India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Compact Excavators / E20z Compact Excavator

Specifications & Options

E20z

Close/Open All PDF version
Operating weight with cab and bucket (ISO 6016)
2,019 kg
Transport mass (no attachment)
1,902 kg
Weight reduction with canopy
-81 kg
Additional weight for long dipperstick
6 kg
Additional weight for long blade
9 kg
Ground pressure with rubber tracks
31.1 kPa
(A)
Bucket pivot angle
196 °
(B)
Maximum reach of working equipment
4,134 mm
(B*)
Maximum reach of working equipment, long dipperstick
4,307 mm
(C)
Maximum reach at ground level
4,089 mm
(C*)
Maximum reach at ground level, long dipperstick
4,264 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
1,592 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
1,611 mm
(E)
Maximum blade height
220 mm
(F)
Maximum blade depth
204 mm
(G)
Maximum height of working equipment with dipperstick retracted
2,564 mm
(H)
Maximum bucket tooth height
3,573 mm
(H*)
Maximum bucket tooth height, long dipperstick
3,701 mm
(I)
Maximum dump height
2,566 mm
(I*)
Maximum dump height, long dipperstick
2,693 mm
(J)
Maximum depth of vertical wall which can be excavated
1,948 mm
(J*)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,115 mm
(K)
Maximum digging depth
2,385 mm
(K*)
Maximum digging depth, long dipperstick
2,565 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
235 mm
(B)
Clearance, upper structure to ground line
419 mm
(C)
Ground line to top of engine cover
1,138 mm
(D)
Length of track on ground
1,258 mm
(E)
Machine centre line to blade
1,045 mm
(F)
Minimum radius in travel position
2,882 mm
(G)
Overall length of track assembly
1,620 mm
(H)
Overall length in travel position
3,688 mm
(H*)
Overall length in travel position, long dipperstick
3,669 mm
(I)
Track lug height
25 mm
(J)
Blade width
980 mm
(J*)
Blade width (extensions extended)
1,360 mm
(K)
Height
2,297 mm
(L)
Track width
230 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
476 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
638 mm
(O)
Minimum turning radius
1,190 mm
(P)
Swing clearance, rear
690 mm
(Q)
Working width at maximum right-hand rotation
1,532 mm
(R)
Working width at maximum left-hand rotation
1,370 mm
Make / model
Kubota / D722-E4B-BCZ-7
Fuel
Diesel
Number of cylinders
3
Displacement
719 cm3
Maximum power @ 2500 rpm (ISO 14396)
10.2 kW
Maximum torque (SAE)
43.5 Nm
Pump type
Dual piston pump with gear pump
Total hydraulic capacity
41.3 L/min
Piston pump capacity
30 L/min
Auxiliary flow
30 L/min
Auxiliary relief
180.0 bar
Digging force, dipperstick (ISO 6015)
10,371 N
Digging force, long dipperstick (ISO 6015)
9,279 N
Digging force, bucket (ISO 6015)
20,835 N
Drawbar pull
19,302 N
Travel speed, low range
2.1 km/h
Travel speed, high range
4.2 km/h
Boom swing, left
80 °
Boom swing, right
60 °
Slew rate
8.4 RPM
Cooling system
3.3 L
Engine lubrication plus oil filter
3.3 L
Fuel reservoir
19 L
Hydraulic reservoir
14.3 L
Hydraulic system
19 L
Noise level LpA(EU Directive 2006/42/EC)
82 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.1 ms-2
Hand-arm vibration (ISO 5349–1)
0.4 ms-2
  • 230 mm rubber track
  • 980 mm dozer blade with two 190 mm blade extensions
  • Battery disconnect switch
  • Control console locks
  • Cupholders
  • Double acting auxiliary hydraulics with quick couplers
  • Engine monitor with auto shutdown
  • Foldable and ergonomic travel pedals
  • Full fuel warning alarm
  • Grease gun holder
  • Heavy counterweight
  • Horn
  • Hydraulic and travel control lockout
  • Hydraulic joystick controls
  • Hydraulically retractable undercarriage from 1360 mm to 980 mm
  • Retractable seat belt
  • TOPS/ROPS/FOPS canopy (1)
  • Two-speed travel
  • Upper structure four point tie down
  • Water separator
  • Work light (boom)
  • Warranty: 24 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • 1st AUX hydraulic on arm
  • 2nd AUX hydraulics
  • Additional lights (2+1)
  • AM/FM MP3 stereo radio
  • Beacon
  • Comfort package (Superior seat for canopy or cloth suspension seat for cab, Autospeed shift, Aux and Off-set pilot control)
  • Demolition package (boom, arm, bucket cylinder covers & HD travel hoses guard)
  • Fire extinguisher
  • Hydraulic clamp
  • Keyless ignition
  • Klac C and MS01 couplers
  • LED lights set
  • Left and right mirror
  • Long dipperstick with clamp eyes
  • Long dozer blade
  • Object handling device (safety valves + overload warning device + lifteye)
  • Special applications kit
  • Travel motion alarm
  • TOPS/ROPS/FOPS cab w/ heater

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.