Middle East and Africa

North America

Russia & CIS

Southeast Asia

E19 Compact Excavator

Specifications & Options

E19

Close/Open all PDF version
Operating weight with cab and bucket (ISO 6016)
1,885 kg
Transport mass (no attachment)
1,768 kg
Weight reduction with canopy
-96 kg
Additional weight for long dipperstick
6 kg
Additional weight for counterweight
50 kg
Ground pressure with rubber tracks
32.4 kPa
(A)
Bucket pivot angle
196 °
(B)
Maximum reach of working equipment
4,084 mm
(B*)
Maximum reach of working equipment, long dipperstick
4,257 mm
(C)
Maximum reach at ground level
4,039 mm
(C*)
Maximum reach at ground level, long dipperstick
4,214 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
1,542 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
1,561 mm
(E)
Maximum blade height
220 mm
(F)
Maximum blade depth
204 mm
(G)
Maximum height of working equipment with dipperstick retracted
2,564 mm
(H)
Maximum bucket tooth height
3,573 mm
(H*)
Maximum bucket tooth height, long dipperstick
3,701 mm
(I)
Maximum dump height
2,566 mm
(I*)
Maximum dump height, long dipperstick
2,693 mm
(J)
Maximum depth of vertical wall which can be excavated
1,948 mm
(J*)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,115 mm
(K)
Maximum digging depth
2,385 mm
(K*)
Maximum digging depth, long dipperstick
2,565 mm
()
(* Dentoes values which long dipperstick installed)
Thu May 24 11:10:19 CEST 2018
(A)
Blade height
235 mm
(B)
Clearance, upper structure to ground line
419 mm
(C)
Ground line to top of engine cover
1,340 mm
(D)
Length of track on ground
1,114 mm
(E)
Machine centre line to blade
1,045 mm
(F)
Minimum radius in travel position
2,832 mm
(G)
Overall length of track assembly
1,476 mm
(H)
Overall length in travel position
3,831 mm
(H*)
Overall length in travel position, long dipperstick
3,812 mm
(I)
Track lug height
25 mm
(J)
Blade width
980 mm
(J*)
Blade width (extensions extended)
1,360 mm
(K)
Height
2,299 mm
(L)
Track width
230 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
433 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
589 mm
(O)
Minimum turning radius
1,154 mm
(P)
Swing clearance, rear
1,009 mm
(Q)
Working width at maximum right-hand rotation
1,801 mm
(R)
Working width at maximum left-hand rotation
1,645 mm
Make / model
Kubota / D722-E4B-BCZ-7
Fuel
Diesel
Number of cylinders
3
Displacement
719 cm3
Maximum power @ 2500 rpm (ISO 14396)
10.2 kW
Maximum torque (SAE)
43.5 Nm
Digging force, dipperstick (ISO 6015)
10,371 N
Digging force, long dipperstick (ISO 6015)
9,279 N
Digging force, bucket (ISO 6015)
20,835 N
Drawbar pull
19,380 N
Travel speed, low range
2.5 km/h
Travel speed, high range
4 km/h
Pump type
Dual piston pump with gear pump
Total hydraulic capacity
41.3 L/min
Piston pump capacity
30 L/min
Auxiliary flow
30 L/min
Auxiliary relief
180.0 bar
Boom swing, left
80 °
Boom swing, right
60 °
Slew rate
8.4 RPM
Cooling system
3.3 L
Engine lubrication plus oil filter
3.3 L
Fuel reservoir
19 L
Hydraulic reservoir
14.3 L
Hydraulic system
19 L
Noise level LpA(EU Directive 2006/42/EC)
79 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.1 ms-2
Hand-arm vibration (ISO 5349–1)
0.3 ms-2
  • 980 mm dozer blade with two 190 mm blade extensions
  • 230 mm rubber track
  • Adjustable double acting auxiliary hydraulic (AUX1) with Quick Couplers
  • Battery disconnect
  • TOPS/ROPS/FOPS canopy (1)
  • Exposed counterweight with 4 mm steel tailgate
  • Control console locks
  • Horn
  • Hydraulic joystick controls
  • Retractable seat belt
  • Two-speed travel
  • Full fuel warning alarm
  • Cupholders
  • Foldable and ergonomic pedals
  • Hydraulically retractable undercarriage from 1360 mm to 980 mm
  • Upper structure four point tie down
  • Engine monitor with auto shutdown
  • Hydraulic and travel control lockout
  • Water separator
  • Work light (boom)
  • Warranty: 12 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • 1st AUX hydraulic on arm
  • 2nd AUX hydraulics
  • Additional lights (2+1)
  • AM/FM MP3 stereo radio
  • Beacon
  • Comfort package (Superior seat for canopy or cloth suspension seat for cab, Autospeed shift, Aux and Off-set pilot control)
  • Demolition package (boom, arm, bucket cylinder covers & HD travel hoses guard)
  • Fire extinguisher
  • Hydraulic clamp
  • Keyless start
  • Klac and MS03 couplers
  • LED lights set
  • Left and right mirror
  • Long dipperstick with clamp eyes
  • Long dozer blade
  • Object handling device (safety valves + overload warning device + lifteye)
  • Performance package (HD travel motors, add. counterweight)
  • Special applications kit
  • Travel motion alarm
  • TOPS/ROPS/FOPS cab with heater

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.