- Home
- Equipment
- Non-Current Models
- Non-Current Telehandlers
- Bobcat T35.130SLP Construction Telehandler
T35.130SLP Construction Telehandler
T35.130SLP Construction Telehandler
Years of Production: 2021-2024
This is a non-current model and is no longer offered by Bobcat. Please see the current model by clicking here: T36.120SL Construction Telehandler
You can also use the buttons below to shop for parts or find your nearest Bobcat dealer for service, parts, and sales inquiries.
Reach high and far with the Bobcat R-Series T35.130SLP Telehandler thanks to a low center of gravity, long wheelbase, heavy counterweight, and optimum weight distribution. The patented boom positioning system gives you greater productivity thanks to easy and adjustable load placement at height.
T35.130SLP Specifications
Compare
Key Specifications
T35.130SLP Construction Telehandler
Rated Capacity
3500 kg
Lifting height
12.5 m
Rated power (ISO 14396)
74 kW
Max reach
8.8 m
Unladen weight
8630 kg
Load Charts
T35.130SLP Construction Telehandler
With forks and DUNLOP 400/80 x 24 156B (option) tyres
Complies with stability test EN1459 Annex B
With forks and DUNLOP 405/70 x 20 SPT9 (option) tyres
Complies with stability test EN1459 Annex B
With forks and standard 405/70 x 20 tyres or DUNLOP 400/70 x 20 150B 168A2 (option) tyres
Complies with stability test EN1459 Annex B
Performance
T35.130SLP Construction Telehandler
Side shift - Boom at max reach Extended
740.00 MM
Max. gradeability with rated load (24" tyres)
23.00
Leveling - Boom lift angle > 50°
4.00
Lifting height on stabilizers (20" tyres)
12468.00 MM
Max. reach (24" tyres)
8690.00 MM
Side shift - Boom max angle Extended
950.00 MM
Max. reach on stabilizers (24" tyres)
8600.00 MM
Lifting height on stabilizers (24" tyres)
12552.00 MM
Max. gradeability (24" tyres)
24.00
Max. gradeability with rated load (20" tyres)
24.00
Rated capacity
3500.00 KG
Max. reach (20" tyres)
8764.00 MM
Max. gradeability (20" tyres)
24.00
Capacity at max. reach on stabilizers
1300.00 KG
Drawbar pull (20" tyres)
5700.00
Capacity at max. reach (24" tyres)
400.00 KG
Tilt Breakout force
12300.00
Capacity (at max. height on tyres)
3000.00 KG
Lifting height (24" tyres)
12326.00 MM
Max. reach on stabilizers (20" tyres)
8760.00 MM
Reach at max height on tyres (20" tyres)
1607.00 MM
Reach at max height on tyres (24" tyres)
1520.00 MM
Side shift - Boom up 50° Retracted
800.00 MM
Capacity at max. reach (20" tyres)
400.00 KG
Lifting height (20" tyres)
12242.00 MM
Capacity at max. height on stabilizers
3500.00 KG
Side shift - Boom down Retracted
220.00 MM
Drawbar pull (24" tyres)
4900.00
Side shift - Boom up 50° Extended
1800.00 MM
Cycle Times
T35.130SLP Construction Telehandler
Boom retraction
11.50
Dumping
4.50
Boom extension
18.00
Boom raising
14.00
Boom lowering
8.50
Crowding
5.00
Hydraulic System
T35.130SLP Construction Telehandler
Auxiliary flow front
65.00
Pump type
Gear pump with LS valve
Pump capacity
100.00
Control valve type
Open center with flow sharing & flow compensators technology
Relief valve pressure setting
250.00 BAR
Hydraulic tank
76.00 L
Hydraulic filter specs
Full flow filtration
Drive System
T35.130SLP Construction Telehandler
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Traction
T35.130SLP Construction Telehandler
Optional tyres
DUNLOP 405/70R24 168A2
152J MPT SPT9
Standard tyres
405/70-20 16PR TM R4
Max speed - rabbit mode (24" / 20")
30 / 26
Max speed - turtle mode (24" / 20")
8,5 / 7
Brakes
T35.130SLP Construction Telehandler
Parking brake
Passive brake
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Steering
T35.130SLP Construction Telehandler
Steering modes
Button and screen for selection
Steering pump
Priority valve on pump
Steering Mode
2 wheel steering / 4 wheel steering / Crab-steering
Fluid Capacities
T35.130SLP Construction Telehandler
Engine oil with filter
8.50 L
Gear Box
0.80 L
Fuel tank
145.00 L
Cooling system with heater
15.00 L
Axles front/rear
8,2/9,1
Hydraulic system
155.00 L
Fluid Specifications
T35.130SLP Construction Telehandler
Engine oil
"""-30°C to 35°C : SAE10W30 -15°C to 45°C : SAE15W40 -40°C to 30°C : SAE5W30 -10°C to 20°C : SAE20W20 "
Grease for hinges and boom gliders
TOTAL MULTIS EP2
Brake fluid
None. Brakes use hydraulic system pressure
Hydraulic fluid
MS68
Coolant
Ethylen Glycol Mix 50:99
Transmission oil
ELF SF3 / TOTAL DYNATRANS FR
Controls
T35.130SLP Construction Telehandler
Front auxiliary
Variable thumbwheel on joystick
Boom exension /retraction
Variable thumbwheel on joystick
Starting
Key-type starter switch and shutdown.
