Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Telescopic Handlers / T35-105 Telescopic Handler

100HP Specifications

T35.105 100 IV

Close/Open all PDF version
Lifting height — on tyres
10,290 mm
Rated capacity
3,500 kg
Capacity (at max. height on tyres)
400 kg
Capacity (at max. reach on tyres)
600 kg
Max. reach on tyres
6,886 mm
With forks and standard 405/70x20 tyres
With forks and optional 400/80x24 tyres
With jib on 20 or 24 inch tyres
With extension jib on 20 or 24 inch tyres
Weight (unladen)
7,360 kg
Standard tyres
SOLIDEAL 405/70-20 14PR
1st gear / low range
7 km/h
1st gear / high range
26 km/h
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
Bobcat D34
Rated power (ISO 14396:2002) at 2400 RPM
100 HP
Rated power (ISO 14396:2002) at 2400 RPM
74.5 kW
Maximum torque at 1400 RPM
430 Nm
Number of cylinders
3.4 L
*Stage IIIB Bobcat D34 also available in 55kW/75HP version (without SCR/Ad-Blue after-treatment)
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
250 bar
Lift time - no load
11 s
Lower time - no load
6 s
Telescope in time at max. reach - no load
7 s
Telescope in time at max. height - no load
7 s
Telescope out time at max. reach - no load
11.5 s
Telescope out time at max. height - no load
11.5 s
Engine braking
Parking and emergency brake
Passive brake
Fuel tank
130 L
Hydraulic reservoir
71 L
Operator noise level (LpA) (EN 12053)
76 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
0.9 ms-2
Operator cab inside width
857 mm
Overall length (with forks)
6,276 mm
Overall length (fork frame)
5,071 mm
Overall length (without attachment)
4,936 mm
Overall length (Front tire to rear of machine)
4,192 mm
Overall height (with rotating beacon)
2,584 mm
Overall height
2,445 mm
Carriage rotation angle
143 °
Height to back of the machine
1,941 mm
Ground clearance
415 mm
Front axle to front carriage
1,422 mm
2,850 mm
Rear axle to back of machine
799 mm
Operator cab outside width
930 mm
Track width (front & rear)
1,862 mm
Width over standard tyres
2,264 mm
External turning radius (with forks spaced 1040 mm apart)
5,025 mm
External turning radius (with forks spaced 1360 mm apart)
5,116 mm
External turning radius (at tyres)
3,765 mm
Internal turning radius
1,245 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.