- Home
- Equipment
- Telehandlers
- Bobcat T35.105L Construction Telehandler
T35.105L Construction Telehandler
T35.105L Construction Telehandler
The Bobcat R-Series T35.105L Telehandler offers a 10-meter boom without stabilizers for all your construction needs. The machine offers a great balance between maneuverability and performance, and the levelling feature brings outstanding stability. Handle daily tasks with a familiar, intuitive automotive-style layout and an all-in-one joystick with improved ergonomics.
TL35.105L Overview
T35.105L components are well protected thanks to the shielded design, while the robust frame and boom make Bobcat Telehandlers extra tough. The smooth and automatic transmission offers surgical precision and maximum uptime with a standard 3-year warranty (or 3000 hours) on the entire machine for peace of mind.
T35.105L Specifications
Compare
Key Specifications
T35.105L Construction Telehandler
Rated Capacity
3500 kg
Lifting height
10.3 m
Rated power (ISO 14396)
74 kW
Max reach
6.9 m
Unladen weight
7040 kg
Load Charts
T35.105L Construction Telehandler
With forks and DUNLOP 405/70 x 20 SPT9 (option) tyres
Complies with stability test EN1459 Annex B
With forks and DUNLOP 400/80 x 24 156B (option) tyres
Complies with stability test EN1459 Annex B
With forks and standard 405/70 x 20 tyres or DUNLOP 400/70 x 20 150B 168A2 (option) tyres
Complies with stability test EN1459 Annex B
Performance
T35.105L Construction Telehandler
Lifting height (20" tyres)
10290.00 MM
Reach at max height on tyres (24" tyres)
1389.00 MM
Max. reach (24" tyres)
6795.00 MM
Rated capacity
3500.00 KG
Capacity at max. reach (24" tyres)
600.00 KG
Max. reach (20" tyres)
6886.00 MM
Drawbar pull (24" tyres)
4900.00
Tilt Breakout force
7800.00
Capacity (at max. height on tyres)
2500.00 KG
Lifting height (24" tyres)
10375.00 MM
Drawbar pull (20" tyres)
5700.00
Capacity at max. reach (20" tyres)
600.00 KG
Reach at max height on tyres (20" tyres)
1480.00 MM
Cycle Times
T35.105L Construction Telehandler
Boom lowering no load
6 sec SEC
Boom extension at max. height no load
11.5 sec SEC
Boom extension at max. reach no load
11.5 sec SEC
Frame level in
20 sec SEC
Frame level out
20 sec SEC
Boom raising no load
11 sec SEC
Dumping
4.00
Boom retraction at max. reach no load
7 sec SEC
Crowding
4.50
Boom retraction at max. height no load
7 sec SEC
Hydraulic System
T35.105L Construction Telehandler
Hydraulic filter
Full flow filtration
Control valve
Open center with flow sharing & flow compensators technology
Auxiliary flow front
65.00
Pump capacity
100.00
Relief valve pressure
250 bar BAR
Pump type
Gear pump with LS valve
Hydraulic tank
69.00 L
Drive System
T35.105L Construction Telehandler
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Traction
T35.105L Construction Telehandler
Turtle speed 20"
7 kmh KPH
Turtle speed 24"
8.5 kmh KPH
Optional tyres
DUNLOP 405/70R24 168A2
152J MPT SPT9
Rabbit speed 24"
30 kmh KPH
Rabbit speed 20"
26 kmh KPH
Standard tyres
405/70-20 16PR TM R4
Brakes
T35.105L Construction Telehandler
Engine braking
Hydrostatic
Service brake
Oil immersed discs
Parking and emergency brake
Passive brake
Steering
T35.105L Construction Telehandler
Steering mode selection
Button and screen for selection
Steering mode
2 wheel steering / 4 wheel steering / Crab-steering
Steering pump
Priority valve on pump
Fluid Capacities
T35.105L Construction Telehandler
Axles rear
9.1 l L
Cooling system with heater
15.00 L
Hydraulic reservoir
69 l L
Hydraulic system plus reservoir
121 l L
Axles front
8.2 l L
Gear Box
0.80 L
Engine oil with filter
8.50 L
Fuel tank
130.00 L
Fluid Specifications
T35.105L Construction Telehandler
Grease for hinges and boom gliders
TOTAL MULTIS EP2
Engine oil
"""-30°C to 35°C : SAE10W30 -15°C to 45°C : SAE15W40 -40°C to 30°C : SAE5W30 -10°C to 20°C : SAE20W20 "
Transmission oil
ELF SF3 / TOTAL DYNATRANS FR
Hydraulic fluid
MS68
Brake fluid
None. Brakes use hydraulic system pressure
Coolant
Ethylen Glycol Mix 50:84
Controls
T35.105L Construction Telehandler
Speed range and Forward/reverse drive
Switch for hydrostatic motor and switch on joystick or lever for FNR
Eco mode
Eco mode switch
Steering
Proportional hydraulic steering via a conventional steering wheel
Service brake
Pedal-activated wet multi-disk on front axle
Engine
Foot accelerator pedal
Secondary brake
Passive brake
Starting
Key-type starter switch and shutdown.
