- Home
- Equipment
- Non-Current Models
- Non-Current Telehandlers
- T35.130S Construction Telehandler
T35.130S Construction Telehandler
T35.130S Construction Telehandler
Years of Production: 2021-2024
This is a non-current model and is no longer offered by Bobcat. Please see the current model by clicking here: T36.120SL Construction Telehandler
You can also use the buttons below to shop for parts or find your nearest Bobcat dealer for service, parts, and sales inquiries.
Reach high and far with the Bobcat R-Series T35.130S Telehandler far thanks to a low center of gravity, long wheelbase, heavy counterweight, and optimum weight distribution. Handle daily tasks with a familiar, intuitive automotive-style layout and an all-in-one joystick with improved ergonomics.
T35.130S Specifications
Compare
Key Specification
T35.130S Construction Telehandler
Rated Capacity
3500 kg
Lifting height
12.5 m
Rated power (ISO 14396)
74 kW
Max reach
8.8 m
Unladen weight
8520 kg
Load Charts
T35.130S Construction Telehandler
With forks and DUNLOP 400/80 x 24 156B (option) tyres
Complies with stability test EN1459 Annex B
With forks and DUNLOP 405/70 x 20 SPT9 (option) tyres
Complies with stability test EN1459 Annex B
With forks and standard 405/70 x 20 tyres or DUNLOP 400/70 x 20 150B 168A2 (option) tyres
Complies with stability test EN1459 Annex B
Performance
T35.130S Construction Telehandler
Max. gradeability with rated load (24" tyres)
23.00
Lifting height (24" tyres)
11742.00 MM
Max. reach on stabilizers (24" tyres)
8600.00 MM
Max. gradeability (24" tyres)
33.00
Reach at max height on tyres (24" tyres)
2653.00 MM
Max. gradeability (20" tyres)
33.00
Rated capacity
3500.00 KG
Tilt Breakout force
12300.00
Capacity at max. reach (20" tyres)
400.00 KG
Max. reach on stabilizers (20" tyres)
8760.00 MM
Reach at max height on tyres (20" tyres)
2741.00 MM
Drawbar pull (24" tyres)
4900.00
Capacity (at max. height on tyres)
1000.00 KG
Max. gradeability with rated load (20" tyres)
27.00
Capacity at max. reach on stabilizers
1300.00 KG
Lifting height (20" tyres)
11658.00 MM
Max. reach (24" tyres)
8690.00 MM
Drawbar pull (20" tyres)
5700.00
Capacity at max. reach (24" tyres)
400.00 KG
Lifting height on stabilizers (20" tyres)
12468.00 MM
Lifting height on stabilizers (24" tyres)
12552.00 MM
Capacity at max. height on stabilizers
3500.00 KG
Max. reach (20" tyres)
8764.00 MM
Cycle Times
T35.130S Construction Telehandler
Dumping
4.50
Boom lowering
8.50
Boom raising
14.00
Boom extension
18.00
Crowding
5.00
Boom retraction
11.50
Hydraulic System
T35.130S Construction Telehandler
Control valve type
Open center with flow sharing & flow compensators technology
Relief valve pressure setting
250.00 BAR
Hydraulic tank
76.00 L
Hydraulic filter specs
Full flow filtration
Pump capacity
100.00
Auxiliary flow front
65.00
Pump type
Gear pump with LS valve
Drive System
T35.130S Construction Telehandler
Main drive
Hydrostatic motor
Transmission
Hydrostatic with electronic regulation
Traction
T35.130S Construction Telehandler
Optional tyres
MICHELIN 400/80-24 162A8 IND TL POWER CL
Max speed - turtle mode (24" / 20")
8,5 / 7
Max speed - rabbit mode (24" / 20")
30 / 26
Standard tyres
405/70-20 16PR TM R4
Brakes
T35.130S Construction Telehandler
Engine braking
Hydrostatic
Parking brake
Passive brake
Parking and emergency brake
Passive brake
Steering
T35.130S Construction Telehandler
Steering pump
Priority valve on pump
Steering Mode
2 wheel steering / 4 wheel steering / Crab-steering
Steering modes
Button and screen for selection
Fluid Capacities
T35.130S Construction Telehandler
Adblue ® tank
22.40 L
Gear Box
0.80 L
Fuel tank
145.00 L
Cooling system with heater
14.50 L
Engine oil with filter
12.60 L
Hydraulic system
155.00 L
Axles front/rear
8,2/9,1
Fluid Specifications
T35.130S Construction Telehandler
Brake fluid
None. Brakes use hydraulic system pressure
Engine oil
"ACEA E7/9 API CJ-4 or above Viscosity: -30 to 40 °C : SAE 0W30 -20 to 40°C : SAE 5W30 -15 to 40°C : SAE 10W30"
Transmission oil
ELF SF3 / TOTAL DYNATRANS FR
Grease for hinges and boom gliders
TOTAL MULTIS EP2
Coolant
Ethylen Glycol Mix 50:98
Hydraulic fluid
MS68
Controls
T35.130S Construction Telehandler
SHS mode
SHS mode switch
Service brake
Pedal-activated wet multi-disk on front axle
Starting
Key-type starter switch and shutdown.