Service brake
Oil immersed discs
Eco mode
Eco mode switch
Secondary brake
Passive brake
Boom raising / lowering
Joystick electronic
SHS mode
SHS mode switch
Steering
Proportional hydraulic steering via a conventional steering wheel
Speed range and Forward/reverse drive
Switch for hydrostatic motor and switch on joystick or lever for FNR
Engine
Foot accelerator pedal
Auxiliary pressure release
Standard coupler + pressure release on control valve spool
Environmental
T35.130SLP Construction Telehandler
Whole body vibration (EN 13059)
1.40
Safety
T35.130SLP Construction Telehandler
Emergency button, standard
Switches off the engine and blocks boom movements.
Parking brake, standard
Always set brake when leaving the machine
Seat belt, standard
Should always be worn when operating the machine
Grab handles, standard
"Should always be used when entering/exiting the telescopic"
Rear window, standard
For emergency exit
Fully enclosed operator cab. standard
"Enclosed operator cab. Meets SAE-J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and SAE-J1043 and ISO 3449 for Falling Objects Protection Structure (FOPS)."
Front and rear work lights, standard
Use for indoor and low light operation
Back-up alarm, standard
"For use in jobs with low visibility. Alarm sounds when operated in reverse."
Rated load capacity charts, standard
"Attached inside the cab. Provide rated load capacities for loads and attachments."
Electrical
T35.130SLP Construction Telehandler
Starter
3.20
Alternator
90.00
Battery
110.0
Dimensions
T35.130SLP Construction Telehandler
Length - Rear axle to machine rear
1107.00 MM
Overall length (to forks tip)
7081.00 MM
Overall length (to front tyres / Stabilizers (when equipped)
4950.00 MM
Operator cab outside width
930.00 MM
External turning radius (at tyres)
4150.00 MM
Overall length (to forks face)
5876.00 MM
Overall height (with rotating beacon)
2586.00 MM
Height back of the machine
1869.00 MM
Carriage rotation angle
124.00
Internal turning radius (cab)
1519.00 MM
Ground clearance
422.00 MM
Wheelbase
2850.00 MM
Overall length (to headstock pin)
5541.00 MM
Length - Front axle to forks face
1919.00 MM
Width over standard tyres
2418.00 MM
Overall height (with roof wiper)
2430.00 MM
External turning radius (with forks spaced 1040 mm ext.)
