India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Telescopic Handlers / T40-180 SLP Telescopic Handler

100HP Specifications

T40.180SLP 100 IV

Close/Open all PDF version
With forks and standard 400/80x24 tyres, on stabilisers
With forks and standard 400/80x24 tyres
With jib on 20 or 24 inch tyres, on stabilisers
With jib on 20 or 24 inch tyres
With extension jib on 20 or 24 inch tyres, on stabilisers
With extension jib on 20 or 24 inch tyres
With 1m, 220 kg manplatform on 24 inch tyres, on stabilisers
With 2-4 m, 300 kg manplatform on 24 inch tyres, on stabilisers
With 2-4 m, 800 kg manplatform on 24 inch tyres, on stabilisers
  • Air conditioning
  • Boom stop
  • Custom colour
  • Fire extinguisher
  • Forward/Reverse control on Steering Wheel Lever (no longer on joystick)
  • Lockable fuel cap
  • Loudspeaker & radio ready
  • PVC Document holder
  • Pintle tow hitch (including rear electric socket)
  • Protective grill for windshield (front and roof)
  • Rear Flat Mirror
  • Roof window wiper
  • Sun visor
  • Support for vehicle registration plate
  • Wheel wedge
  • Work lights on boom
  • Proportional engine fan with inverter
  • Remote control system with on-board charger
  • Basic tow hitch
  • Boom wiring harness and electric connectors
  • High comfort air suspension seat
  • Keyless ignition (start/stop with keypad)
  • Michelin tyres - set of 4 x 400/80-24'' 162A8 IND TL POWER CL
  • Pallet forks 1200mm length / Rigid frame / Forks included / Backrest included / For Quicktach tool carrier
  • Pallet forks 1200mm length / Floating / 1,44m carriage / Forks included / Backrest included / For Quicktach tool carrier
  • Quicktach carriage with hydraulic attachment lock (boom wiring harness mandatory)
  • Rotating tow hitch (including rear electric socket)
  • Standard engine ignition (with key) with additional keypad security
  • Manitou carriage with hydraulic attachment lock (boom wiring harness mandatory)
  • Manitou carriage with manual attachment lock
  • Pallet forks 1200mm length / Floating / 1,12m carriage / Forks included / Backrest included / For Manitach tool carrier
  • Pallet forks 1200mm length / Floating / 1,44m carriage / Forks included / Backrest included / For Manitach tool carrier
  • Pallet forks 1200mm length / Rigid frame / Forks included / Backrest included / For Manitach tool carrier
  • Man platform ready (remote control system, boom wiring harness and boom stop mandatory)
  • Protective zinc coat
  • Winch ready (boom wiring harness mandatory)
Lifting height — on stabilisers
17,466 mm
Lifting height — on tyres
16,200 mm
Rated capacity
4,000 kg
Capacity (at max. height on stabilisers)
2,500 kg
Capacity (at max. height on tyres)
1,000 kg
Capacity (at max. reach on stabilisers)
500 kg
Max. reach on tyres
12,800 mm
Weight (unladen)
10,650 kg
Standard tyres
DUNLOP 400/80-24 156B T37
1st gear / low range
8.5 km/h
1st gear / high range
30 km/h
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
Bobcat D34
Fuel
Diesel
Cooling
Coolant
Rated power (ISO 14396:2002) at 2400 RPM
100 HP
Rated power (ISO 14396:2002) at 2400 RPM
74.5 kW
Maximum torque at 1400 RPM
430 Nm
Number of cylinders
4
Displacement
3.4 L
 
 
*Stage IIIB Bobcat D34 also available in 55kW/75HP version (without SCR/Ad-Blue after-treatment)
 
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
250 bar
Lift time - no load
14 s
Lower time - no load
8.5 s
Telescope in time at max. reach - no load
20.5 s
Telescope in time at max. height - no load
18 s
Telescope out time at max. reach - no load
31.5 s
Telescope out time at max. height - no load
31.5 s
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Fuel tank
145 L
Hydraulic reservoir
76 L
Operator noise level (LpA) (EN 12053)
78 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
1.2 ms-2
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
7,425 mm
(B)
Overall length (fork frame)
6,220 mm
(C)
Overall length (without attachment)
5,821 mm
(D)
Overall length (Front tire to rear of machine)
4,573 mm
(E)
Overall height (with rotating beacon)
2,673 mm
(F)
Overall height
2,536 mm
(G)
Carriage rotation angle
124 °
(I)
Height to back of the machine
1,956 mm
(J)
Ground clearance
509 mm
(L)
Front axle to front carriage
2,263 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
1,107 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,992 mm
(Q)
Width over standard tyres
2,418 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,840 mm
(S)
External turning radius (at tyres)
4,150 mm
(U)
Internal turning radius
1,519 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.