Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

CT1025 Compact Tractor Specifications & Options


Gross Horsepower 24.5 hp
No. of Cylinders 3
Total Displacement 1007 cc
Fuel Tank Capacity 25.5 L

3-Point, PTO & Hydraulics

PTO Horsepower (Average PTO Horsepower ) 20.5 hp
3-Point Hitch Category 1
Lift Control Type Hydraulic Position Control System
Hydraulic Lift Capacity at 24 in. Beyond Lift Point 318 kg.f
Rear PTO 540 rpm
Rear PTO System Independent
Mid-PTO Standard: 2200 rpm
Total Hydraulic Pump Capacity 25.7 L/min
Rear Hydraulics Opt (2)
Lower Links Ball
Lifting Rod Turn-buckle

Drive System

Transmission HST
Speed Ranges 2 Range
Brakes Wet Disc Type
Rear Differential Lock Rear Standard
Four-Wheel Drive STD-Mechanical

Travel Speeds (w/ Ind. Tires)

Forward 0 - 16.5 km/h
Reverse 0 - 11.2 km/h


Overall Length (w/ 3 pt.) 2523 mm
Overall Width (w/ industrial tires) 1168mm
Overall Height (w/ ROPS) 2226 mm
Wheelbase 1400 mm
Ground Clearance 162 mm
Weight 690 kg


Inside Turning Radius 2540 mm
Hydrostatic Power Steering Standard

Safety Equipment

Fold Down ROPS (roll-over protective structure) Std
Fully Retractable Seatbelt Std


Suspension Seat N/A
Adjustable Seat Std
Linked Pedal N/A
Cup Holder Std
Glow Plug Engine Pre-heat Std
Toolbox Std
Head Lights/Tail Lights Std
Cruise Control Opt
Horn/Hazard Flasher/Turn Signals Std
Rear Working Lights Opt
Side Mirror N/A

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.