5696.00 MM
Track width
1992.00 MM
Engine
T35.130SLP Construction Telehandler
Stroke
127.00 MM
Maximum torque at 1400 rpm
410.00
Rated speed
2200.00 RPM
Rated power (ISO 14396)
74.00 KW
Ignition
Diesel compression
Fuel
DIESEL
Make / Model
PERKINS / 1104D-44TA
Number of Cylinders
4.0
Bore
105.00 MM
Cooling
WATER
Lubrication
Gear pump pressure
Displacement
4.40 L
Crankshaft ventilation
Open breathing
Air filter
Dry replaceable cartridge with safety element
Weights
T35.130SLP Construction Telehandler
Max ground Pressure on stabs
12.0
Unladen weight (20" tyres)
8630.00 KG
Unladen operating Weight on rear axle (24" tyres)
4880.00 KG
Unladen operating Weight (20" tyres)
8810.00 KG
Unlade operating Weight on front axle (24" tyres)
4030.00 KG
Unladen operating Weight on rear axle (20" tyres)
4830.00 KG
Unlade operating Weight on front axle (20" tyres)
3980.00 KG
Max ground Pressure on tyres-hard soil
12.0
Unladen weight (24" tyres)
8730.00 KG
Unladen operating Weight (24" tyres)
8910.00 KG
T35.130SLP Construction Telehandler
TL26.60 Agricultural Telehandler
Compare
TL26.60 Construction Telehandler
Compare
T35.130S Construction Telehandler
Compare
T35.140S Construction Telehandler
Compare
T35.105 Construction Telehandler
Compare
T35.130SLP Features
Performance
2
Reach high and far
The superior stability and balance of our Telehandlers means that most jobs do not require stabilizers. We designed the machine with a low center of gravity, long wheelbase, heavy counterweight, and optimum weight distribution – so you can reach high and far while handling heavy loads with ease in any position. Bobcat Telehandlers are stable by nature!
Compact stabilisers
The easy-to-use compact stabilizers ensure that you can use the machine’s full capabilities in the most confined working areas, even close to a wall. In addition to safe working practice, stabilizers give you a big advantage when you need to get close to a building without losing reach.
Uptime Protection
1
Shielded design
All vital components of your machine are located inside the
highly rigid boom and frame. The frame itself features a robust
box section. The machine’s cylinders, hydraulic systems and
electric harnesses stay well-protected at all times. A steel bottom plate fully protects against shocks coming from the ground.
Ease of use
9
Control at Any height
Bobcat telehandlers provide you with surgical-precision control at any height – thanks to the incredibly smooth transmission, our Boom Positioning System (if equipped), an ergonomic joystick, the inching function, and great visibility from the cab.
Boom Positionning System (BPS)
This unique Bobcat-patented system gives you a huge gain in productivity. The Boom Positioning System (BPS), active on tires and stabilizers, gives you a side-shift movement so you can put the load exactly in the right place. No need to re-position the machine – you get up to 1050 mm side-shift at 14 m height.
All-around visibility
Because it means safety and productivity, we made numerous efforts to give to the operator an excellent visibility.
Lateral visibility thanks to the low-profile engine hood, on the load thanks to the streamlined dashboard, and on top thanks to the optimized FOPS grid.
Butter-smooth automatic transmission
The butter-smooth hydrostatic transmission provides your choice of precise movements or agility. Hydrostatic technology enables automatic drive, inching function for slow delicate approaches, and reduced machine inertia for safe operation on job sites.
Compactness and maneuverability
A big machine can mean big challenges. But with the emphasis on maneuverability, Bobcat Telehandlers thrive on constrained job sites.
First-class comfort
Enjoy the roomy cab with its great comfort features: easy cab access, suspended seat, 360 ergonomics (thanks to the central control panel), and many more. This first-class user experience is further enhanced by amazing visibility.
Interactive LCD display
A clear, easy-to-read overview of all operating parameters ... at the touch of a button. Available in 5-inch or 7-inch with touchscreen as an option, the highly intuitive menu enables navigation via jog shuttle. If equipped, the rear-view camera feed is shown automatically when reversing.
The optional 7" touchscreen display (compatible with gloves) contains a built-in Bluetooth radio, microphone, loudspeakers, phone page and Job Manager (memorization of up to 6 operator setting configurations).
Intuitive Operation
Bobcat makes it easy to simply start working – with a familiar automotive-style control layout, an interactive display, an all-in-one joystick with improved ergonomics, color-coded control elements, and automatic parking brake.
All-in-one & precise joystick
The joystick’s highly ergonomic handle was redesigned with operator feedback. The most important controls are located at your fingertips at all times: drive direction, turtle/rabbit modes, boom movements, auxiliary controls, and shift-on-the-fly settings. Smooth stiffness delivers very precise placements of the load!