India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

TR60.300 Rotary Telehandler

Specifications & Options

TR60-300

Close/Open all PDF version
Rated capacity
6,000 kg @ 600 mm Load Center
Max. lifting height (stabilisers fully extended)
29.8 m
Capacity at max. height (stabilisers fully extended)
2,500 kg
Turret Rotation
360° (Continous)
Max. speed
40 km/h
Type
Telescopic scissors
Stabilization system
Ground pressure detection. Automatic levelling. Lifting capacity adjusted in proportion to stabiliser extension
Weight (unladen)
21,800 kg
Make / Model
Volvo TAD 582 VE
Compliancy
Stage V
Rated power (ISO 14396)
160 kW (218 hp) @ 2,300 rpm
Maximum torque
925 Nm @ 1,380 rpm
Number of cylinders
4.0
Displacement
5.1 L
Pump type
Load Sensing pump
Pump capacity
124 L/min
Relief valve pressure setting
350 bar
Control valve (boom and turret)
Electro-proportional with flow sharing
Transmission
Hydrostatic with electronic regulation / 4 wheel drive
Main drive
Electronically controlled variable displacement pump. Variable displacement motor. 2-speed gear box
Standard tyres
445/65 R22,5
Towing force
95 kN
Gradeability
44 %
Axle type
Oil-immersed axles with planetary gears
Rear axle
Oscillating and steering with hydraulic locking
Front axle
Oscillating and steering with levelling +/-8°
Service brake
Hydraulically operated wet multi-disk brakes on each axle
Parking brake
Hydraulic with negative action
Steering modes
3 steering modes with semi-automatic wheel realignment. 2 wheel steering / 4 wheel steering / Crab-steer
External turning radius (with forks)
4.1 m
Fuel tank
270 L
Adblue
40 L
Hydraulic reservoir
195 L
Operator noise level (LpA) (En 12053)
73 dB(A)
Level of acoustic power (LWA)
108 dB(A)
Whole body vibration (ISO 2631-1):
0.6 ms-2
Hand-arm vibration (ISO 5349–1)
0.5 ms-2
Standard compliance
EN 1459-2: slewing variable-reach trucks. EN 13000: hydraulic cranes. EN 280: mobile elevating work platforms. FOPS/ROPS cabin. EU 2016/1628: engine emissions

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.