- Home
- Attachments
- Flail Cutter
Flail Cutter
Flail Cutter
The flail cutter is ideal for cutting overgrowth on construction sites as well as alongside roads and sidewalks. It adjusts to follow ground contour.
Features & Benefits
- Variable speed displacement motor allows the flail cutter to be ”tuned in” to your machine, depending on its hydraulic capacity. By varying the motor displacement to accept auxiliary hydraulic flows ranging from 64 to 151 l/min, the flail cutter can be operated on many different carriers.
- Floating linkage is standard on the flail cutter. This, along with the attachment's compact deck length, lets the unit follow the contour of the land regardless of the pitch or attitude of the carrier, permitting the cutter up to ten degrees of oscillation.
- Safety compliance The flail cutter complies with the SAE J1001 standard for industrial flail mowers. It is standard-equipped with an automatic shut-off device which allows approximately ten inches of vertical travel in the Bob-Tach™; mounting system before the flail cutter shuts down.
- Full width tapered rear roller provides greater turning ability during operation.
- Adjustable rear hatch allows operators to vary the size of discharged material, ranging from small, for mulching applications to coarse for high performance cutting.
Compatible Models
Compact Track Loaders
2
Skid-Steer Loaders
4
Toolcat
1
Flail Cutter | |
---|---|
Specifications
General
Flail Cutter
Length
57.4 in
Flow Rate
17 gpm
Hammers
21
Cutting Capacity
Brush Material up to 3" in Diameter
Blade Tip Speed @ 2000 rpm
8200 ft/min
Cutting Width
78 in
Maximum Blade Tip Speed
9000 ft/min
Blade Tip Speed @ 2200 rpm
9000 ft/min
Operating Weight
1640 lbs
Width
90.8 in
Height
29.7 in
Performance
Flail Cutter
Hydraulic System
Flail Cutter
Dimensions
Flail Cutter
Price
Flail Cutter
Mower Specs
Flail Cutter
Additional Product Information
Flail Cutter
BobQuote
Flail Cutter