- Home
- Equipment
- Non-Current Models
- Non-Current Telehandlers
- T35.140S Construction Telehandler
T35.140S Construction Telehandler
T35.140S Construction Telehandler
Years of Production: 2021-2024
This is a non-current model and is no longer offered by Bobcat. Please see the current model by clicking here: T41.140SLP Construction Telehandler
You can also use the buttons below to shop for parts or find your nearest Bobcat dealer for service, parts, and sales inquiries.
The Bobcat R-Series T35.140S Telehandler is the perfect worksite buddy on construction sites. Reach high and far thanks to stabilizers, a low center of gravity, long wheelbase, heavy counterweight, and optimum weight distribution.
T35.140S Specifications
Compare
Key Specification
T35.140S Construction Telehandler
Rated Capacity
3500 kg
Lifting height
13.7 m
Rated power (ISO 14396)
74 kW
Max reach
9.4 m
Unladen weight
9000 kg
Load Charts
T35.140S Construction Telehandler
With forks and DUNLOP 405/70 x 20 SPT9 (option) tyres
Complies with stability test EN1459 Annex B
With forks and DUNLOP 400/80 x 24 156B (option) tyres
Complies with stability test EN1459 Annex B
With forks and standard 405/70 x 20 tyres or DUNLOP 400/70 x 20 150B 168A2 (option) tyres
Complies with stability test EN1459 Annex B
Performance
T35.140S Construction Telehandler
Max. reach on stabilizers (24" tyres)
9720.00 MM
Max. reach on stabilizers (20" tyres)
9810.00 MM
Tilt Breakout force
12300.00
Drawbar pull (24" tyres)
4900.00
Capacity (at max. height on tyres)
500.00 KG
Lifting height (24" tyres)
12794.00 MM
Reach at max height on tyres (24" tyres)
2087.00 MM
Capacity at max. reach (24" tyres)
150.00 KG
Capacity at max. reach on stabilizers
1000.00 KG
Lifting height on stabilizers (24" tyres)
13656.00 MM
Rated capacity
3500.00 KG
Max. gradeability with rated load (24" tyres)
23.00
Max. reach (24" tyres)
9449.00 MM
Capacity at max. height on stabilizers
3500.00 KG
Max. gradeability (24" tyres)
24.00
Cycle Times
T35.140S Construction Telehandler
Boom extension
20.50
Crowding
5.00
Dumping
4.50
Boom retraction
13.00
Boom lowering
8.50
Boom raising
14.00
Hydraulic System
T35.140S Construction Telehandler
Hydraulic filter specs
Full flow filtration
Pump type
Gear pump with LS valve
Pump capacity
100.00
Hydraulic tank
76.00 L
Control valve type
Open center with flow sharing & flow compensators technology
Relief valve pressure setting
250.00 BAR
Auxiliary flow front
65.00
Drive System
T35.140S Construction Telehandler
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Traction
T35.140S Construction Telehandler
Max speed - rabbit mode (24" / 20")
30 / 26
Standard tyres
400/80-24 / 20PR TM R4
Max speed - turtle mode (24" / 20")
8,5 / 7
Brakes
T35.140S Construction Telehandler
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Parking brake
Passive brake
Steering
T35.140S Construction Telehandler
Steering Mode
2 wheel steering / 4 wheel steering / Crab-steering
Steering modes
Button and screen for selection
Steering pump
Priority valve on pump
Fluid Capacities
T35.140S Construction Telehandler
Cooling system with heater
15.00 L
Hydraulic system
157.00 L
Gear Box
0.80 L
Engine oil with filter
8.50 L
Axles front/rear
8,2/9,1
Fuel tank
145.00 L
Fluid Specifications
T35.140S Construction Telehandler
Transmission oil
ELF SF3 / TOTAL DYNATRANS FR
Grease for hinges and boom gliders
TOTAL MULTIS EP2
Engine oil
"""-30°C to 35°C : SAE10W30 -15°C to 45°C : SAE15W40 -40°C to 30°C : SAE5W30 -10°C to 20°C : SAE20W20 "
Coolant
Ethylen Glycol Mix 50:104
Brake fluid
None. Brakes use hydraulic system pressure
Hydraulic fluid
MS68
Controls
T35.140S Construction Telehandler
Engine
Foot accelerator pedal
Auxiliary pressure release
Standard coupler + pressure release on control valve spool
Secondary brake
Passive brake
Boom exension /retraction
Variable thumbwheel on joystick
Service brake
Oil immersed discs
Front auxiliary
Variable thumbwheel on joystick
Eco mode
Eco mode switch
Steering
Proportional hydraulic steering via a conventional steering wheel
Starting
Key-type starter switch and shutdown.
Speed range and Forward/reverse drive
Switch for hydrostatic motor and switch on joystick or lever for FNR
Boom raising / lowering
Joystick electronic
SHS mode
SHS mode switch
Environmental
T35.140S Construction Telehandler
Whole body vibration (EN 13059)
1.00
Safety
T35.140S Construction Telehandler
Parking brake, standard
Always set brake when leaving the machine
Rear window, standard
For emergency exit
Rated load capacity charts, standard
"Attached inside the cab. Provide rated load capacities for loads and attachments."
Seat belt, standard
Should always be worn when operating the machine
Grab handles, standard
"Should always be used when entering/exiting the telescopic"
Back-up alarm, standard
"For use in jobs with low visibility. Alarm sounds when operated in reverse."
Emergency button, standard
Switches off the engine and blocks boom movements.
Front and rear work lights, standard
Use for indoor and low light operation
Fully enclosed operator cab. standard
"Enclosed operator cab. Meets SAE-J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and SAE-J1043 and ISO 3449 for Falling Objects Protection Structure (FOPS)."
