Middle East and Africa

North America

Russia & CIS

Southeast Asia

Loaders / S100 Skid-Steer Loader

Specifications & Options


Close/Open all PDF version
Rated operating capacity (ISO 14397-1)
457 kg
Tipping load (ISO 14397-1)
915 kg
Pump capacity
50 L/min
System relief at quick couplers
20.7 MPa
Max. travel speed
10.4 km/h
Make / Model
Kubota / V1505-E2B-BCZ
Maximum power at 3000 RPM (SAE J1995)
25 kW
Torque at 1700 RPM (SAE J1349)
93 Nm
Number of cylinders
1,498 cm3
Fuel tank
45 L
Operating weight (with std tyres, 48 inch bucket)
1,860 kg
Shipping weight (with std tyres, without bucket)
1,693 kg
Operating height
3,306 mm
Height with operator cab
1,878 mm
Angle of departure
25 °
Ground clearance
167 mm
818 mm
Length without attachment
2,262 mm
Length with standard bucket
2,800 mm
Rollback at ground position
26 °
Dump height with standard bucket
2,084 mm
Height to bucket hinge pin
2,633 mm
Dump reach at maximum height
412 mm
Dump angle at maximum height
43 °
Rollback fully raised at maximum height
95 °
Width over standard bucket
1,270 mm
Turning radius with standard bucket
1,731 mm
Track, standard tyres
967 mm
Width over standard tyres
1,167 mm
Vehicle steering
Direction and speed controlled by two hand levers
Loader hydraulics tilt and lift
Separate foot pedals
Front auxiliary (standard)
Lateral movement of right-hand steering lever
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
  • Automatically activated glow plugs
  • Cushion suspension seat
  • Auxiliary hydraulics: variable flow/maximum flow
  • Bob-Tach™ frame
  • Engine/hydraulics system shutdown
  • Bobcat Interlock Control System (BICS)
  • Operating lights, front and rear
  • Instrumentation
  • Lift arm support
  • Operator cab Deluxe (1)
  • Parking brake
  • Seat belt
  • Seat bar
  • Spark arrestor muffler
  • 27 x 8.50-15, 6–ply, Bobcat heavy duty tyres
  • Warranty: 12 months or 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I. Cab Deluxe includes Interior cab foam, top and rear windows, deluxe wire harness, domelight and electrical power port.

  • Factory Options
    • Deluxe instrument panel
    • Cab enclosure with heating
    • Power Bob-Tach™
    • Selectable Joystick Controls (SJC)
    • Hydraulic bucket positioning (including ON/OFF switch)
    • Counterweights
    • Back-up alarm
    • Beacon
  • Dealer Installed Options
    • Cab enclosure kit
    • Lexan rear window kit
    • Side windows kit
    • Top window kit Lexan
    • Front door kit
    • Lexan door kit
    • Special applications front door kit
    • Catalytic purifier kit
    • Counterweight kit
    • Single-point lift kit
    • Hydraulic bucket positioning kit
    • Power Bob-Tach™ kit
    • Back up alarm kit
    • Fire extinguisher kit
    • Fresh air heater kit
    • Plumbing kit for fresh air heater
    • Rear window wiper kit
    • Warning lights: rotating beacon, strobe light
    • Seat belt kit
    • Third gas spring kit (for heated cab)
    • Additional gas spring kit (for tipping the cab)
    • Tailgate lock kit
    • Fuel cap locking kit
    • Heater coil kit
    • Translation S100 kit (decals)
    • FOPS kit
  • Angle Brooms
  • Augers
  • Bale Forks
  • Breakers
  • Brush Saws
  • Construction / Industrial Buckets
  • Dirt Buckets
  • Dumping Hoppers
  • General Purpose (GP) Bucket
  • Grapples, Industrial
  • Landplanes
  • Low Profile Buckets
  • Mowers
  • Pallet Fork Accessories
  • Pallet Forks, Standard
  • Root Grapples
  • Scrapers
  • Skeleton Buckets
  • Snow Blades
  • Snow Blowers
  • Soil Conditioners
  • Spare Wheels
  • Sweepers
  • Tillers
  • Tree Forks
  • Trenchers
  • Utility Forks
  • Utility Frames
Noise level LpA(EU Directive 2006/42/EC)
86.5 dB(A)
Operator LpA uncertainty
2.5 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
101 dB(A)
Whole body vibration (ISO 2631–1) High speed
0.6 ms-2
Whole body vibration uncertainty
0.2 ms-2
Hand-arm vibration (ISO 5349–1)
1.9 ms-2

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.