Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Компактные экскаваторы / Компактный экскаватор E27z

Спецификации и опции


Закрыть/открыть все PDF version
Operating weight with cab and bucket (ISO 6016)
2,705 kg
Transport mass (no attachment)
2,571 kg
Weight reduction with canopy
-118 kg
Additional weight for steel tracks
119 kg
Additional weight for long dipperstick
10 kg
Additional weight for heavy counterweight:
123 kg
Ground pressure with rubber tracks
25 kPa
Bucket pivot angle
185 °
Maximum reach of working equipment
4,644 mm
Maximum reach of working equipment, long dipperstick
4,931 mm
Maximum reach at ground level
4,518 mm
Maximum reach at ground level, long dipperstick
4,814 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,131 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,135 mm
Maximum blade height
385 mm
Maximum blade depth
420 mm
Maximum height of working equipment with dipperstick retracted
3,247 mm
Maximum bucket tooth height
4,230 mm
Maximum bucket tooth height, long dipperstick
4,430 mm
Maximum dump height
3,043 mm
Maximum dump height, long dipperstick
3,243 mm
Maximum depth of vertical wall which can be excavated
1,567 mm
Maximum depth of vertical wall which can be excavated, long dipperstick
1,818 mm
Maximum digging depth
2,547 mm
Maximum digging depth, long dipperstick
2,847 mm
(* Dentoes values which long dipperstick installed)
Blade height
319 mm
Clearance, upper structure to ground line
539 mm
Ground line to top of engine cover
1,540 mm
Length of track on ground
1,543 mm
Machine centre line to blade
1,462 mm
Minimum radius in travel position
3,343 mm
Overall length of track assembly
1,965 mm
Overall length in travel position
4,325 mm
Track lug height
21 mm
Blade width
1,550 mm
2,438 mm
Track width
300 mm
Machine centre line to working equipment centre line, left-hand rotation
565 mm
Machine centre line to working equipment centre line, right-hand rotation
773 mm
Minimum turning radius
1,726 mm
Swing clearance, rear
785 mm
Working width at maximum right-hand rotation
1,808 mm
Working width at maximum left-hand rotation
1,599 mm
Make / model
Kubota / D1105-E4B-BCZ-1
Number of cylinders
1,123 cm3
Maximum power @ 2400 rpm (ISO 14396)
15.4 kW
Maximum torque (SAE)
71.2 Nm
Digging force, dipperstick (ISO 6015)
16,200 N
Digging force, long dipperstick (ISO 6015)
13,470 N
Digging force, bucket (ISO 6015)
23,720 N
Drawbar pull
29,023 N
Travel speed, low range
2.5 km/h
Travel speed, high range
4.3 km/h
Pump type
Dual outlet variable displacement piston pump with gear pumps
Total hydraulic capacity
87 L/min
Auxiliary flow
50 L/min
Auxiliary relief
180 bar
Boom swing, left
70 °
Boom swing, right
55 °
Slew rate
9.3 RPM
Cooling system
4.3 L
Engine lubrication plus oil filter
3.6 L
Fuel reservoir
34.4 L
Hydraulic reservoir
10.2 L
Hydraulic system
23 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.2 ms-2
Hand-arm vibration (ISO 5349–1)
0.5 ms-2
  • 1550 mm dozer blade
  • 300 mm rubber tracks
  • Adjustable double acting auxiliary hydraulic (AUX1) with Quick Couplers
  • Battery disconnect switch
  • Blade float feature
  • Clamp ready
  • Control console locks
  • Cupholder
  • Engine/hydraulic monitor with shutdown
  • Foldable and ergonomic pedals
  • Full fuel warning alarm
  • Grease gun holder
  • Horn
  • Machine IQ (telematic)
  • Proportional fingertip auxiliary and boom swing offset hydraulic control
  • Retractable seat belt
  • Suspension seat with high back
  • Storage compartment
  • TOPS/ROPS/FOPS canopy * (1)
  • Two-speed travel with Auto shift
  • Upper structure four-point tie down
  • Work light (boom)
  • Water separator
  • Warranty: 24 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • 1st AUX hydraulic on arm
  • 2nd AUX hydraulics
  • AM/FM MP3 stereo radio
  • Additional lights (2+1)
  • Auto idle
  • Beacon
  • Bobcat hydr. pin grabber
  • Bucket diverter valves (AUX3) kit
  • Case drain line
  • Clamp with AUX1 diverter for long arm
  • Dlx textile suspension seat
  • Direct-to-tank-AUX1 line
  • Object handling device (safety valves + overload warning device + lifteye)
  • Fire extinguisher
  • Hydr. coupler lines (AUX5)
  • Keyless ignition
  • Klac D and MS03 coupler
  • Left and right mirror
  • MS03/HS03 coupler or tilt coupler with lifteye
  • TOPS/ROPS/FOPS cab with heater
  • Travel motion alarm
  • Heavy counterweight
  • LED lights set
  • Long dipperstick with clamp eyes
  • Steel tracks
  • Tilt coupler lines (AUX4)
  • Tilt coupler lines (AUX4) with SAC control

Некоторые данные основаны на инженерных расчетах, а не на результатах измерений. Данные приведены только для целей сравнения и могут быть изменены без предварительного уведомления. Технические данные вашей машины Bobcat могут варьироваться в соответствии с обычными изменениями, которые могут быть внесены в конструкцию или технологию изготовления, а также в соответствии с условиями работы и другими факторами.