Middle East and Africa

North America

Russia & CIS

Southeast Asia

Telescopic Loaders / TL30.70 Telescopic Loader

100HP Specifications

TL30.70 Low Cab 100 IV

Close/Open all PDF version
Lifting height — on tyres
6,675 mm
Rated capacity
3,000 kg
Capacity (at max. height on tyres)
2,000 kg
Capacity (at max. reach on tyres)
1,050 kg
Max. reach on tyres
4,020 mm
With forks on 20 inch tyres
With forks on 24 inch tyres
With jib on 20 or 24 inch tyres
Weight (unladen)
5,800 kg
Standard tyres
SOLIDEAL 405/70-20 14PR
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
1st gear – Turtle (40 KM/H option)
10 (10) km/h
1st gear – Rabbit (40 KM/H option)
31 (40 with 24 inch tyres) km/h
Make / Model
Bobcat D34
Fuel
Diesel
Cooling
Coolant
Rated power (ISO 14396:2002) at 2400 RPM
75 HP
Rated power (ISO 14396:2002) at 2400 RPM
55.2 kW
Maximum torque at 1400 RPM
430 Nm
Number of cylinders
4
Displacement
3.4 L
 
 
*Stage IIIB Bobcat D34 also available in 55kW/75HP version (without SCR/Ad-Blue after-treatment)
 
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
250 bar
Lift time - no load
5.3 s
Lower time - no load
4 s
Telescope in time at max. reach - no load
4.2 s
Telescope in time at max. height - no load
4.2 s
Telescope out time at max. reach - no load
6.3 s
Telescope out time at max. height - no load
6.3 s
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Fuel tank
115 L
Hydraulic reservoir
47 L
Operator noise level (LpA) (EN 12053)
77 dB(A)
Operator noise level (LpA) (EN 12053) uncertainty
4 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
1.7 ms-2
(A)
Overall length (with forks)
6,240 mm
(B)
Overall length (fork frame)
5,035 mm
(C)
Overall length (without attachment)
4,670 mm
(D)
Overall length (Front tire to rear of machine)
4,185 mm
(E)
Overall height (with rotating beacon)
2,290 mm
(F)
Overall height
2,100 mm
(G)
Carriage rotation angle
136 °
(I)
Height to back of the machine
1,587 mm
(J)
Ground clearance
264 mm
(L)
Front axle to front carriage
1,400 mm
(M)
Wheelbase
2,820 mm
(N)
Rear axle to back of machine
667 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,666 mm
(Q)
Width over standard tyres
2,100 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,035 mm
(R)
External turning radius (with forks spaced 1360 mm apart)
5,130 mm
(S)
External turning radius (at tyres)
3,717 mm
(U)
Internal turning radius
1,329 mm
(V)
Operator cab inside width
857 mm