Middle East and Africa

North America

Russia & CIS

Southeast Asia

Telescopic Loaders / TL30.70 Telescopic Loader

75HP Specifications

TL30.70 Low Cab 75 IV

Close/Open all PDF version
Lifting height — on tyres
6,675 mm
Rated capacity
3,000 kg
Capacity (at max. height on tyres)
2,000 kg
Capacity (at max. reach on tyres)
1,050 kg
Max. reach on tyres
4,020 mm
With forks on 20 inch tyres
With forks on 24 inch tyres
With jib on 20 or 24 inch tyres
Weight (unladen)
5,640 kg
Standard tyres
SOLIDEAL 405/70-20 14PR
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
1st gear – Turtle
7.5 km/h
1st gear – Rabbit
29.5 km/h
Make / Model
Bobcat D34
Rated power (ISO 14396:2002) at 2400 RPM:
75 HP
Rated power (ISO 14396:2002) at 2400 RPM:
55.2 kW
Maximum torque at 1400 RPM
325 Nm
Number of cylinders
3.4 L
Pump type
Gear pump with LS valve
Pump capacity
80 L/min
Relief valve pressure setting
250 bar
Lift time - no load
6 s
Lower time - no load
4.2 s
Telescope in time at max. reach - no load
4.2 s
Telescope in time at max. height - no load
4.2 s
Telescope out time at max. reach - no load
7.4 s
Telescope out time at max. height - no load
7.4 s
Engine braking
Parking and emergency brake
Passive brake
Fuel tank
115 L
Hydraulic reservoir
47 L
Operator noise level (LpA) (EN 12053)
77 dB(A)
Operator noise level (LpA) (EN 12053) uncertainty
4 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
1.7 ms-2
Overall length (with forks)
6,240 mm
Overall length (fork frame)
5,035 mm
Overall length (without attachment)
4,670 mm
Overall length (Front tire to rear of machine)
4,185 mm
Overall height (with rotating beacon)
2,290 mm
Overall height
2,100 mm
Carriage rotation angle
136 °
Height to back of the machine
1,587 mm
Ground clearance
264 mm
Front axle to front carriage
1,400 mm
2,820 mm
Rear axle to back of machine
667 mm
Operator cab outside width
930 mm
Track width (front & rear)
1,666 mm
Width over standard tyres
2,100 mm
External turning radius (with forks spaced 1040 mm apart)
5,035 mm
External turning radius (with forks spaced 1360 mm apart)
5,130 mm
External turning radius (at tyres)
3,717 mm
Internal turning radius
1,329 mm
Operator cab inside width
857 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.