Boom exension /retraction
Variable thumbwheel on joystick
Secondary brake
Passive brake
Steering
Proportional hydraulic steering via a conventional steering wheel
Front auxiliary
Variable thumbwheel on joystick
Auxiliary pressure release
Standard coupler + pressure release on control valve spool
Speed range and Forward/reverse drive
Switch for hydrostatic motor and switch on joystick or lever for FNR
Engine
Electronic engine speed governor
Eco mode
Eco mode switch
Boom raising / lowering
Joystick electronic
Environmental
T35.130S Construction Telehandler
Operator noise level (LpA) (EN 12053)
75.00
Whole body vibration (EN 13059)
0.90
Level of acoustic power (LWA)
106.00
Safety
T35.130S Construction Telehandler
Grab handles, standard
"Should always be used when entering/exiting the telescopic"
Boom stop, standard
Use for servicing if boom is raised
Parking brake, standard
Always set brake when leaving the machine
Fully enclosed operator cab. standard
"Enclosed operator cab. Meets SAE-J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and SAE-J1043 and ISO 3449 for Falling Objects Protection Structure (FOPS)."
Emergency button, standard
Switches off the engine and blocks boom movements.
Rated load capacity charts, standard
"Attached inside the cab. Provide rated load capacities for loads and attachments."
Front and rear work lights, standard
Use for indoor and low light operation
Back-up alarm, standard
"For use in jobs with low visibility. Alarm sounds when operated in reverse."
Seat belt, standard
Should always be worn when operating the machine
Rear window, standard
For emergency exit
Electrical
T35.130S Construction Telehandler
Battery
110.0
Starter
2.70
Alternator
140.00
Dimensions
T35.130S Construction Telehandler
Height back of the machine
1869.00 MM
Width over standard tyres
2418.00 MM
Carriage rotation angle
124.00
Length - Front axle to forks face
1919.00 MM
External turning radius (with forks spaced 1040 mm ext.)
