Middle East and Africa

North America

Russia & CIS

Southeast Asia

Telehandlers / T36.120SL Telescopic Handler

Specifications & Options

T36120SL IIIB

Close/Open All PDF version
Lifting height
11,524 mm
Lifting height — on stabilisers
11,871 mm
Rated capacity
3,600 kg
Capacity (at max. height)
2,300 kg
Capacity (at max. height on stabilisers)
3,200 kg
Capacity (at max. reach on stabilisers)
1,200 kg
Capacity (at max. reach)
350 kg
Max. reach
8,198 mm
Crowding force
7,800 daN
With forks and standard 405/70x20 tyres, on stabilizers
With forks and standard 405/70x20 tyres
Weight (unladen)
8,350 kg
Standard tyres
SOLIDEAL 405/70-20 16PR
1st gear / low range
8.5 km/h
2nd gear / high range
30 km/h
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
Deutz TCD 3.6 L4
Fuel
Diesel
Cooling
Liquid
Rated power (ISO 14396:2002) at 2300 RPM
100 HP
Rated power (ISO 14396:2002) at 2300 RPM
74.4 kW
Maximum torque at 1400 RPM
410 Nm
Number of cylinders
4
Displacement
3.6 L
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
255 bar
Lift time - no load
9.8 s
Lower time - no load
6 s
Telescope in time at max. reach - no load
7.9 s
Telescope in time at max. height - no load
7.9 s
Telescope out time at max. reach - no load
12.2 s
Telescope out time at max. height - no load
12.2 s
Engine braking
Hydrostatic
Parking and emergency brake
Negative brake with hydraulic command
Fuel tank
130 L
Hydraulic reservoir
71 L
Operator noise level (LpA) (EN 12053)
76 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
0.9 ms-2
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
6,647 mm
(B)
Overall length (fork frame)
5,442 mm
(C)
Overall length (without attachment)
5,287 mm
(D)
Overall length (Front tire to rear of machine)
4,192 mm
(E)
Overall height (with rotating beacon)
2,584 mm
(F)
Overall height
2,389 mm
(G)
Carriage rotation angle
143 °
(I)
Height to back of the machine
1,941 mm
(J)
Ground clearance
415 mm
(L)
Front axle to front carriage
1,793 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
799 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,862 mm
(Q)
Width over standard tyres
2,264 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,341 mm
(R)
External turning radius (with forks spaced 1360 mm apart)
5,429 mm
(S)
External turning radius (at tyres)
3,765 mm
(U)
Internal turning radius
1,245 mm