Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Telehandlers / TL38.70HF Telescopic Loader

Specifications & Options

TL38.70HF 130 IIIA

Close/Open All PDF version
Lifting height — on tyres
6,889 mm
Rated capacity
3,800 kg
Capacity (at max. height on tyres)
3,500 kg
Capacity (at max. reach on tyres)
1,500 kg
Max. reach on tyres
4,002 mm
With forks on 20 inch tyres
With forks on 24 inch tyres
With jib on 20 or 24 inch tyres
Weight (unladen)
7,320 kg
Standard tyres
SOLIDEAL 405/70-20 14PR
1st gear / low range
6 km/h
1st gear / high range
18 km/h
2nd gear / low range
12 km/h
2nd gear / high range
40 km/h
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor + 2 speed gearbox
Make / Model
Perkins / 1104D-44TA
Rated power (ISO 14396)
130 HP
Rated power (ISO 14396)
96.5 kW
Maximum torque at 1400 RPM
516 Nm
Number of cylinders
4.4 L
Pump type
LS piston pump
Pump capacity
190 L/min
Relief valve pressure setting
255 bar
Lift time - no load
4.9 s
Lower time - no load
4.3 s
Telescope in time at max. reach - no load
4.8 s
Telescope in time at max. height - no load
4.8 s
Telescope out time at max. reach - no load
4.9 s
Telescope out time at max. height - no load
4.7 s
Engine braking
Parking and emergency brake
Passive brake
Fuel tank
138 L
Hydraulic reservoir
59 L
Operator noise level (LpA) (EN 12053)
77 dB(A)
Level of acoustic power (LWA)
107 dB(A)
Whole body vibration (EN 13059)
1.2 ms-2
Operator cab inside width
900 mm
Overall length (with forks)
6,074 mm
Overall length (fork frame)
4,869 mm
Overall length (without attachment)
4,763 mm
Overall length (Front tire to rear of machine)
4,058 mm
Overall height (with rotating beacon)
2,477 mm
Overall height
2,340 mm
Carriage rotation angle
135 °
Height to back of the machine
1,668 mm
Ground clearance
346 mm
Front axle to front carriage
1,356 mm
2,870 mm
Rear axle to back of machine
643 mm
Operator cab outside width
1,013 mm
Track width (front & rear)
1,895 mm
Width over standard tyres
2,300 mm
External turning radius (with forks spaced 1040 mm apart)
4,925 mm
External turning radius (with forks spaced 1360 mm apart)
5,015 mm
External turning radius (at tyres)
3,714 mm
Internal turning radius
1,092 mm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.