India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Telescopic Handlers / T35-105L Telescopic Handler

75HP Specifications

T35.105L 75 V

Close/Open all PDF version
With forks and standard 405/70x20 tyres
With forks and optional 400/80x24 tyres
With jib on 20 or 24 inch tyres
With extension jib on 20 or 24 inch tyres
  • Air conditioning
  • Boom stop
  • Custom colour
  • Fire extinguisher
  • Forward/Reverse control on Steering Wheel Lever (no longer on joystick)
  • Lockable fuel cap
  • Loudspeaker & radio ready
  • PVC Document holder
  • Pintle tow hitch (including rear electric socket)
  • Protective grill for windshield (front and roof)
  • Rear Flat Mirror
  • Roof window wiper
  • Sun visor
  • Support for vehicle registration plate
  • Wheel wedge
  • Work lights on boom
  • Remote control system with on-board charger
  • Basic option tyres - set of 4 x 400/80-24"
  • Basic tow hitch
  • Boom wiring harness and electric connectors
  • Dunlop tyres - set of 4 x 405/70-20" SPT9 MPT (SEMI INDUSTRIAL)
  • Dunlop tyres - set of 4 x 405/70-24" SPT9 MPT (SEMI INDUSTRIAL)
  • High comfort air suspension seat
  • Keyless ignition (start/stop with keypad)
  • Michelin tyres - set of 4 x 400/80-24'' 162A8 IND TL POWER CL
  • Pallet forks 1200mm length / Floating / 1,44m carriage / Forks included / Backrest included / For Quicktach tool carrier
  • Pallet forks 1200mm length / Rigid frame / Forks included / Backrest included / For Quicktach tool carrier
  • Fan invertor with manual and auto modes
  • Quicktach carriage with hydraulic attachment lock (boom wiring harness mandatory)
  • Rotating tow hitch (including rear electric socket)
  • Standard engine ignition (with key) with additional keypad security
Lifting height
10,290 mm
Lifting height — on tyres
10,290 mm
Rated capacity
3,500 kg
Capacity (at max. height on tyres)
2,500 kg
Capacity (at max. reach on tyres)
600 kg
Max. reach on tyres
6,886 mm
Weight (unladen)
7,270 kg
Standard tyres
SOLIDEAL 405/70-20 14PR
1st gear / low range
4.2 km/h
1st gear / high range
20.5 km/h
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
Bobcat D34
Fuel
Diesel
Cooling
Coolant
Rated power (ISO 14396)
75 HP
Rated power (ISO 14396)
55.3 kW
Maximum torque at 1400 RPM
360 Nm
Number of cylinders
4
Displacement
3.4 L
Pump type
Gear pump with LS valve
Pump capacity
80 L/min
Relief valve pressure setting
250 bar
Lift time - no load
12.5 s
Lower time - no load
7 s
Telescope in time at max. reach - no load
7 s
Telescope in time at max. height - no load
7 s
Telescope out time at max. reach - no load
13 s
Telescope out time at max. height - no load
13 s
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Fuel tank
130 L
Hydraulic reservoir
71 L
Operator noise level (LpA) (EN 12053)
75 dB(A)
Operator noise level (LpA) (EN 12053) uncertainty
4 dB(A)
Level of acoustic power (LWA)
104 dB(A)
Whole body vibration (EN 13059)
1.3 ms-2
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
6,276 mm
(B)
Overall length (fork frame)
5,071 mm
(C)
Overall length (without attachment)
4,936 mm
(D)
Overall length (Front tire to rear of machine)
4,192 mm
(E)
Overall height (with rotating beacon)
2,584 mm
(F)
Overall height
2,445 mm
(G)
Carriage rotation angle
143 °
(I)
Height to back of the machine
1,941 mm
(J)
Ground clearance
415 mm
(L)
Front axle to front carriage
1,422 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
799 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,862 mm
(Q)
Width over standard tyres
2,264 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,025 mm
(R)
External turning radius (with forks spaced 1360 mm apart)
5,116 mm
(S)
External turning radius (at tyres)
3,765 mm
(U)
Internal turning radius
1,245 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.