Middle East and Africa

North America

Russia & CIS

Southeast Asia

Compact Excavators / E62 Compact Excavator

Specifications & Options


Close/Open All PDF version
Operating weight
6,130 kg
Additional weight for steel tracks
206 kg
Additional weight for long dipperstick
127 kg
Ground pressure with rubber tracks
34.4 kPa
Bucket pivot angle
179 °
Maximum reach of working equipment
6,230 mm
Maximum reach of working equipment, long dipperstick
6,525 mm
Maximum reach at ground level
6,100 mm
Maximum reach at ground level, long dipperstick
6,400 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,530 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,645 mm
Maximum blade height
460 mm
Maximum blade depth
440 mm
Maximum height of working equipment with dipperstick retracted
4,381 mm
Maximum bucket tooth height
5,785 mm
Maximum bucket tooth height, long dipperstick
6,005 mm
Maximum dump height
4,045 mm
Maximum dump height, long dipperstick
4,260 mm
Maximum depth of vertical wall which can be excavated
3,125 mm
Maximum depth of vertical wall which can be excavated, long dipperstick
3,435 mm
Maximum digging depth
3,815 mm
Maximum digging depth, long dipperstick
4,115 mm
(* Dentoes values which long dipperstick installed)
Blade height
410 mm
Clearance, upper structure to ground line
635 mm
Ground line to top of engine cover
1,620 mm
Length of track on ground
1,990 mm
Machine centre line to blade
1,870 mm
Minimum radius in travel position
4,400 mm
Overall length of track assembly
2,500 mm
Overall length in travel position
5,670 mm
Overall length in travel position, long dipperstick
5,669 mm
Track lug height
21 mm
Blade width
1,980 mm
2,550 mm
Track width
400 mm
Machine centre line to working equipment centre line, left-hand rotation
605 mm
Machine centre line to working equipment centre line, right-hand rotation
829 mm
Minimum turning radius
2,530 mm
Swing clearance, rear
1,100 mm
Working width at maximum right-hand rotation
2,147 mm
Make / model
Yanmar / 4TNV94L-ZXSDB
Number of cylinders
3,054 cm3
Maximum NET power (ISO 9249)
36.2 kW
Maximum NET torque (ISO 9249)
206 Nm
Digging force, dipperstick (ISO 6015)
29,300 N
Digging force, long dipperstick (ISO 6015)
26,200 N
Digging force, bucket (ISO 6015)
44,100 N
Drawbar pull
55,000 N
Travel speed, low range
2.7 km/h
Travel speed, high range
4.4 km/h
Pump type
One engine-driven tandem axial piston pump
Pump capacity
132 L/min
Auxiliary flow
85 L/min
System relief pressure for auxiliary circuits
210 bar
Boom swing, left
70 °
Boom swing, right
50 °
Slew rate
9.6 RPM
Cooling system
10 L
Engine lubrication plus oil filter
10.2 L
Fuel reservoir
78 L
Hydraulic system
111 L
Noise level LpA(EU Directive 2006/42/EC)
73 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
97 dB(A)
Whole body vibration (ISO 2631–1)
0.4 ms-2
Hand-arm vibration (ISO 5349–1)
0.9 ms-2
  • 1980 mm dozer blade
  • 400 mm rubber track
  • 5.7 inch LCD screen
  • Engine/hydraulic monitor with shutdown
  • Fingertip auxiliary hydraulic control
  • Control console locks
  • Hydraulic joystick controls
  • Two-speed travel
  • Lockable storage compartment
  • Horn
  • Work lights
  • Retractable seat belt
  • Suspension seat with high back
  • Consoles with forwards/backwards adjustable displacement
  • TOPS/ROPS cab (1)
  • Boom & arm safety valves
  • Harness for rotating beacon
  • Fully adjustable air conditioning
  • Overload warning device
  • Sun visor
  • Left rear view mirror
  • Electric refueling pump
  • Auto idle
  • Auto shift travel
  • Auxiliary hydraulics (1st and 2nd circuits)
  • Auxiliary hydraulic line on arm with quick couplers
  • Warranty: 12 months, 2000 hours (whichever occurs first)

(1) Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117

  • Steel tracks
  • Third auxiliary hydraulic line (Clamshell Piping)
  • Long dipperstick