Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Mini Track Loaders / MT55 Mini Track Loader

Specifications & Options


Close/Open All PDF version
Rated operating capacity (ISO 5998)
254 kg
Tipping load (ISO 8313)
732 kg
Pump capacity
45.4 L/min
System relief at quick couplers
200 bar
Travel speed, reverse
2.3 km/h
Travel speed, forward
5.6 km/h
Make / Model
Kubota / D902-E3B
Power at 3600 RPM (ISO 9249)
18.5 kW
Torque at 2600 RPM (SAE J9249)
54.2 Nm
Number of cylinders
0.9 L
Fuel tank
26.5 L
Operating weight
1,186 kg
Shipping weight
1,109 kg
Angle of departure
23.3 °
Carry position
168 mm
Rollback at ground position
22 °
Dump angle at maximum height
49.6 °
Dump height with standard bucket
1,265 mm
Dump reach at maximum height
463 mm
Ground clearance
114 mm
Height to bucket hinge pin
1,807 mm
1,246 mm
Length without attachment
1,838 mm
Length with standard bucket
2,365 mm
Operating height
2,422 mm
Rollback fully raised at maximum height
82.3 °
Ground contact length
863 mm
Turning radius with standard bucket
1,395 mm
Width over tracks
903 mm
724 mm
Width over standard bucket, 36–inch
914 mm
Vehicle steering
Direction and speed controlled by one hand lever
Loader hydraulics tilt and lift
Hand lever
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
  • Auxiliary hydraulics
  • Bob-Tach™
  • Built-in tie down and crane/lift locations
  • Hydraulic drive train
  • Instrumentation
  • Lift arm lockout with manual bypass
  • Lift arm support
  • Neutral start interlocks
  • Parking brake
  • Reverse travel stop panel
  • Spark arrestor muffler
  • Tilt lockout
  • Tracks — rubber — 180 mm
  • CE certification
  • Warranty: 24 months or 2000 hours, whichever occurs first
    • Dealer Installed Options
      • Attachment control kit
      • Catalytic exhaust purifier
      • Engine block heater
      • Light kit
      • Ride-on platform
      • Shutdown kit
    Noise level LpA(EU Directive 2000/14/EC)
    88 dB(A)
    Noise level LWA(EU Directive 2000/14/EC)
    103 dB(A)
    Hand-arm vibration (ISO 5349–1)
    6.2 ms-2

    Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.