India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Telehandlers / T35.130S Telescopic Handler

Specifications & Options

T35.130S 100 IIIA

Close/Open All PDF version
With forks and standard 405/70x20 tyres, on stabilizers
With forks and standard 405/70x20 tyres
With forks and optional 400/80x24 tyres, on stabilisers
With forks and optional 400/80x24 tyres
With jib on 20 or 24 inch tyres, on stabilisers
With jib on 20 or 24 inch tyres
With extension jib on 20 or 24 inch tyres, on stabilisers
With extension jib on 20 or 24 inch tyres
  • Air conditioning
  • Boom stop
  • Custom colour
  • Fire extinguisher
  • Forward/Reverse control on Steering Wheel Lever (no longer on joystick)
  • Lockable fuel cap
  • Loudspeaker & radio ready
  • PVC Document holder
  • Protective grill for windshield (front and roof)
  • Rear Flat Mirror
  • Roof window wiper
  • Sun visor
  • Support for vehicle registration plate
  • Wheel wedge
  • Work lights on boom
  • Proportional engine fan with inverter
  • Remote control system with on-board charger
  • Basic option tyres - set of 4 x 400/80-24"
  • Basic tow hitch
  • Boom wiring harness and electric connectors
  • Dunlop tyres - set of 4 x 405/70-24" SPT9 MPT (SEMI INDUSTRIAL)
  • High comfort air suspension seat
  • Keyless ignition (start/stop with keypad)
  • Manitou carriage with manual attachment lock
  • Manitou carriage with hydraulic attachment lock (boom wiring harness mandatory)
  • Michelin tyres - set of 4 x 400/80-24'' 162A8 IND TL POWER CL
  • Pallet forks 1200mm length / Rigid frame / Forks included / Backrest included / For Quicktach tool carrier
  • Pallet forks 1200mm length / Floating / 1,44m carriage / Forks included / Backrest included / For Quicktach tool carrier
  • Quicktach carriage with hydraulic attachment lock (boom wiring harness mandatory)
  • Rotating tow hitch (including rear electric socket)
  • Standard engine ignition (with key) with additional keypad security
  • Pallet forks 1200mm length / Floating / 1,12m carriage / Forks included / Backrest included / For Manitach tool carrier
  • Pallet forks 1200mm length / Floating / 1,44m carriage / Forks included / Backrest included / For Manitach tool carrier
  • Pallet forks 1200mm length / Rigid frame / Forks included / Backrest included / For Manitach tool carrier
  • Cold start
  • Cyclonic air prefilter
Lifting height — on stabilisers
12,468 mm
Lifting height — on tyres
11,658 mm
Rated capacity
3,500 kg
Capacity (at max. height on stabilisers)
3,500 kg
Capacity (at max. height on tyres)
1,000 kg
Capacity (at max. reach on stabilisers)
1,300 kg
Capacity (at max. reach on tyres)
400 kg
Max. reach on tyres
8,764 mm
Weight (unladen)
8,700 kg
Standard tyres
SOLIDEAL 405/70-20 16PR
1st gear / low range
7 km/h
1st gear / high range
26 km/h
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
Perkins / 1104D-44TA
Fuel
Diesel
Cooling
Water
Rated power (ISO 14396)
100 HP
Rated power (ISO 14396)
74.5 kW
Maximum torque at 1400 RPM
410 Nm
Number of cylinders
4
Displacement
4.4 L
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
250 bar
Lift time - no load
14 s
Lower time - no load
8.5 s
Telescope in time at max. reach - no load
11.5 s
Telescope in time at max. height - no load
10.5 s
Telescope out time at max. reach - no load
18 s
Telescope out time at max. height - no load
18 s
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Fuel tank
145 L
Hydraulic reservoir
76 L
Whole body vibration (EN 13059)
1.4 ms-2
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
7,081 mm
(B)
Overall length (fork frame)
5,876 mm
(C)
Overall length (without attachment)
5,541 mm
(D)
Overall length (Front tire to rear of machine)
4,497 mm
(E)
Overall height (with rotating beacon)
2,586 mm
(F)
Overall height
2,449 mm
(G)
Carriage rotation angle
124 °
(I)
Height to back of the machine
1,869 mm
(J)
Ground clearance
422 mm
(L)
Front axle to front carriage
1,919 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
1,107 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,992 mm
(Q)
Width over standard tyres
2,418 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,696 mm
(S)
External turning radius (at tyres)
4,150 mm
(U)
Internal turning radius
1,519 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.