Front auxiliary
Variable thumbwheel on joystick
Auxiliary pressure release
Standard coupler + pressure release on control valve spool
SHS mode
SHS mode switch
Boom exension /retraction
Variable thumbwheel on joystick
Boom raising / lowering
Joystick electronic
Environmental
T35.105L Construction Telehandler
Whole body vibration (EN 13059)
0.90
Safety
T35.105L Construction Telehandler
Seat belt, standard
Should always be worn when operating the machine
Rear window, standard
For emergency exit
Front and rear work lights, standard
Use for indoor and low light operation
Back-up alarm, standard
"For use in jobs with low visibility. Alarm sounds when operated in reverse."
Emergency button, standard
Switches off the engine and blocks boom movements.
Rated load capacity charts, standard
"Attached inside the cab. Provide rated load capacities for loads and attachments."
Grab handles, standard
"Should always be used when entering/exiting the telescopic"
Fully enclosed operator cab. standard
"Enclosed operator cab. Meets SAE-J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and SAE-J1043 and ISO 3449 for Falling Objects Protection Structure (FOPS)."
Parking brake, standard
Always set brake when leaving the machine
Electrical
T35.105L Construction Telehandler
Starter
3.2 kW (4.3 HP)
Battery
110 (option 140)
Alternator
90 (option 110)
Dimensions
T35.105L Construction Telehandler
Overall length (to forks tip)
6276.00 MM
Overall length (to forks face)
5071.00 MM
Overall length (to headstock pin)
4658.00 mm MM
Length - Front axle to forks face
1422.00 MM
Wheelbase
2850.00 MM
Length - Rear axle to machine rear
799.00 MM
Operator cab outside width
930.00 MM
Track width
1862.00 MM
Width over standard tyres
2264.00 MM
External turning radius (at tyres)
3765.00 MM
Internal turning radius (cab)
1245.00 MM
Carriage rotation angle
143.00
Height back of the machine with 20" tyres
1941 mm MM
Ground clearance with 24" tyres
506 mm MM
External turning radius with 20" tyres (with forks spaced 1040 mm ext.)
5025 mm MM
Overall height with 20" tyres (with roof wiper)
2430 mm MM
Overall height with 20" tyres (with rotating beacon)
2584 mm MM
Ground clearance with 20" tyres
422 mm MM
Height back of the machine with 24" tyres
2026 mm MM
Overall length (to front tyres 20")
4192 mm MM
Overall height with 24" tyres (with rotating beacon)
2669 mm MM
External turning radius with 24" tyres (with forks spaced 1040 mm ext.)
