auto shift travel
- Auxiliary hydraulics with Quick Couplers
- Blade float feature
- Cab light
- Clamp ready
- Control console locks
- Cupholder
- Engine/hydraulic monitor with shutdown
- Machine IQ (telematic)
- Warranty: 12 months, 2000 hours (whichever occurs first)
- Rubber tracks
- 2nd Auxiliary hydraulics
- Third auxiliary hydraulic line (Clamshell Piping)
- Long dipperstick
- Hydraulic coupler lines
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.