China
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

S76 Skid-Steer Loader Specifications & Options

Dimensions

Loader Series R-Series
Rated Operating Capacity (50% of tipping load) 1338 kg (2950 lb.)
Tipping Load (ISO 14397-2) 2676 kg (5900 lb.)
Height to Bucket Hinge Pin 3259 mm (128.3 in.)
Lift Arm Path Vertical

Size and Speed

Operating Weight 3908 kg (8615 lb.)
Width with Bucket 1880 mm (74 in.)
Height with Cab 2078 mm (81.8 in.)
Travel Speed – Low Range 10.9 km/hr. (6.8 mph)
Travel Speed – High Range (optional 2-Speed travel) 18.9 km/hr (11.8 mph)

Engine

Horsepower 74 HP (55.2kW)
Type Turbo Diesel
Fuel Tank Capacity 120.0 L (31.7 gal)
Horsepower Management Included with SJC Option

Control Options

Control Options Bobcat Standard (foot pedals/steering levers)
Selectable Joystick Control (SJC) Opt
Radio Remote Control (SJC required) Opt

Hydraulic System

Hydraulic System Pressure 23.8-24.5 MPa (3450-3550 psi)
Hydraulic Standard Flow 88.1 L/min. (23.3 gpm)
Hydraulic High Flow (optional) 114.7 L/min. (30.3 gpm)
Pressure Release Hydraulic Quick Couplers Std
Speed Management Included with SJC Option

Standard Features

Back-Up Alarm and Horn
Bobcat Interlock Control System (BICS™)
Standard Display (includes keyless start)
LED Front and Rear Work Lights
Mechanical Suspension Seat
ROPS/FOPS Approved Cab Structure
Attachment Control Kit
Bob-Tach Mounting System
Fingertip Auxiliary Hydraulics Control
Pressure Release Hydraulic Quick Couplers

Options

2-Speed Travel
Radio Remote Control (SJC required)
Heated Cloth Air-Ride Seat
Cab with Heat
Cab with Heat and Air Conditioning
Dual Direction Bucket Positioning
Radio
Reversing Fan
Automatic Ride Control
Side Lighting Kit
Sound Reduction
Bob-Dock System
Power Bob-Tach System
Attachment Control Kit

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.