Electrical
T35.140S Construction Telehandler
Alternator
90.00
Battery
110.0
Starter
3.20
Dimensions
T35.140S Construction Telehandler
Ground clearance with 24" tyres
509.00 MM
Internal turning radius with 24" tyres (cab)
1519.00 MM
Overall length (to forks face)
6108.00 MM
Overall length (to front tyres 24" / Stabilizers (when equipped)
4950.00 MM
Track width
1992.00 MM
Width over standard tyres
2418.00 MM
Carriage rotation angle
124.00
Overall height with 24" tyres (with rotating beacon)
2673.00 MM
Length - Front axle to forks face
2151.00 MM
Overall height with 24" tyres (with roof wiper)
2520.00 MM
External turning radius with 24" tyres (with forks spaced 1040 mm ext.)
5640.00 MM
Height back of the machine with 24" tyres
1956.00 MM
Wheelbase
2850.00 MM
Overall length (to forks tip)
7313.00 MM
Overall length (to headstock pin)
5709.00 MM
Length - Rear axle to machine rear
1107.00 MM
External turning radius with 24" tyres (at tyres)
4150.00 MM
Operator cab outside width
930.00 MM
Engine
T35.140S Construction Telehandler
Cooling
WATER
Fuel
DIESEL
Air filter
Dry replaceable cartridge with safety element
Maximum torque at 1400 rpm
410.00
Stroke
127.00 MM
Lubrication
Gear pump pressure
Rated power (ISO 14396)
74.00 KW
Crankshaft ventilation
Open breathing
Ignition
Diesel compression
Displacement
4.40 L
Make / Model
PERKINS / 1104D-44TA
Rated speed
2200.00 RPM
Number of Cylinders
4.0
Bore
105.00 MM
Weights
T35.140S Construction Telehandler
Max ground Pressure on stabs
12.0
Max ground Pressure on tyres-hard soil
12.0
Unladen operating Weight (24" tyres)
9200.00 KG
Unladen weight (24" tyres)
9000.00 KG
Unlade operating Weight on front axle (24" tyres)
4100.00 KG
Unladen operating Weight on rear axle (24" tyres)
5100.00 KG
T35.140S Construction Telehandler
TL26.60 Agricultural Telehandler
Compare
TL26.60 Construction Telehandler
Compare
T35.130S Construction Telehandler
Compare
T35.130SLP Construction Telehandler
Compare
T35.105 Construction Telehandler
Compare
T35.140S Features
Performance
2
Reach high and far
The superior stability and balance of our Telehandlers means that most jobs do not require stabilizers. We designed the machine with a low center of gravity, long wheelbase, heavy counterweight, and optimum weight distribution – so you can reach high and far while handling heavy loads with ease in any position. Bobcat Telehandlers are stable by nature!
Compact stabilisers
The easy-to-use compact stabilizers ensure that you can use the machine’s full capabilities in the most confined working areas, even close to a wall. In addition to safe working practice, stabilizers give you a big advantage when you need to get close to a building without losing reach.
Uptime Protection
2
Shielded design
All vital components of your machine are located inside the
highly rigid boom and frame. The frame itself features a robust
box section. The machine’s cylinders, hydraulic systems and
electric harnesses stay well-protected at all times. A steel bottom plate fully protects against shocks coming from the ground.
3-Year standard warranty
Bobcat Company develops every machine to the highest
standards of quality and durability. That’s why our standard
warranty provides 36 months or 3000 operating hours
(whichever occurs first) of coverage, extendable up to 5 years or 6000 engine hours.
Ease of use
8
Control at Any height
Bobcat telehandlers provide you with surgical-precision control at any height – thanks to the incredibly smooth transmission, our Boom Positioning System (if equipped), an ergonomic joystick, the inching function, and great visibility from the cab.
Intuitive operation
Bobcat makes it easy to simply start working – with a familiar automotive-style control layout, an interactive display, an all-in-one joystick with improved ergonomics, color-coded control elements, and automatic parking brake.
All-around visibility
Because it means safety and productivity, we made numerous efforts to give to the operator an excellent visibility.
Lateral visibility thanks to the low-profile engine hood, on the load thanks to the streamlined dashboard, and on top thanks to the optimized FOPS grid.
All-in-one & precise joystick
The joystick’s highly ergonomic handle was redesigned with operator feedback. The most important controls are located at your fingertips at all times: drive direction, turtle/rabbit modes, boom movements, auxiliary controls, and shift-on-the-fly settings. Smooth stiffness delivers very precise placements of the load!
Butter-smooth automatic transmission
The butter-smooth hydrostatic transmission provides your choice of precise movements or agility. Hydrostatic technology enables automatic drive, inching function for slow delicate approaches, and reduced machine inertia for safe operation on job sites.
Compactness and maneuverability
A big machine can mean big challenges. But with the emphasis on maneuverability, Bobcat Telehandlers thrive on constrained job sites.
First-class comfort
Enjoy the roomy cab with its great comfort features: easy cab access, suspended seat, 360 ergonomics (thanks to the central control panel), and many more. This first-class user experience is further enhanced by amazing visibility.
Interactive LCD display
A clear, easy-to-read overview of all operating parameters ... at the touch of a button. Available in 5-inch or 7-inch with touchscreen as an option, the highly intuitive menu enables navigation via jog shuttle. If equipped, the rear-view camera feed is shown automatically when reversing.
The optional 7" touchscreen display (compatible with gloves) contains a built-in Bluetooth radio, microphone, loudspeakers, phone page and Job Manager (memorization of up to 6 operator setting configurations).