Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Компактные экскаваторы / Компактный экскаватор E50

Спецификации и опции


Закрыть/открыть все PDF version
Operating weight
4,905 kg
Additional weight for cab with HVAC
19 kg
Additional weight for long dipperstick
235 kg
Ground pressure with rubber tracks
26.9 kPa
Bucket pivot angle
185 °
Maximum reach of working equipment
6,062 mm
Maximum reach of working equipment, long dipperstick
6,441 mm
Maximum reach at ground level
5,939 mm
Maximum reach at ground level, long dipperstick
6,333 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,541 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,639 mm
Maximum blade height
385 mm
Maximum blade depth
465 mm
Maximum height of working equipment with dipperstick retracted
4,269 mm
Maximum bucket tooth height
5,595 mm
Maximum bucket tooth height, long dipperstick
5,850 mm
Maximum dump height
3,924 mm
Maximum dump height, long dipperstick
4,179 mm
Maximum depth of vertical wall which can be excavated
2,815 mm
Maximum depth of vertical wall which can be excavated, long dipperstick
3,199 mm
Maximum digging depth
3,524 mm
Maximum digging depth, long dipperstick
3,923 mm
(* Dentoes values which long dipperstick installed)
Blade height
446 mm
Clearance, upper structure to ground line
640 mm
Ground line to top of engine cover
1,575 mm
Length of track on ground
1,998 mm
Machine centre line to blade
1,788 mm
Minimum radius in travel position
4,294 mm
Overall length of track assembly
3,049 mm
Overall length in travel position
5,555 mm
Overall length in travel position, long dipperstick
5,563 mm
Track lug height
25 mm
Blade width
1,960 mm
2,541 mm
Track width
400 mm
Machine centre line to working equipment centre line, left-hand rotation
586 mm
Machine centre line to working equipment centre line, right-hand rotation
675 mm
Minimum turning radius
2,027 mm
Swing clearance, rear
997 mm
Swing clearance, rear (zero tail swing), long dipperstick
1,071 mm
Working width at maximum right-hand rotation
2,074 mm
Working width at maximum left-hand rotation
1,874 mm
Make / model
Kubota / V2403-M-D1-TE3B-BC-4
Number of cylinders
2,433 cm3
Maximum NET power (ISO 9249)
35.4 kW
Maximum NET torque (ISO 9249)
179.5 Nm
Pump type
Single outlet variable displacement, load sensing torque limited pump
Piston pump capacity
138.5 L/min
Auxiliary flow
75.7 L/min
Auxiliary relief
210.0 bar
Digging force, dipperstick (ISO 6015)
28,700 N
Digging force, long dipperstick (ISO 6015)
26,100 N
Digging force, bucket (ISO 6015)
42,000 N
Drawbar pull
52,343 N
Travel speed, low range
3.1 km/h
Travel speed, high range
5 km/h
Boom swing, left
75 °
Boom swing, right
50 °
Slew rate
Cooling system
8.3 L
Engine lubrication plus oil filter
7.1 L
Fuel reservoir
79.9 L
Hydraulic reservoir
15.1 L
Hydraulic system
54.9 L
Noise level LpA(EU Directive 2006/42/EC)
81 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
96 dB(A)
Whole body vibration (ISO 2631–1)
0.2 ms-2
Hand-arm vibration (ISO 5349–1)
0.4 ms-2
  • 1960 mm dozer blade
  • 400 mm rubber track
  • Auto idle
  • Auto shift travel
  • Auxiliary hydraulics with Quick Couplers
  • Selectable auxiliary hydraulic flow
  • Blade float feature
  • Clamp ready
  • Control console locks
  • Cupholder
  • Engine/hydraulic monitor with shutdown
  • Fingertip auxiliary hydraulic control
  • Horn
  • Full fuel warning alarm
  • Hydraulic joystick controls
  • Machine IQ (telematic)
  • Retractable seat belt
  • Suspension seat with high back
  • TOPS/ROPS* canopy (1)
  • Two-speed travel
  • Work lights
  • Warranty: 24 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117.

  • Air conditioning
  • Long dipperstick
  • 2nd Auxiliary hydraulics
  • Dlx textile suspension seat
  • Boom safety valve with overload warning
  • Boom & arm safety valves with overload warning
  • AM/FM stereo radio
  • FOGS kit (Overhead guard)
  • Lifting chain kit
  • Travel motion alarm
  • Steel tracks
  • Beacon kit
  • Left and right mirror
  • Additional work light kit
  • Rubber bolt-on pads for steel tracks
  • Special applications kit
  • Hydraulic coupler lines

Некоторые данные основаны на инженерных расчетах, а не на результатах измерений. Данные приведены только для целей сравнения и могут быть изменены без предварительного уведомления. Технические данные вашей машины Bobcat могут варьироваться в соответствии с обычными изменениями, которые могут быть внесены в конструкцию или технологию изготовления, а также в соответствии с условиями работы и другими факторами.