5696.00 MM
Overall length (to front tyres / Stabilizers (when equipped)
4950.00 MM
Overall height (with roof wiper)
2430.00 MM
Wheelbase
2850.00 MM
Track width
1992.00 MM
External turning radius (at tyres)
4150.00 MM
Overall length (to forks face)
5876.00 MM
Ground clearance
422.00 MM
Overall length (to forks tip)
7081.00 MM
Overall height (with rotating beacon)
2586.00 MM
Overall length (to headstock pin)
5541.00 MM
Length - Rear axle to machine rear
1107.00 MM
Operator cab outside width
930.00 MM
Internal turning radius (cab)
1519.00 MM
Engine
T35.130S Construction Telehandler
Rated speed
2400.00 RPM
Bore
98.00 MM
Air filter
Dry replaceable cartridge with safety element
Make / Model
Bobcat D34
Fuel
"Diesel fuel low Sulphur - EN 590 : 2013 -ASTM D975C-15 Grade 1D or 2D S15"
Lubrication
Gear pump pressure
Rated power (ISO 14396)
74.00 KW
Cooling
COOLANT
Displacement
3.41 L
Ignition
Diesel compression
Maximum torque at 1400 rpm
430.00
Number of Cylinders
4.0
Crankshaft ventilation
Close breathing
Stroke
113.00 MM
Weights
T35.130S Construction Telehandler
Max ground Pressure on stabs
12.0
Unladen weight (24" tyres)
8695.00 KG
Unlade operating Weight on front axle (20" tyres)
3775.00 KG
Unladen weight (20" tyres)
8595.00 KG
Unladen operating Weight on rear axle (24" tyres)
5075.00 KG
Unladen operating Weight (24" tyres)
8900.00 KG
Max ground Pressure on tyres-hard soil
12.0
Unlade operating Weight on front axle (24" tyres)
3825.00 KG
Unladen operating Weight (20" tyres)
8800.00 KG
Unladen operating Weight on rear axle (20" tyres)
5025.00 KG
T35.130S Construction Telehandler
TL26.60 Agricultural Telehandler
Compare
TL26.60 Construction Telehandler
Compare
T35.130SLP Construction Telehandler
Compare
T35.140S Construction Telehandler
Compare
T35.105 Construction Telehandler
Compare
T35.130S Features
Performance
2
Reach high and far
The superior stability and balance of our Telehandlers means that most jobs do not require stabilizers. We designed the machine with a low center of gravity, long wheelbase, heavy counterweight, and optimum weight distribution – so you can reach high and far while handling heavy loads with ease in any position. Bobcat Telehandlers are stable by nature!
Compact stabilisers
The easy-to-use compact stabilizers ensure that you can use the machine’s full capabilities in the most confined working areas, even close to a wall. In addition to safe working practice, stabilizers give you a big advantage when you need to get close to a building without losing reach.
Uptime Protection
2
Shielded design
All vital components of your machine are located inside the
highly rigid boom and frame. The frame itself features a robust
box section. The machine’s cylinders, hydraulic systems and
electric harnesses stay well-protected at all times. A steel bottom plate fully protects against shocks coming from the ground.
3-Year standard warranty
Bobcat Company develops every machine to the highest
standards of quality and durability. That’s why our standard
warranty provides 36 months or 3000 operating hours
(whichever occurs first) of coverage, extendable up to 5 years or 6000 engine hours.
Ease of use
8
Control at Any height
Bobcat telehandlers provide you with surgical-precision control at any height – thanks to the incredibly smooth transmission, our Boom Positioning System (if equipped), an ergonomic joystick, the inching function, and great visibility from the cab.
Intuitive operation
Bobcat makes it easy to simply start working – with a familiar automotive-style control layout, an interactive display, an all-in-one joystick with improved ergonomics, color-coded control elements, and automatic parking brake.
All-around visibility
Because it means safety and productivity, we made numerous efforts to give to the operator an excellent visibility.
Lateral visibility thanks to the low-profile engine hood, on the load thanks to the streamlined dashboard, and on top thanks to the optimized FOPS grid.
All-in-one & precise joystick
The joystick’s highly ergonomic handle was redesigned with operator feedback. The most important controls are located at your fingertips at all times: drive direction, turtle/rabbit modes, boom movements, auxiliary controls, and shift-on-the-fly settings. Smooth stiffness delivers very precise placements of the load!
Butter-smooth automatic transmission
The butter-smooth hydrostatic transmission provides your choice of precise movements or agility. Hydrostatic technology enables automatic drive, inching function for slow delicate approaches, and reduced machine inertia for safe operation on job sites.
Compactness and maneuverability
A big machine can mean big challenges. But with the emphasis on maneuverability, Bobcat Telehandlers thrive on constrained job sites.
First-class comfort
Enjoy the roomy cab with its great comfort features: easy cab access, suspended seat, 360 ergonomics (thanks to the central control panel), and many more. This first-class user experience is further enhanced by amazing visibility.
Interactive LCD display
A clear, easy-to-read overview of all operating parameters ... at the touch of a button. Available in 5-inch or 7-inch with touchscreen as an option, the highly intuitive menu enables navigation via jog shuttle. If equipped, the rear-view camera feed is shown automatically when reversing.
The optional 7" touchscreen display (compatible with gloves) contains a built-in Bluetooth radio, microphone, loudspeakers, phone page and Job Manager (memorization of up to 6 operator setting configurations).