Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

TR40250 EVO Rotary Telescopic Handler

Specifications & Options


Close/Open all PDF version
Lifting height — on stabilisers
24,100 mm
Lifting height — on tyres
20,800 mm
Rated capacity
4,000 kg
Capacity (at max. height on stabilisers)
1,800 kg
Capacity (at max. height on tyres)
1,800 kg
Capacity (at max. reach on stabilisers)
200 kg
Capacity (at max. reach on tyres)
200 kg
Max. reach on stabilisers
20,500 mm
Max. reach on tyres
13,500 mm
On stabilisers, with forks, 90°
On tires, with forks, 90°
On tires, with forks, non rotated
Weight (unladen)
17,540 kg
Standard tyres
18 x 22.5 in, Heavy duty
1st gear / low range
10 km/h
2nd gear / high range
40 km/h
21.8 °
Hydrostatic with variable load sensing pump
Main drive
2-speed gear box
Make / Model
FPT NEF Series
Rated power (ISO 14396:2002) at 2200 RPM
141 HP
Rated power (ISO 14396:2002) at 2200 RPM
105 kW
Maximum torque at 1400 RPM
590 Nm
Number of cylinders
4.5 L
Pump type
Double gear pump
Pump capacity
135 L/min
Relief valve pressure setting
230 bar
Telescope in time at max. reach - no load
23.1 s
Telescope out time at max. reach - no load
44.4 s
Engine braking
Parking and emergency brake
Negative brake with electro-hydraulic command on rear axle
Engine oil
14.4 L
Fuel tank
180 L
Hydraulic reservoir
270 L
Operator noise level (LpA) (EN 12053)
77 dB(A)
Level of acoustic power (LWA)
107 dB(A)
Whole body vibration (EN 13059)
1.1 ms-2
Whole body vibration uncertainty (EN 13059)
0.1 ms-2
Hand-arm vibration (ISO 5349–1)
1.7 ms-2
Overall length (with forks)
9,200 mm
Overall length (fork frame)
8,000 mm
Overall length (without attachment)
5,290 mm
Overall height
3,025 mm
Carriage rotation angle
115 °
Height to back of the machine
2,556 mm
Ground clearance
360 mm
2,950 mm
Operator cab outside width
980 mm
Track width (front & rear)
1,920 mm
Width over standard tyres
2,380 mm
External turning radius (with forks)
7,375 mm
External turning radius (at lifted stabilisers with blocks flipped over)
4,790 mm
External turning radius (at tyres)
4,430 mm
Internal turning radius
1,700 mm
Width with stabilisers down
5,070 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.