Skid-Steer Loaders / S450 Skid-Steer Loader
Specifications & Options
S450
Close/Open All PDF version
Tipping load (ISO 14397-1)
1,215 kg
Rated operating capacity (ISO 14397-1)
608 kg
Pump capacity
64 L/min
System relief at quick couplers
22.4-23.1 MPa
Max. travel speed (low range)
11.4 km/h
Make / Model
Kubota / V2203-M-DI-E2B-BC-3
Fuel
Diesel
Cooling
Liquid
Power at 2800 RPM (ISO 14396 GROSS):
35.9 kW
Torque at 1700 RPM (SAE J1995 Gross):
149.8 Nm
Number of cylinders
4
Displacement
2,196 cm3
Fuel tank
54.5 L
Operating weight
2,365 kg
Shipping weight
2,052 kg
(A)
Operating height
3,558 mm
(B)
Height with operator cab
1,976 mm
(C)
Angle of departure
23 °
(D)
Ground clearance
214 mm
(E)
Wheelbase
900 mm
(F)
Length without attachment
2,502 mm
(G)
Length with standard bucket
3,172 mm
(H)
Rollback at ground position
26 °
(I)
Dump height with standard bucket
2,157 mm
(J)
Height to bucket hinge pin
2,781 mm
(K)
Dump reach at maximum height
587 mm
(L)
Dump angle at maximum height
40 °
(M)
Rollback fully raised at maximum height
91 °
(N)
Width over standard bucket
1,575 mm
(O)
Turning radius with standard bucket
1,940.6 mm
(P)
Track, standard tyres
1,221.7 mm
(Q)
Width over standard tyres
1,490 mm
(Q)
Width over tyres, 10 x 16.5, 10-ply, Heavy duty, offset rims
1,355 mm
Vehicle steering
Direction and speed controlled by two hand levers
Loader hydraulics tilt and lift
Separate foot pedals or Selectable Joystick Controls (SJC)
Front auxiliary (standard)
Electrical switch on right-hand steering lever
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
- Standard Seat
- Automatically activated glow plugs
- Auxiliary hydraulics: variable flow/maximum flow
- Bob-Tach™ frame
- Bobcat Interlock Control System (BICS)
- 10 x 16.5, 10–ply, Heavy duty tyres
- Standard Cab with rear window (1)
- Electrically activated proportional front auxiliary hydraulics
- Engine/hydraulics system shutdown
- Manual
- Lift arm support
- Noise reduction kit
- Operating lights, front and rear
- Parking brake
- Seat belt
- Seat bar
- Spark arrestor muffler
- EAC certification
- Warranty: 24 months or 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I
- Factory Options
- Deluxe instrument panel
- Power Bob-Tach™
- Cab enclosure
- Deluxe pressurized cab with heating
- Deluxe pressurized cab with HVAC
- Hydraulic bucket positioning (including ON/OFF switch)
- 10 x 16.5, 10–ply, Severe duty tyres
- 10 x 16.5, Solid Flex tyres
- Advanced Control System (ACS)
- Selectable Joystick Controls (SJC)
- Air ride seat with 2 point seat belt
- Radio
- Strobe
- Back-up alarm
- Beacon
- Dealer Installed Options
- Cab enclosure kit
- Special applications front door kit
- 200 lbs (74.4 kg) counterweight kit
- Front axle counterweight kit
- Fuel cap locking kit
- Deluxe instrument panel
- Replacement Bob-Tach™
- Fresh air heater kit
- Front door kit
- Door sensor kit
- Plumbing kit for fresh air heater
- Back up alarm kit
- FOPS kit **
- Single-point lift kit
- Power Bob-Tach™ kit
- Operator cab, enclosure kit
- 7-pin attachment control
- Four-point lift kit
- Rear auxiliary hydraulic kit
- Engine block heater kit
- Road kit
- Bucket positioning kit
- Keyless kit
- Rear window wiper kit
- 14-pin attachment control kit
- 4-Way flasher kit
- 80 mm Suspension seat kit
- Cup holder kit
- Headlight guard kit
- Muffler guard kit
- Tail light guard kit
- Angle Brooms
- Auger Accessories
- Augers
- Backhoes
- Bale Forks
- Breaker Accessories
- Breakers
- Brush Saws
- Brushcat™ Rotary Cutters
- Combination Buckets
- Concrete Mixers
- Construction / Industrial Buckets
- Diggers
- Dozer Blades
- Dumping Hoppers
- Fertilizer and Grain Buckets
- Flail Cutters
- General Purpose (GP) Bucket
- Graders
- Grapples, Industrial
- Landplanes
- Landscape Rakes
- Laser Equipment
- Low Profile Buckets
- Miscellaneous
- Mowers
- Pallet Fork Accessories
- Pallet Forks, Hydraulic
- Root Grapples
- Scarifiers
- Scrapers
- Skeleton Buckets
- Snow & Light Material Buckets
- Snow Blades
- Snow Pushers
- Snow V-Blades
- Sod Layers
- Soil Conditioners
- Spreaders
- Sweepers
- Tillers
- Tilt-Tatch
- Utility Forks
- Vibratory Rollers
- Whisker Brooms
- Wood Chippers
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.