Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

T110 Compact Tracked Loader

Specifications & Options


Close/Open all PDF version
Rated operating capacity (ISO 14397–1)
505 kg
Tipping load (ISO 14397-1)
1,443 kg
Pump capacity
52.2 L/min
System relief at quick couplers
20.7 MPa
Travel speed
8.4 km/h
Make / Model
Kubota / V2403-M-DI-E3
Power at 2200 RPM (SAE J1995)
31.2 kW
Power at 2200 RPM (SAE J1995)
31.2 kW
Torque at 1400 RPM (SAE JI 995 Gross)
155.9 Nm
Number of cylinders
2,434 cm3
Fuel tank
45.2 L
Operating weight
2,379 kg
Shipping weight
2,100 kg
Operating height
3,474 mm
Height with operator cab
1,882 mm
Angle of departure
37 °
Ground clearance
201 mm
Ground contact length
1,299 mm
Length without attachment
2,262 mm
Length with standard bucket
2,972 mm
Rollback at ground position
26 °
Dump height with standard bucket
1,999 mm
Height to bucket hinge pin
2,634 mm
Dump reach at maximum height
579 mm
Dump angle at maximum height
41 °
Rollback fully raised at maximum height
95 °
Width with standard bucket
1,270 mm
Turning radius with standard bucket
1,852 mm
Track gauge, 250 mm tracks
949 mm
Width over tracks, 250 mm tracks
1,199 mm
Vehicle steering
Direction and speed controlled by two hand levers
Loader hydraulics tilt and lift
Two foot pedals.
Front auxiliary (standard)
Lateral movement of the right-hand steering lever
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
  • High-back cushion suspension seat
  • Automatically activated glow plugs
  • Auxiliary hydraulics: variable flow/detent on max flow
  • Bob-Tach™ frame
  • Bobcat Interlock Control System (BICS)
  • Deluxe operator cab* - Includes interior cab foam, side, top and rear windows, Deluxe wire harness, dome light, and electrical power port. Front door w/ windshield wiper. (1)
  • Engine/hydraulics system shutdown
  • Hydraulic bucket positioning (including ON/OFF switch)
  • Instrumentation
  • Lift arm support
  • Operating lights, front and rear
  • Parking brake
  • Seat belt
  • Seat bar
  • Spark arrestor muffler
  • CE certification
  • Warranty: 12 months or 2000 hours, whichever occurs first

(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I

  • Factory Options
    • Power Bob-Tach™
    • Cab enclosure with heating
    • Deluxe instrument panel
  • Dealer Installed Options
    • Front door kit
    • Special applications kit
    • Fuel cap locking kit
    • Fresh air heater kit
    • Plumbing kit for fresh air heater
    • Back up alarm kit
    • FOPS kit **
    • Single-point lift kit
    • Replacement operator cab structure
    • Power Bob-Tach™ kit
    • Dual function attachment control kit
    • 14 pin attachment kit
    • Rear window kit
    • Side window kit
    • Top window kit (lexan)
    • Lexan door kit
    • Catalytic purifier kit
    • Hydraulic bucket positioning kit
    • Fire extinguisher kit
    • Rear window wiper kit
    • Warning lights: rotating beacon, strobe light, 4–way flasher
    • Seat belt kit
    • Third gas spring kit (for enclosed cabs)
    • Tailgate lock kit
    • Suspension seat
  • Angle Brooms
  • Auger Accessories
  • Bale Forks
  • Breaker Accessories
  • Breakers
  • Brush Saws
  • Construction / Industrial Buckets
  • Diggers
  • Dumping Hoppers
  • Grapples, Industrial
  • Landplanes
  • Low Profile Buckets
  • Mowers
  • Pallet Fork Accessories
  • Root Grapples
  • Scarifiers
  • Scrapers
  • Skeleton Buckets
  • Snow Blades
  • Soil Conditioners
  • Sweepers
  • Tillers
  • Utility Forks
Operator LpA (98/37 & 474-1)
85 dB(A)
Noise level LWA (EU Directive 2000/14/EC)
101 dB(A)
Whole body vibration (ISO 2631–1)
0.6 ms-2
Hand-arm vibration (ISO 5349–1)
4.6 ms-2

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.