5025 mm MM
Overall height with 24" tyres (with roof wiper)
2515 mm MM
Overall length (to front tyres 24")
4283 mm MM
Engine
T35.105L Construction Telehandler
Maximum torque at rated speed
410 nm NEWTON-M
Make / Model
PERKINS / 1104D-44TA
Number of cylinders
4
Bore
105.00 MM
Rated torque speed
1400
Fuel
Diesel
Air filter
Dry replaceable cartridge with safety element
Maximum power at rated speed (ISO14396)
74
Cooling
Water
Displacement
4400
Lubrication
Gear pump pressure
Ignition
Diesel compression
Rated power speed
2200
Stroke
127.00 MM
Crankshaft ventilation
Open breathing
Weights
T35.105L Construction Telehandler
Unlade operating Weight on front axle (20" tyres)
2945.00 KG
Unladen operating weight on rear axle (20" tyres)
4285.00 KG
Unladen operating weight (24" tyres)
7330.00 KG
Unladen shipping weight (20" tyres)
7040 kg KG
Unladen shipping weight (24" tyres)
7140 kg KG
Unladen operating weight (20" tyres)
7230.00 KG
Unladen operating weight on rear axle (24" tyres)
4335.00 KG
Unlade operating Weight on front axle (24" tyres)
2995.00 KG
Instruments
T35.105L Construction Telehandler
Instruments
yes
Engine RPM
yes
Total operating hours
yes
Job hours
yes
Boom angle
yes
Vehicle speed
yes
Fuel gauge
yes
Engine coolant temperature gauge
yes
Front and rear wheel alignment status on screen
yes
Headlight full beam
yes
Headlight low beam
yes
Position lights
yes
Left and right turn
yes
Trailer turn
yes
Parking brake
yes
Longitudinal stability level
yes
Windscreen wipers
yes
Work lights
yes
Flashing warning light
yes
Hazard warning lights
yes
Gear Speed choice
yes
Hydraulic function lock
yes
Rear fog lights
yes
Heater fan
yes
Hydraulic fluid over-temperature
yes
Engine coolant over-temperature
yes
Low oil pressure
yes
Battery not charging
yes
Longitudinal stability alarm
yes
Serviceability
T35.105L Construction Telehandler
Serviceability
yes
Air cleaner
yes
Fuel filter
yes
Engine oil filter
yes
Engine oil dipstick
yes
Starter
yes
Alternator
yes
Glass washer fluid
yes
Fuses, diodes and relays
yes
ISL control box
yes
Standard Features
T35.105L Construction Telehandler
Floating forks 1200x100x50 mm / 1.0 m carriage width / Backrest included / For Quicktach
yes
Quicktach carriage with manual attachment lock
yes
Auxiliary hydraulic line on boom head with Fast Connect System (FCS)
yes
Heavy Duty axles
yes
Box-welded frame with shielded bottom plate to protect vital parts
yes
Frame leveling
yes
Boom stop
yes
Halogen road lights (front & rear)
yes
Right and left side mirrors
yes
*********************************************************************
yes
Cabin with full-glass window door
yes
Full tinted glass
yes
ROPS/FOPS (level II) operator cabin
yes
Automatic parking brake
yes
Halogen work lights on top of the cabin (2 front + 1 rear) and right rear corner of the machine (x1)
yes
Halogen rotating beacon
yes
Rear wiper with washer
yes
Front wiper with washer (high, low & intermittent speeds)
yes
Tilting steering column
yes
Mechanical suspension seat
yes
Heating, demisting and ventilation
yes
Back-up alarm
yes
Aggravating Movements Arrester (AMA) compliant with EN15000
yes
Standard 5'' display with navigation jog shuttle (anti-theft, on-fly settings, rear camera ready & diagnostic page)
yes
USB plug (mobile charging)
yes
Standard proportional joystick (forward/reverse drive and turtle/rabbit speed)
yes
Speed management (Creep) to adjust max drive speed whatever engine RPM
yes
Auxiliary Flow Management (AFM) to adjust and engage a permanent hydraulic flow
yes
3 steering modes (2WS /4WS/CRAB) with semi-automatic wheel realignment (manual mode still available)
yes
Hydrostatic transmission with electronic regulation
yes
2 hydrostatic speeds (turtle/rabbit) with auto-shift
yes
30 km/h max drive speed with 24" tyres (may vary according to applicable regulations)
yes
Inching function combined with brake pedal (for easy low speed approach without changing engine rpm)
yes
Standard tyres - set of 4 x 405/70-20''
yes
Turbo-charged engine - Perkins Stage IIIA - 100 hp / 410 Nm
yes
Mechanical fuel injection - No DPF After treatment system
yes
Electronic Battery Disconnection (EBD)
yes
Gear pump 100 l/min with Load Sensing valve
yes
**************************************************************
yes
3 year warranty or 3000 hours (refer to the Bobcat standard warranty policy for terms and conditions)
yes
T35.105L Construction Telehandler
TL30.60 Construction Telehandler
Compare
TL30.70 Construction Telehandler
Compare
TL35.70 Construction Telehandler
Compare
T36.120SL Construction Telehandler
Compare
T40.180SLP Construction Telehandler
Compare
T41.140SLP Construction Telehandler
Compare
TL35.105l Video Gallery
See the New R-Series Telehandlers for Construction in Action